[PATCH v2] clk: samsung: Prevent potential endless loop in the PLL set_rate ops

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



In the .set_rate callback for some PLLs there is a loop polling state
of the PLL lock bit and it may become an endless loop when something
goes wrong with the PLL. For some PLLs there is already (a duplicated)
code for polling with timeout. This patch replaces that code with
the readl_relaxed_poll_timeout_atomic() macro and moves it to a common
helper function, which is then used for all the PLLs. The downside
of switching to the common macro is that we drop the cpu_relax() call.
Using a common helper function rather than the macro directly allows
to avoid repeating the error message in the code and to avoid the object
code size increase due to inlining.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx>
---
Changes for v2:
 - use common readl_relaxed_poll_timeout_atomic() macro
---
 drivers/clk/samsung/clk-pll.c | 92 +++++++++++++++----------------------------
 1 file changed, 32 insertions(+), 60 deletions(-)

diff --git a/drivers/clk/samsung/clk-pll.c b/drivers/clk/samsung/clk-pll.c
index ac70ad7..c3c1efe 100644
--- a/drivers/clk/samsung/clk-pll.c
+++ b/drivers/clk/samsung/clk-pll.c
@@ -9,13 +9,14 @@
 #include <linux/errno.h>
 #include <linux/hrtimer.h>
 #include <linux/delay.h>
+#include <linux/iopoll.h>
 #include <linux/slab.h>
 #include <linux/clk-provider.h>
 #include <linux/io.h>
 #include "clk.h"
 #include "clk-pll.h"
 
-#define PLL_TIMEOUT_MS		10
+#define PLL_TIMEOUT_US		10000U
 
 struct samsung_clk_pll {
 	struct clk_hw		hw;
@@ -63,6 +64,22 @@ static long samsung_pll_round_rate(struct clk_hw *hw,
 	return rate_table[i - 1].rate;
 }
 
+static int samsung_pll_lock_wait(struct samsung_clk_pll *pll,
+				 unsigned int reg_mask)
+{
+	u32 val;
+	int ret;
+
+	/* Wait until the PLL is in steady locked state */
+	ret = readl_relaxed_poll_timeout_atomic(pll->con_reg, val,
+					val & reg_mask, 0, PLL_TIMEOUT_US);
+	if (ret < 0)
+		pr_err("%s: Could not lock PLL %s\n",
+		       __func__, clk_hw_get_name(&pll->hw));
+
+	return ret;
+}
+
 static int samsung_pll3xxx_enable(struct clk_hw *hw)
 {
 	struct samsung_clk_pll *pll = to_clk_pll(hw);
@@ -241,12 +258,9 @@ static int samsung_pll35xx_set_rate(struct clk_hw *hw, unsigned long drate,
 	writel_relaxed(tmp, pll->con_reg);
 
 	/* Wait until the PLL is locked if it is enabled. */
-	if (tmp & BIT(pll->enable_offs)) {
-		do {
-			cpu_relax();
-			tmp = readl_relaxed(pll->con_reg);
-		} while (!(tmp & BIT(pll->lock_offs)));
-	}
+	if (tmp & BIT(pll->enable_offs))
+		return samsung_pll_lock_wait(pll, BIT(pll->lock_offs));
+
 	return 0;
 }
 
@@ -318,7 +332,7 @@ static int samsung_pll36xx_set_rate(struct clk_hw *hw, unsigned long drate,
 					unsigned long parent_rate)
 {
 	struct samsung_clk_pll *pll = to_clk_pll(hw);
-	u32 tmp, pll_con0, pll_con1;
+	u32 pll_con0, pll_con1;
 	const struct samsung_pll_rate_table *rate;
 
 	rate = samsung_get_pll_settings(pll, drate);
@@ -356,13 +370,8 @@ static int samsung_pll36xx_set_rate(struct clk_hw *hw, unsigned long drate,
 	pll_con1 |= rate->kdiv << PLL36XX_KDIV_SHIFT;
 	writel_relaxed(pll_con1, pll->con_reg + 4);
 
-	/* wait_lock_time */
-	if (pll_con0 & BIT(pll->enable_offs)) {
-		do {
-			cpu_relax();
-			tmp = readl_relaxed(pll->con_reg);
-		} while (!(tmp & BIT(pll->lock_offs)));
-	}
+	if (pll_con0 & BIT(pll->enable_offs))
+		return samsung_pll_lock_wait(pll, BIT(pll->lock_offs));
 
 	return 0;
 }
@@ -437,7 +446,6 @@ static int samsung_pll45xx_set_rate(struct clk_hw *hw, unsigned long drate,
 	struct samsung_clk_pll *pll = to_clk_pll(hw);
 	const struct samsung_pll_rate_table *rate;
 	u32 con0, con1;
-	ktime_t start;
 
 	/* Get required rate settings from table */
 	rate = samsung_get_pll_settings(pll, drate);
@@ -489,20 +497,7 @@ static int samsung_pll45xx_set_rate(struct clk_hw *hw, unsigned long drate,
 	writel_relaxed(con0, pll->con_reg);
 
 	/* Wait for locking. */
-	start = ktime_get();
-	while (!(readl_relaxed(pll->con_reg) & PLL45XX_LOCKED)) {
-		ktime_t delta = ktime_sub(ktime_get(), start);
-
-		if (ktime_to_ms(delta) > PLL_TIMEOUT_MS) {
-			pr_err("%s: could not lock PLL %s\n",
-					__func__, clk_hw_get_name(hw));
-			return -EFAULT;
-		}
-
-		cpu_relax();
-	}
-
-	return 0;
+	return samsung_pll_lock_wait(pll, PLL45XX_LOCKED);
 }
 
 static const struct clk_ops samsung_pll45xx_clk_ops = {
@@ -588,7 +583,6 @@ static int samsung_pll46xx_set_rate(struct clk_hw *hw, unsigned long drate,
 	struct samsung_clk_pll *pll = to_clk_pll(hw);
 	const struct samsung_pll_rate_table *rate;
 	u32 con0, con1, lock;
-	ktime_t start;
 
 	/* Get required rate settings from table */
 	rate = samsung_get_pll_settings(pll, drate);
@@ -648,20 +642,7 @@ static int samsung_pll46xx_set_rate(struct clk_hw *hw, unsigned long drate,
 	writel_relaxed(con1, pll->con_reg + 0x4);
 
 	/* Wait for locking. */
-	start = ktime_get();
-	while (!(readl_relaxed(pll->con_reg) & PLL46XX_LOCKED)) {
-		ktime_t delta = ktime_sub(ktime_get(), start);
-
-		if (ktime_to_ms(delta) > PLL_TIMEOUT_MS) {
-			pr_err("%s: could not lock PLL %s\n",
-					__func__, clk_hw_get_name(hw));
-			return -EFAULT;
-		}
-
-		cpu_relax();
-	}
-
-	return 0;
+	return samsung_pll_lock_wait(pll, PLL46XX_LOCKED);
 }
 
 static const struct clk_ops samsung_pll46xx_clk_ops = {
@@ -1035,14 +1016,9 @@ static int samsung_pll2550xx_set_rate(struct clk_hw *hw, unsigned long drate,
 			(rate->sdiv << PLL2550XX_S_SHIFT);
 	writel_relaxed(tmp, pll->con_reg);
 
-	/* wait_lock_time */
-	do {
-		cpu_relax();
-		tmp = readl_relaxed(pll->con_reg);
-	} while (!(tmp & (PLL2550XX_LOCK_STAT_MASK
-			<< PLL2550XX_LOCK_STAT_SHIFT)));
-
-	return 0;
+	/* Wait for locking. */
+	return samsung_pll_lock_wait(pll,
+			PLL2550XX_LOCK_STAT_MASK << PLL2550XX_LOCK_STAT_SHIFT);
 }
 
 static const struct clk_ops samsung_pll2550xx_clk_ops = {
@@ -1132,13 +1108,9 @@ static int samsung_pll2650x_set_rate(struct clk_hw *hw, unsigned long drate,
 	con1 |= ((rate->kdiv & PLL2650X_K_MASK) << PLL2650X_K_SHIFT);
 	writel_relaxed(con1, pll->con_reg + 4);
 
-	do {
-		cpu_relax();
-		con0 = readl_relaxed(pll->con_reg);
-	} while (!(con0 & (PLL2650X_LOCK_STAT_MASK
-			<< PLL2650X_LOCK_STAT_SHIFT)));
-
-	return 0;
+	/* Wait for locking. */
+	return samsung_pll_lock_wait(pll,
+			PLL2650X_LOCK_STAT_MASK << PLL2650X_LOCK_STAT_SHIFT);
 }
 
 static const struct clk_ops samsung_pll2650x_clk_ops = {
-- 
2.7.4




[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux for Synopsys ARC Processors]    
  • [Linux on Unisoc (RDA Micro) SoCs]     [Linux Actions SoC]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  •   Powered by Linux