On Wed, Dec 11, 2019 at 10:52 PM Marek Szyprowski <m.szyprowski@xxxxxxxxxxx> wrote: > > Current USB3503 driver ignores GPIO polarity and always operates as if the > GPIO lines were flagged as ACTIVE_HIGH. Fix the polarity for the existing > USB3503 chip applications to match the chip specification and common > convention for naming the pins. The only pin, which has to be ACTIVE_LOW > is the reset pin. The remaining are ACTIVE_HIGH. This change allows later > to fix the USB3503 driver to properly use generic GPIO bindings and read > polarity from DT. > > Signed-off-by: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx> Acked-by: Chen-Yu Tsai <wens@xxxxxxxx> I assume the dts patch has to go in before or at the same time as the driver patch?
