Convert the Samsung S3FWRN5 NCI NFC controller bindings to dtschema.
This is conversion only so it includes properties with invalid prefixes
(s3fwrn5,en-gpios) which should be addressed later.
Signed-off-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
---
.../devicetree/bindings/net/nfc/s3fwrn5.txt | 25 --------
.../devicetree/bindings/net/nfc/s3fwrn5.yaml | 59 +++++++++++++++++++
MAINTAINERS | 1 +
3 files changed, 60 insertions(+), 25 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/net/nfc/s3fwrn5.txt
create mode 100644 Documentation/devicetree/bindings/net/nfc/s3fwrn5.yaml
diff --git a/Documentation/devicetree/bindings/net/nfc/s3fwrn5.txt b/Documentation/devicetree/bindings/net/nfc/s3fwrn5.txt
deleted file mode 100644
index f02f6fb7f81c..000000000000
--- a/Documentation/devicetree/bindings/net/nfc/s3fwrn5.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-* Samsung S3FWRN5 NCI NFC Controller
-
-Required properties:
-- compatible: Should be "samsung,s3fwrn5-i2c".
-- reg: address on the bus
-- interrupts: GPIO interrupt to which the chip is connected
-- s3fwrn5,en-gpios: Output GPIO pin used for enabling/disabling the chip
-- s3fwrn5,fw-gpios: Output GPIO pin used to enter firmware mode and
- sleep/wakeup control
-
-Example:
-
-&hsi2c_4 {
- s3fwrn5@27 {
- compatible = "samsung,s3fwrn5-i2c";
-
- reg = <0x27>;
-
- interrupt-parent = <&gpa1>;
- interrupts = <3 0 0>;
-
- s3fwrn5,en-gpios = <&gpf1 4 0>;
- s3fwrn5,fw-gpios = <&gpj0 2 0>;
- };
-};
diff --git a/Documentation/devicetree/bindings/net/nfc/s3fwrn5.yaml b/Documentation/devicetree/bindings/net/nfc/s3fwrn5.yaml
new file mode 100644
index 000000000000..c22451dea350
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/nfc/s3fwrn5.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/nfc/s3fwrn5.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S3FWRN5 NCI NFC Controller
+
+maintainers:
+ - Krzysztof Kozlowski <krzk@xxxxxxxxxx>
+ - Krzysztof Opasiak <k.opasiak@xxxxxxxxxxx>
+
+properties:
+ compatible:
+ const: samsung,s3fwrn5-i2c
+
+ interrupts:
+ maxItems: 1
+
+ reg:
+ maxItems: 1
+
+ s3fwrn5,en-gpios:
+ maxItems: 1
+ description:
+ Output GPIO pin used for enabling/disabling the chip
+
+ s3fwrn5,fw-gpios:
+ maxItems: 1
+ description:
+ Output GPIO pin used to enter firmware mode and sleep/wakeup control
+
+required:
+ - compatible
+ - interrupts
+ - reg
+ - s3fwrn5,en-gpios
+ - s3fwrn5,fw-gpios
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ s3fwrn5@27 {
+ compatible = "samsung,s3fwrn5-i2c";
+ reg = <0x27>;
+
+ interrupt-parent = <&gpa1>;
+ interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+
+ s3fwrn5,en-gpios = <&gpf1 4 GPIO_ACTIVE_HIGH>;
+ s3fwrn5,fw-gpios = <&gpj0 2 GPIO_ACTIVE_HIGH>;
+ };
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index ac79fdbdf8d0..91b3d5c349d8 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -15273,6 +15273,7 @@ M: Robert Baldyga <r.baldyga@xxxxxxxxxxx>
M: Krzysztof Opasiak <k.opasiak@xxxxxxxxxxx>
L: linux-nfc@xxxxxxxxxxxx (moderated for non-subscribers)
S: Supported
+F: Documentation/devicetree/bindings/net/nfc/s3fwrn5.yaml
F: drivers/nfc/s3fwrn5
SAMSUNG S5C73M3 CAMERA DRIVER
--
2.17.1
