Re: [PATCH 10/13] arm: dts: s5pv210: aries: Enable ADC node

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sun, Apr 26, 2020 at 11:36:01AM -0700, Jonathan Bakker wrote:
> On aries boards, the ADC is used for things such as jack detection
> and battery temperature monitoring.  It is connected to ldo4 of max8998,
> so only enable that regulator when we are actually using the ADC.
> 
> Signed-off-by: Jonathan Bakker <xc-racer2@xxxxxxx>
> ---
>  arch/arm/boot/dts/s5pv210-aries.dtsi | 11 ++++++-----
>  1 file changed, 6 insertions(+), 5 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/s5pv210-aries.dtsi b/arch/arm/boot/dts/s5pv210-aries.dtsi
> index f30bdcb9c083..a103ddb0d720 100644
> --- a/arch/arm/boot/dts/s5pv210-aries.dtsi
> +++ b/arch/arm/boot/dts/s5pv210-aries.dtsi
> @@ -193,11 +193,6 @@
>  					regulator-name = "VADC_3.3V";
>  					regulator-min-microvolt = <3300000>;
>  					regulator-max-microvolt = <3300000>;
> -					regulator-always-on;
> -
> -					regulator-state-mem {
> -						regulator-off-in-suspend;
> -					};

I would expect to keep it disabled during suspend. Why you had to remove
this part?

Best regards,
Krzysztof




[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux for Synopsys ARC Processors]    
  • [Linux on Unisoc (RDA Micro) SoCs]     [Linux Actions SoC]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  •   Powered by Linux