On 2020-04-18 01:59, Alim Akhtar wrote:
Some host controllers don't support host controller enable via HCE.
Signed-off-by: Seungwon Jeon <essuuj@xxxxxxxxx>
Signed-off-by: Alim Akhtar <alim.akhtar@xxxxxxxxxxx>
They are back again finally...
Reviewd-by: Can Guo <cang@xxxxxxxxxxxxxx>
---
drivers/scsi/ufs/ufshcd.c | 76 +++++++++++++++++++++++++++++++++++++--
drivers/scsi/ufs/ufshcd.h | 6 ++++
2 files changed, 80 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 0e9704da58bd..ee30ed6cc805 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -3534,6 +3534,52 @@ static int ufshcd_dme_link_startup(struct
ufs_hba *hba)
"dme-link-startup: error code %d\n", ret);
return ret;
}
+/**
+ * ufshcd_dme_reset - UIC command for DME_RESET
+ * @hba: per adapter instance
+ *
+ * DME_RESET command is issued in order to reset UniPro stack.
+ * This function now deal with cold reset.
+ *
+ * Returns 0 on success, non-zero value on failure
+ */
+static int ufshcd_dme_reset(struct ufs_hba *hba)
+{
+ struct uic_command uic_cmd = {0};
+ int ret;
+
+ uic_cmd.command = UIC_CMD_DME_RESET;
+
+ ret = ufshcd_send_uic_cmd(hba, &uic_cmd);
+ if (ret)
+ dev_err(hba->dev,
+ "dme-reset: error code %d\n", ret);
+
+ return ret;
+}
+
+/**
+ * ufshcd_dme_enable - UIC command for DME_ENABLE
+ * @hba: per adapter instance
+ *
+ * DME_ENABLE command is issued in order to enable UniPro stack.
+ *
+ * Returns 0 on success, non-zero value on failure
+ */
+static int ufshcd_dme_enable(struct ufs_hba *hba)
+{
+ struct uic_command uic_cmd = {0};
+ int ret;
+
+ uic_cmd.command = UIC_CMD_DME_ENABLE;
+
+ ret = ufshcd_send_uic_cmd(hba, &uic_cmd);
+ if (ret)
+ dev_err(hba->dev,
+ "dme-reset: error code %d\n", ret);
+
+ return ret;
+}
static inline void ufshcd_add_delay_before_dme_cmd(struct ufs_hba
*hba)
{
@@ -4251,7 +4297,7 @@ static inline void ufshcd_hba_stop(struct
ufs_hba *hba, bool can_sleep)
}
/**
- * ufshcd_hba_enable - initialize the controller
+ * ufshcd_hba_execute_hce - initialize the controller
* @hba: per adapter instance
*
* The controller resets itself and controller firmware initialization
@@ -4260,7 +4306,7 @@ static inline void ufshcd_hba_stop(struct
ufs_hba *hba, bool can_sleep)
*
* Returns 0 on success, non-zero value on failure
*/
-int ufshcd_hba_enable(struct ufs_hba *hba)
+static int ufshcd_hba_execute_hce(struct ufs_hba *hba)
{
int retry;
@@ -4308,6 +4354,32 @@ int ufshcd_hba_enable(struct ufs_hba *hba)
return 0;
}
+
+int ufshcd_hba_enable(struct ufs_hba *hba)
+{
+ int ret;
+
+ if (hba->quirks & UFSHCI_QUIRK_BROKEN_HCE) {
+ ufshcd_set_link_off(hba);
+ ufshcd_vops_hce_enable_notify(hba, PRE_CHANGE);
+
+ /* enable UIC related interrupts */
+ ufshcd_enable_intr(hba, UFSHCD_UIC_MASK);
+ ret = ufshcd_dme_reset(hba);
+ if (!ret) {
+ ret = ufshcd_dme_enable(hba);
+ if (!ret)
+ ufshcd_vops_hce_enable_notify(hba, POST_CHANGE);
+ if (ret)
+ dev_err(hba->dev,
+ "Host controller enable failed with non-hce\n");
+ }
+ } else {
+ ret = ufshcd_hba_execute_hce(hba);
+ }
+
+ return ret;
+}
EXPORT_SYMBOL_GPL(ufshcd_hba_enable);
static int ufshcd_disable_tx_lcc(struct ufs_hba *hba, bool peer)
diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
index 53096642f9a8..f8d08cb9caf7 100644
--- a/drivers/scsi/ufs/ufshcd.h
+++ b/drivers/scsi/ufs/ufshcd.h
@@ -529,6 +529,12 @@ enum ufshcd_quirks {
* that the interrupt aggregation timer and counter are reset by s/w.
*/
UFSHCI_QUIRK_SKIP_RESET_INTR_AGGR = 1 << 7,
+
+ /*
+ * This quirks needs to be enabled if host controller cannot be
+ * enabled via HCE register.
+ */
+ UFSHCI_QUIRK_BROKEN_HCE = 1 << 8,
};
enum ufshcd_caps {