Hi,
If possible, you better to write the more correct patch title
because 'Clean up code' is too comprehensive.
And please add 'PM / devfreq: ...' prefix for the devfreq patch.
When you check the merged patches of driver/devfreq/,
you can know the this prefix for patch title was used.
On 12/16/19 7:19 PM, Artur Świgoń wrote:
> This patch improves code readability by changing the following construct:
>
>> if (cond)
>> goto passive;
>> foo();
>> goto out;
>> passive:
>> bar();
>> out:
>
> into this:
>
>> if (cond)
>> bar();
>> else
>> foo();
When you add the example, please remove '>' char.
>
> as well as eliminating a few more goto statements and fixing header
> includes.
And better to write what to fix the header including.
>
> Signed-off-by: Artur Świgoń <a.swigon@xxxxxxxxxxx>
> ---
> drivers/devfreq/exynos-bus.c | 54 +++++++++++++-----------------------
> 1 file changed, 19 insertions(+), 35 deletions(-)
>
> diff --git a/drivers/devfreq/exynos-bus.c b/drivers/devfreq/exynos-bus.c
> index 19d9f9f8ced2..7f5917d59072 100644
> --- a/drivers/devfreq/exynos-bus.c
> +++ b/drivers/devfreq/exynos-bus.c
> @@ -15,11 +15,10 @@
> #include <linux/device.h>
> #include <linux/export.h>
> #include <linux/module.h>
> -#include <linux/of_device.h>
> +#include <linux/of.h>
> #include <linux/pm_opp.h>
> #include <linux/platform_device.h>
> #include <linux/regulator/consumer.h>
> -#include <linux/slab.h>
>
> #define DEFAULT_SATURATION_RATIO 40
>
> @@ -301,10 +300,9 @@ static int exynos_bus_profile_init(struct exynos_bus *bus,
> profile->exit = exynos_bus_exit;
>
> ondemand_data = devm_kzalloc(dev, sizeof(*ondemand_data), GFP_KERNEL);
> - if (!ondemand_data) {
> - ret = -ENOMEM;
> - goto err;
> - }
> + if (!ondemand_data)
> + return -ENOMEM;
> +
> ondemand_data->upthreshold = 40;
> ondemand_data->downdifferential = 5;
>
> @@ -314,15 +312,14 @@ static int exynos_bus_profile_init(struct exynos_bus *bus,
> ondemand_data);
> if (IS_ERR(bus->devfreq)) {
> dev_err(dev, "failed to add devfreq device\n");
> - ret = PTR_ERR(bus->devfreq);
> - goto err;
> + return PTR_ERR(bus->devfreq);
> }
>
> /* Register opp_notifier to catch the change of OPP */
> ret = devm_devfreq_register_opp_notifier(dev, bus->devfreq);
> if (ret < 0) {
> dev_err(dev, "failed to register opp notifier\n");
> - goto err;
> + return ret;
> }
>
> /*
> @@ -332,17 +329,16 @@ static int exynos_bus_profile_init(struct exynos_bus *bus,
> ret = exynos_bus_enable_edev(bus);
> if (ret < 0) {
> dev_err(dev, "failed to enable devfreq-event devices\n");
> - goto err;
> + return ret;
> }
>
> ret = exynos_bus_set_event(bus);
> if (ret < 0) {
> dev_err(dev, "failed to set event to devfreq-event devices\n");
> - goto err;
> + return ret;
> }
>
> -err:
> - return ret;
> + return 0;
> }
>
> static int exynos_bus_profile_init_passive(struct exynos_bus *bus,
> @@ -351,7 +347,6 @@ static int exynos_bus_profile_init_passive(struct exynos_bus *bus,
> struct device *dev = bus->dev;
> struct devfreq_passive_data *passive_data;
> struct devfreq *parent_devfreq;
> - int ret = 0;
>
> /* Initialize the struct profile and governor data for passive device */
> profile->target = exynos_bus_target;
> @@ -359,16 +354,13 @@ static int exynos_bus_profile_init_passive(struct exynos_bus *bus,
>
> /* Get the instance of parent devfreq device */
> parent_devfreq = devfreq_get_devfreq_by_phandle(dev, 0);
> - if (IS_ERR(parent_devfreq)) {
> - ret = -EPROBE_DEFER;
> - goto err;
> - }
> + if (IS_ERR(parent_devfreq))
> + return -EPROBE_DEFER;
>
> passive_data = devm_kzalloc(dev, sizeof(*passive_data), GFP_KERNEL);
> - if (!passive_data) {
> - ret = -ENOMEM;
> - goto err;
> - }
> + if (!passive_data)
> + return -ENOMEM;
> +
> passive_data->parent = parent_devfreq;
>
> /* Add devfreq device for exynos bus with passive governor */
> @@ -377,12 +369,10 @@ static int exynos_bus_profile_init_passive(struct exynos_bus *bus,
> if (IS_ERR(bus->devfreq)) {
> dev_err(dev,
> "failed to add devfreq dev with passive governor\n");
> - ret = PTR_ERR(bus->devfreq);
> - goto err;
> + return PTR_ERR(bus->devfreq);
> }
>
> -err:
> - return ret;
> + return 0;
> }
>
> static int exynos_bus_probe(struct platform_device *pdev)
> @@ -427,19 +417,13 @@ static int exynos_bus_probe(struct platform_device *pdev)
> goto err_reg;
>
> if (passive)
> - goto passive;
> -
> - ret = exynos_bus_profile_init(bus, profile);
> - if (ret < 0)
> - goto err;
> + ret = exynos_bus_profile_init_passive(bus, profile);
> + else
> + ret = exynos_bus_profile_init(bus, profile);
>
> - goto out;
> -passive:
> - ret = exynos_bus_profile_init_passive(bus, profile);
> if (ret < 0)
> goto err;
>
> -out:
> max_state = bus->devfreq->profile->max_state;
> min_freq = (bus->devfreq->profile->freq_table[0] / 1000);
> max_freq = (bus->devfreq->profile->freq_table[max_state - 1] / 1000);
>
--
Best Regards,
Chanwoo Choi
Samsung Electronics
