The remaining i2c-gpio adapters that are common to all aries boards
have devices without mainline bindings attachted to them. Add them
here for documentation.
Signed-off-by: Jonathan Bakker <xc-racer2@xxxxxxx>
---
arch/arm/boot/dts/s5pv210-aries.dtsi | 69 ++++++++++++++++++++++++++++
1 file changed, 69 insertions(+)
diff --git a/arch/arm/boot/dts/s5pv210-aries.dtsi b/arch/arm/boot/dts/s5pv210-aries.dtsi
index 046366d58aa0..a3748705dce8 100644
--- a/arch/arm/boot/dts/s5pv210-aries.dtsi
+++ b/arch/arm/boot/dts/s5pv210-aries.dtsi
@@ -13,10 +13,13 @@
aliases {
i2c4 = &i2c_sound;
+ i2c5 = &i2c_accel;
i2c6 = &i2c_pmic;
i2c7 = &i2c_musb;
i2c9 = &i2c_fuel;
i2c10 = &i2c_touchkey;
+ i2c11 = &i2c_prox;
+ i2c12 = &i2c_magnetometer;
};
memory@30000000 {
@@ -120,6 +123,22 @@
};
};
+ i2c_accel: i2c-gpio-1 {
+ compatible = "i2c-gpio";
+ sda-gpios = <&gpj3 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&gpj3 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ i2c-gpio,delay-us = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&accel_i2c_pins>;
+
+ status = "disabled";
+
+ /* bma023 accelerometer, no mainline binding */
+ };
+
i2c_pmic: i2c-gpio-2 {
compatible = "i2c-gpio";
sda-gpios = <&gpj4 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
@@ -435,6 +454,38 @@
};
};
+ i2c_prox: i2c-gpio-6 {
+ compatible = "i2c-gpio";
+ sda-gpios = <&gpg2 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&gpg0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ i2c-gpio,delay-us = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&prox_i2c_pins>;
+
+ status = "disabled";
+
+ /* Sharp gp2a prox/light sensor, incomplete mainline binding */
+ };
+
+ i2c_magnetometer: i2c-gpio-7 {
+ compatible = "i2c-gpio";
+ sda-gpios = <&gpj0 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&gpj0 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ i2c-gpio,delay-us = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&magnetometer_i2c_pins>;
+
+ status = "disabled";
+
+ /* Yamaha yas529 magnetometer, no mainline binding */
+ };
+
vibrator: pwm-vibrator {
compatible = "pwm-vibrator";
pwms = <&pwm 1 44642 0>;
@@ -546,6 +597,12 @@
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
+ prox_i2c_pins: gp2a-i2c-pins {
+ samsung,pins = "gpg0-2", "gpg2-2";
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ };
+
wlan_gpio_rst: wlan-gpio-rst {
samsung,pins = "gpg1-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
@@ -586,6 +643,12 @@
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
+ magnetometer_i2c_pins: yas529-i2c-pins {
+ samsung,pins = "gpj0-0", "gpj0-1";
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ };
+
ts_irq: ts-irq {
samsung,pins = "gpj0-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
@@ -611,6 +674,12 @@
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
+ accel_i2c_pins: accel-i2c-pins {
+ samsung,pins = "gpj3-6", "gpj3-7";
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ };
+
pmic_i2c_pins: pmic-i2c-pins {
samsung,pins = "gpj4-0", "gpj4-3";
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
--
2.20.1
