Signed-off-by: Łukasz Stelmach <l.stelmach@xxxxxxxxxxx>
---
drivers/spi/spi-s3c64xx.c | 10 ++++++----
1 file changed, 6 insertions(+), 4 deletions(-)
diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c
index 6fe896f2be18..505789f91fdf 100644
--- a/drivers/spi/spi-s3c64xx.c
+++ b/drivers/spi/spi-s3c64xx.c
@@ -155,19 +155,21 @@ struct s3c64xx_spi_port_config {
* @clk: Pointer to the spi clock.
* @src_clk: Pointer to the clock used to generate SPI signals.
* @ioclk: Pointer to the i/o clock between master and slave
+ * @pdev: Pointer to the SPI controller platform device
* @master: Pointer to the SPI Protocol master.
* @cntrlr_info: Platform specific data for the controller this driver manages.
* @lock: Controller specific lock.
* @state: Set of FLAGS to indicate status.
- * @rx_dmach: Controller's DMA channel for Rx.
- * @tx_dmach: Controller's DMA channel for Tx.
+ * @rx_dma: Controller's DMA channel for Rx.
+ * @tx_dma: Controller's DMA channel for Tx.
* @sfr_start: BUS address of SPI controller regs.
* @regs: Pointer to ioremap'ed controller registers.
- * @irq: interrupt
* @xfer_completion: To indicate completion of xfer task.
* @cur_mode: Stores the active configuration of the controller.
* @cur_bpw: Stores the active bits per word settings.
* @cur_speed: Stores the active xfer clock speed.
+ * @port_conf: Pointer to the SPI port configuration
+ * @port_id: SPI port ID number
*/
struct s3c64xx_spi_driver_data {
void __iomem *regs;
@@ -176,7 +178,7 @@ struct s3c64xx_spi_driver_data {
struct clk *ioclk;
struct platform_device *pdev;
struct spi_master *master;
- struct s3c64xx_spi_info *cntrlr_info;
+ struct s3c64xx_spi_info *cntrlr_info;
spinlock_t lock;
unsigned long sfr_start;
struct completion xfer_completion;
--
2.26.2
