Cc: Stephen and Michael
On 11/21/19 11:11, Marek Szyprowski wrote:
> All top clocks on G3D path has to be enabled all the time to allow proper
> G3D power domain operation. This is achieved by adding CRITICAL flag to
> "mout_sw_aclk_g3d" clock, what keeps this clock and all its parents
> enabled.
>
> This fixes following imprecise abort issue observed on Odroid XU3/XU4
> after enabling Panfrost driver by commit 1a5a85c56402 "ARM: dts: exynos:
> Add Mali/GPU node on Exynos5420 and enable it on Odroid XU3/4"):
>
> panfrost 11800000.gpu: clock rate = 400000000
> panfrost 11800000.gpu: failed to get regulator: -517
> panfrost 11800000.gpu: regulator init failed -517
> Power domain G3D disable failed
> ...
> panfrost 11800000.gpu: clock rate = 400000000
> 8<--- cut here ---
> Unhandled fault: imprecise external abort (0x1406) at 0x00000000
> pgd = (ptrval)
> [00000000] *pgd=00000000
> Internal error: : 1406 [#1] PREEMPT SMP ARM
> Modules linked in:
> CPU: 7 PID: 53 Comm: kworker/7:1 Not tainted 5.4.0-rc8-next-20191119-00032-g56f1001191a6 #6923
> Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
> Workqueue: events deferred_probe_work_func
> PC is at panfrost_gpu_soft_reset+0x94/0x110
> LR is at ___might_sleep+0x128/0x2dc
> ...
> [<c05c231c>] (panfrost_gpu_soft_reset) from [<c05c2704>] (panfrost_gpu_init+0x10/0x67c)
> [<c05c2704>] (panfrost_gpu_init) from [<c05c15d0>] (panfrost_device_init+0x158/0x2cc)
> [<c05c15d0>] (panfrost_device_init) from [<c05c0cb0>] (panfrost_probe+0x80/0x178)
> [<c05c0cb0>] (panfrost_probe) from [<c05cfaa0>] (platform_drv_probe+0x48/0x9c)
> [<c05cfaa0>] (platform_drv_probe) from [<c05cd20c>] (really_probe+0x1c4/0x474)
> [<c05cd20c>] (really_probe) from [<c05cd694>] (driver_probe_device+0x78/0x1bc)
> [<c05cd694>] (driver_probe_device) from [<c05cb374>] (bus_for_each_drv+0x74/0xb8)
> [<c05cb374>] (bus_for_each_drv) from [<c05ccfa8>] (__device_attach+0xd4/0x16c)
> [<c05ccfa8>] (__device_attach) from [<c05cc110>] (bus_probe_device+0x88/0x90)
> [<c05cc110>] (bus_probe_device) from [<c05cc634>] (deferred_probe_work_func+0x4c/0xd0)
> [<c05cc634>] (deferred_probe_work_func) from [<c0149df0>] (process_one_work+0x300/0x864)
> [<c0149df0>] (process_one_work) from [<c014a3ac>] (worker_thread+0x58/0x5a0)
> [<c014a3ac>] (worker_thread) from [<c0151174>] (kthread+0x12c/0x160)
> [<c0151174>] (kthread) from [<c01010b4>] (ret_from_fork+0x14/0x20)
> Exception stack(0xee03dfb0 to 0xee03dff8)
> ...
> Code: e594300c e5933020 e3130c01 1a00000f (ebefff50).
> ---[ end trace badde2b74a65a540 ]---
>
> In the above case, the Panfrost driver disables G3D clocks after failure
> of getting the needed regulator and return with -EPROVE_DEFER code. This
> causes G3D power domain disable failure and then, during second probe
> an imprecise abort is triggered due to undefined power domain state.
>
> Fixes: 45f10dabb56b ("clk: samsung: exynos5420: Add SET_RATE_PARENT flag to clocks on G3D path")
> Fixes: c9f7567aff31 ("clk: samsung: exynos542x: Move G3D subsystem clocks to its sub-CMU")
> Signed-off-by: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
> ---
> drivers/clk/samsung/clk-exynos5420.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/clk/samsung/clk-exynos5420.c b/drivers/clk/samsung/clk-exynos5420.c
> index 3a991ca1ee36..89126ba66995 100644
> --- a/drivers/clk/samsung/clk-exynos5420.c
> +++ b/drivers/clk/samsung/clk-exynos5420.c
> @@ -712,7 +712,7 @@ static const struct samsung_mux_clock exynos5x_mux_clks[] __initconst = {
> MUX(0, "mout_sw_aclk266_g2d", mout_sw_aclk266_g2d_p,
> SRC_TOP12, 12, 1),
> MUX_F(0, "mout_sw_aclk_g3d", mout_sw_aclk_g3d_p, SRC_TOP12, 16, 1,
> - CLK_SET_RATE_PARENT, 0),
> + CLK_IS_CRITICAL | CLK_SET_RATE_PARENT, 0),
> MUX(0, "mout_sw_aclk300_jpeg", mout_sw_aclk300_jpeg_p,
SRC_TOP12, 20, 1),
Adding that flag to a mux clock doesn't look right, it feels we are not
addressing the issue properly and the root cause is not known.
AFAICS CLK_IS_CRITICAL flag will also not ensure required root clock up
in the clk tree is enabled in case any reparenting is done after that mux
clock has been registered. The flag seems misused and the fix looks dubious
and fragile to me.
I would apply that to fix crashes we are seeing in -next but we ned to come
up with a better solution.
Perhaps we could add a comment like:
"CLK_IS_CRITICAL flag is added to this clock as a workaround for imprecise
external abort triggered by the Panfrost driver and will be removed once
the issue is properly addressed."
Can you resend with Stephen and Mike at Cc and with that comment added?
Feel free to add
Acked-by: Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx>
Alternatively, we could add an explicit clk_prepare_enable() call at the end
of exynos5x_clk_init() function, after the clock provider is registered,
so any possible reparenting through "assigned-clock-parents" is also taken
into account.
--
Thanks,
Sylwester
