Re: [PATCH v6 2/2] tty: samsung_tty: 32-bit access for TX/RX hold registers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Apr 07, 2020 at 06:49:29AM +0200, Jiri Slaby wrote:
> On 07. 04. 20, 1:08, Hyunki Koo wrote:
> > Support 32-bit access for the TX/RX hold registers UTXH and URXH.
> > 
> > This is required for some newer SoCs.
> > 
> > Signed-off-by: Hyunki Koo <hyunki00.koo@xxxxxxxxxxx>
> ...
> > ---
> >  drivers/tty/serial/samsung_tty.c | 76 +++++++++++++++++++++++++++++++++-------
> >  1 file changed, 64 insertions(+), 12 deletions(-)
> > 
> > diff --git a/drivers/tty/serial/samsung_tty.c b/drivers/tty/serial/samsung_tty.c
> > index 73f951d65b93..bdf1d4d12cb1 100644
> > --- a/drivers/tty/serial/samsung_tty.c
> > +++ b/drivers/tty/serial/samsung_tty.c
> > @@ -154,12 +154,47 @@ struct s3c24xx_uart_port {
> ...
> > -#define wr_regb(port, reg, val) writeb_relaxed(val, portaddr(port, reg))
> > +static void wr_reg(struct uart_port *port, u32 reg, u32 val)
> > +{
> > +	switch (port->iotype) {
> > +	case UPIO_MEM:
> > +		writeb_relaxed(val, portaddr(port, reg));
> > +		break;
> > +	case UPIO_MEM32:
> > +		writel_relaxed(val, portaddr(port, reg));
> > +		break;
> > +	}
> > +}
> > +
> >  #define wr_regl(port, reg, val) writel_relaxed(val, portaddr(port, reg))
> >  
> > +static void wr_reg_barrier(struct uart_port *port, u32 reg, u32 val)
> 
> You need to explain, why you need this _barrier variant now. This change
> should be done in a separate patch too.

There is no functional change in regard of barrier.  The ordered IO was
used there before.

Best regards,
Krzysztof




[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux for Synopsys ARC Processors]    
  • [Linux on Unisoc (RDA Micro) SoCs]     [Linux Actions SoC]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  •   Powered by Linux