The property samsung,i2c-slave-addr in I2C9 controller on Exynos5250
Arndale and SMDK5250 boards, is not actually needed. There is only one
master on this bus. It's not clear why this property was added at first
place.
Tested-by: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
Signed-off-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
---
Changes since v1:
1. New patch, Marek already tested the removal so I am adding his tag.
---
arch/arm/boot/dts/exynos5250-arndale.dts | 1 -
arch/arm/boot/dts/exynos5250-smdk5250.dts | 1 -
2 files changed, 2 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index f2bcce167b2d..d37479ea4fa2 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -542,7 +542,6 @@
status = "okay";
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <40000>;
- samsung,i2c-slave-addr = <0x38>;
sata_phy_i2c: sata-phy@38 {
compatible = "samsung,exynos-sataphy-i2c";
diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
index 00af7fb65080..bd8827c69ff1 100644
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -326,7 +326,6 @@
status = "okay";
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <40000>;
- samsung,i2c-slave-addr = <0x38>;
sata_phy_i2c: sata-phy@38 {
compatible = "samsung,exynos-sataphy-i2c";
--
2.17.1
