Re: [PATCH v2 01/18] iio: accel: bma180: Simplify with dev_err_probe()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Aug 27, 2020 at 10:27 PM Krzysztof Kozlowski <krzk@xxxxxxxxxx> wrote:
>
> Common pattern of handling deferred probe can be simplified with
> dev_err_probe().  Less code and also it prints the error value.
>

Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>

> Signed-off-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
> ---
>  drivers/iio/accel/bma180.c | 20 ++++++++------------
>  1 file changed, 8 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/iio/accel/bma180.c b/drivers/iio/accel/bma180.c
> index 5b7a467c7b27..448faed001fd 100644
> --- a/drivers/iio/accel/bma180.c
> +++ b/drivers/iio/accel/bma180.c
> @@ -1000,19 +1000,15 @@ static int bma180_probe(struct i2c_client *client,
>                 return ret;
>
>         data->vdd_supply = devm_regulator_get(dev, "vdd");
> -       if (IS_ERR(data->vdd_supply)) {
> -               if (PTR_ERR(data->vdd_supply) != -EPROBE_DEFER)
> -                       dev_err(dev, "Failed to get vdd regulator %d\n",
> -                               (int)PTR_ERR(data->vdd_supply));
> -               return PTR_ERR(data->vdd_supply);
> -       }
> +       if (IS_ERR(data->vdd_supply))
> +               return dev_err_probe(dev, PTR_ERR(data->vdd_supply),
> +                                    "Failed to get vdd regulator\n");
> +
>         data->vddio_supply = devm_regulator_get(dev, "vddio");
> -       if (IS_ERR(data->vddio_supply)) {
> -               if (PTR_ERR(data->vddio_supply) != -EPROBE_DEFER)
> -                       dev_err(dev, "Failed to get vddio regulator %d\n",
> -                               (int)PTR_ERR(data->vddio_supply));
> -               return PTR_ERR(data->vddio_supply);
> -       }
> +       if (IS_ERR(data->vddio_supply))
> +               return dev_err_probe(dev, PTR_ERR(data->vddio_supply),
> +                                    "Failed to get vddio regulator\n");
> +
>         /* Typical voltage 2.4V these are min and max */
>         ret = regulator_set_voltage(data->vdd_supply, 1620000, 3600000);
>         if (ret)
> --
> 2.17.1
>


-- 
With Best Regards,
Andy Shevchenko



[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux for Synopsys ARC Processors]    
  • [Linux on Unisoc (RDA Micro) SoCs]     [Linux Actions SoC]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  •   Powered by Linux