[PATCH v2 1/4] ARM: dts: exynos: Enable WLAN support for the UniversalC210 board

[Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>]

Add a node for BCM4330/2 SDIO chip on SDHCI bus #3 and the required MMC
power sequence node for the Exynos4210-based UniversalC210 board.

Signed-off-by: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
---
 .../boot/dts/exynos4210-universal_c210.dts    | 28 +++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts
index 9dda6bdb9253..c78423a2d10f 100644
--- a/arch/arm/boot/dts/exynos4210-universal_c210.dts
+++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts
@@ -50,6 +50,11 @@
 		enable-active-high;
 	};
 
+	wlan_pwrseq: sdhci3-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpe3 1 GPIO_ACTIVE_LOW>;
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 
@@ -563,6 +568,29 @@
 	status = "okay";
 };
 
+&sdhci_3 {
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	non-removable;
+	bus-width = <4>;
+	mmc-pwrseq = <&wlan_pwrseq>;
+	vmmc-supply = <&ldo5_reg>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd3_clk>, <&sd3_cmd>, <&sd3_bus4>;
+
+	brcmf: wifi@1 {
+		compatible = "brcm,bcm4330-fmac";
+		reg = <1>;
+		interrupt-parent = <&gpx2>;
+		interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wake";
+	};
+};
+
 &serial_0 {
 	status = "okay";
 	/delete-property/dmas;
-- 
2.17.1