[RFC 03/27] PCI: dwc: Allow overriding bridge pci_ops

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



In preparation to allow drivers to set their own root and child pci_ops
instead of using the DWC specific config space ops, we need to make
the pci_host_bridge pointer available and move setting the bridge->ops
and bridge->child_ops pointer to before the .host_init() hook.

Cc: Jingoo Han <jingoohan1@xxxxxxxxx>
Cc: Gustavo Pimentel <gustavo.pimentel@xxxxxxxxxxxx>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@xxxxxxx>
Cc: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
Signed-off-by: Rob Herring <robh@xxxxxxxxxx>
---
 drivers/pci/controller/dwc/pcie-designware-host.c | 15 ++++++++++-----
 drivers/pci/controller/dwc/pcie-designware.h      |  1 +
 2 files changed, 11 insertions(+), 5 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c
index 6232aefbbdb4..7cd8c9528d4c 100644
--- a/drivers/pci/controller/dwc/pcie-designware-host.c
+++ b/drivers/pci/controller/dwc/pcie-designware-host.c
@@ -344,6 +344,8 @@ int dw_pcie_host_init(struct pcie_port *pp)
 	if (!bridge)
 		return -ENOMEM;
 
+	pp->bridge = bridge;
+
 	ret = pci_parse_request_of_pci_ranges(dev, &bridge->windows,
 					      &bridge->dma_ranges, NULL);
 	if (ret)
@@ -450,6 +452,10 @@ int dw_pcie_host_init(struct pcie_port *pp)
 		}
 	}
 
+	/* Set default bus ops */
+	bridge->ops = &dw_pcie_ops;
+	bridge->child_ops = &dw_pcie_ops;
+
 	if (pp->ops->host_init) {
 		ret = pp->ops->host_init(pp);
 		if (ret)
@@ -461,7 +467,6 @@ int dw_pcie_host_init(struct pcie_port *pp)
 	bridge->dev.parent = dev;
 	bridge->sysdata = pp;
 	bridge->busnr = pp->root_bus_nr;
-	bridge->ops = &dw_pcie_ops;
 	bridge->map_irq = of_irq_parse_and_map_pci;
 	bridge->swizzle_irq = pci_common_swizzle;
 
@@ -667,11 +672,11 @@ void dw_pcie_setup_rc(struct pcie_port *pp)
 	dw_pcie_writel_dbi(pci, PCI_COMMAND, val);
 
 	/*
-	 * If the platform provides ->rd_other_conf, it means the platform
-	 * uses its own address translation component rather than ATU, so
-	 * we should not program the ATU here.
+	 * If the platform provides its own child bus config accesses, it means
+	 * the platform uses its own address translation component rather than
+	 * ATU, so we should not program the ATU here.
 	 */
-	if (!pp->ops->rd_other_conf) {
+	if (pp->bridge->child_ops == &dw_pcie_ops && !pp->ops->rd_other_conf) {
 		dw_pcie_prog_outbound_atu(pci, PCIE_ATU_REGION_INDEX0,
 					  PCIE_ATU_TYPE_MEM, pp->mem_base,
 					  pp->mem_bus_addr, pp->mem_size);
diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h
index 656e00f8fbeb..bad3cddab28e 100644
--- a/drivers/pci/controller/dwc/pcie-designware.h
+++ b/drivers/pci/controller/dwc/pcie-designware.h
@@ -201,6 +201,7 @@ struct pcie_port {
 	u32			num_vectors;
 	u32			irq_mask[MAX_MSI_CTRLS];
 	struct pci_bus		*root_bus;
+	struct pci_host_bridge  *bridge;
 	raw_spinlock_t		lock;
 	DECLARE_BITMAP(msi_irq_in_use, MAX_MSI_IRQS);
 };
-- 
2.25.1




[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux for Synopsys ARC Processors]    
  • [Linux on Unisoc (RDA Micro) SoCs]     [Linux Actions SoC]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  •   Powered by Linux