On 03-07-20, 22:41, Alim Akhtar wrote:
> +static const struct samsung_ufs_phy_cfg exynos7_post_init_cfg[] = {
> + END_UFS_PHY_CFG
> +};
This is dummy, why not add a check to make config optional?
> +static int samsung_ufs_phy_symbol_clk_init(struct samsung_ufs_phy *phy)
> +{
> + int ret = 0;
superfluous init, am sure I flagged it before as well
> +
> + phy->tx0_symbol_clk = devm_clk_get(phy->dev, "tx0_symbol_clk");
> + if (IS_ERR(phy->tx0_symbol_clk)) {
> + dev_err(phy->dev, "failed to get tx0_symbol_clk clock\n");
> + goto out;
> + }
> +
> + phy->rx0_symbol_clk = devm_clk_get(phy->dev, "rx0_symbol_clk");
> + if (IS_ERR(phy->rx0_symbol_clk)) {
> + dev_err(phy->dev, "failed to get rx0_symbol_clk clock\n");
> + goto out;
> + }
> +
> + phy->rx1_symbol_clk = devm_clk_get(phy->dev, "rx1_symbol_clk");
> + if (IS_ERR(phy->rx0_symbol_clk)) {
> + dev_err(phy->dev, "failed to get rx1_symbol_clk clock\n");
> + goto out;
> + }
> +
> + ret = clk_prepare_enable(phy->tx0_symbol_clk);
> + if (ret) {
> + dev_err(phy->dev, "%s: tx0_symbol_clk enable failed %d\n", __func__, ret);
> + goto out;
> + }
> +
> + ret = clk_prepare_enable(phy->rx0_symbol_clk);
> + if (ret) {
> + dev_err(phy->dev, "%s: rx0_symbol_clk enable failed %d\n", __func__, ret);
> + clk_disable_unprepare(phy->tx0_symbol_clk);
> + goto out;
> + }
> +
> + ret = clk_prepare_enable(phy->rx1_symbol_clk);
> + if (ret) {
> + dev_err(phy->dev, "%s: rx1_symbol_clk enable failed %d\n", __func__, ret);
> + clk_disable_unprepare(phy->tx0_symbol_clk);
> + clk_disable_unprepare(phy->rx0_symbol_clk);
maybe it will look better if we add common rollback and jump to proper
labels
> +static int samsung_ufs_phy_clks_init(struct samsung_ufs_phy *phy)
> +{
> + int ret;
> +
> + phy->ref_clk = devm_clk_get(phy->dev, "ref_clk");
> + if (IS_ERR(phy->ref_clk))
> + dev_err(phy->dev, "failed to get ref_clk clock\n");
> +
> + ret = clk_prepare_enable(phy->ref_clk);
> + if (ret) {
> + dev_err(phy->dev, "%s: ref_clk enable failed %d\n", __func__, ret);
> + return ret;
> + }
> +
> + dev_info(phy->dev, "UFS MPHY ref_clk_rate = %ld\n", clk_get_rate(phy->ref_clk));
debug pls
> +static int samsung_ufs_phy_init(struct phy *phy)
> +{
> + struct samsung_ufs_phy *_phy = get_samsung_ufs_phy(phy);
ss_phy perhaps?
> + int ret;
> +
> + _phy->lane_cnt = phy->attrs.bus_width;
> + _phy->ufs_phy_state = CFG_PRE_INIT;
> +
> + if (_phy->drvdata->has_symbol_clk) {
> + ret = samsung_ufs_phy_symbol_clk_init(_phy);
> + if (ret)
> + dev_err(_phy->dev, "failed to set ufs phy symbol clocks\n");
> + }
> +
> + ret = samsung_ufs_phy_clks_init(_phy);
> + if (ret)
> + dev_err(_phy->dev, "failed to set ufs phy clocks\n");
> +
> + samsung_ufs_phy_calibrate(phy);
> +
> + return 0;
not return samsung_ufs_phy_calibrate() ?
--
~Vinod
