Hi Hayes,
On 16.10.2019 05:02, Hayes Wang wrote:
> This patch supports loading additional firmware file through
> request_firmware().
>
> A firmware file may include a header followed by several blocks
> which have different types of firmware. Currently, the supported
> types are RTL_FW_END, RTL_FW_PLA, and RTL_FW_USB.
>
> The firmware is used to fix some compatible or hardware issues. For
> example, the device couldn't be found after rebooting several times.
>
> The supported chips are
> RTL_VER_04 (rtl8153a-2.fw)
> RTL_VER_05 (rtl8153a-3.fw)
> RTL_VER_06 (rtl8153a-4.fw)
> RTL_VER_09 (rtl8153b-2.fw)
>
> Signed-off-by: Hayes Wang <hayeswang@xxxxxxxxxxx>
> Reviewed-by: Prashant Malani <pmalani@xxxxxxxxxxxx>
This patch (which landed in linux-next last days) causes a following
kernel oops on the ARM 32bit Exynos5422 SoC based Odroid XU4 board:
usb 6-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
usb 6-1: New USB device found, idVendor=0bda, idProduct=8153,
bcdDevice=30.00
usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6
usb 6-1: Product: USB 10/100/1000 LAN
usb 6-1: Manufacturer: Realtek
usb 6-1: SerialNumber: 000001000000
usb 6-1: reset SuperSpeed Gen 1 USB device number 2 using xhci-hcd
r8152 6-1:1.0: Direct firmware load for rtl_nic/rtl8153a-3.fw failed
with error -2
r8152 6-1:1.0: unable to load firmware patch rtl_nic/rtl8153a-3.fw (-2)
8<--- cut here ---
Unable to handle kernel NULL pointer dereference at virtual address 00000002
pgd = (ptrval)
[00000002] *pgd=00000000
Internal error: Oops: 5 [#1] PREEMPT SMP ARM
Modules linked in:
CPU: 0 PID: 131 Comm: kworker/0:2 Not tainted
5.4.0-rc1-00539-g9370f2d05a2a #6788
Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
Workqueue: events_long rtl_hw_phy_work_func_t
PC is at rtl8152_apply_firmware+0x14/0x464
LR is at r8153_hw_phy_cfg+0x24/0x17c
pc : [<c064f4e4>] lr : [<c064fa18>] psr: a0000013
sp : e75c9e60 ip : 60000013 fp : c11b7614
r10: e883b91c r9 : 00000000 r8 : fffffffe
r7 : e883b640 r6 : fffffffe r5 : fffffffe r4 : e883b640
r3 : 736cfe7c r2 : 736cfe7c r1 : 000052f8 r0 : e883b640
Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
Control: 10c5387d Table: 6640006a DAC: 00000051
Process kworker/0:2 (pid: 131, stack limit = 0x(ptrval))
Stack: (0xe75c9e60 to 0xe75ca000)
...
[<c064f4e4>] (rtl8152_apply_firmware) from [<c064fa18>]
(r8153_hw_phy_cfg+0x24/0x17c)
[<c064fa18>] (r8153_hw_phy_cfg) from [<c064e784>]
(rtl_hw_phy_work_func_t+0x220/0x3e4)
[<c064e784>] (rtl_hw_phy_work_func_t) from [<c0148a74>]
(process_one_work+0x22c/0x7c8)
[<c0148a74>] (process_one_work) from [<c0149054>] (worker_thread+0x44/0x520)
[<c0149054>] (worker_thread) from [<c0150548>] (kthread+0x130/0x164)
[<c0150548>] (kthread) from [<c01010b4>] (ret_from_fork+0x14/0x20)
Exception stack(0xe75c9fb0 to 0xe75c9ff8)
...
---[ end trace 0995684a5160c8b5 ]---
I don't have firmware files for that chip, but the driver shouldn't
crash in such case.
> ---
> drivers/net/usb/r8152.c | 768 +++++++++++++++++++++++++++++++++++++++-
> 1 file changed, 756 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
> index 54a83f734ede..55d0bcb00aef 100644
> --- a/drivers/net/usb/r8152.c
> +++ b/drivers/net/usb/r8152.c
> @@ -24,9 +24,11 @@
> #include <linux/suspend.h>
> #include <linux/atomic.h>
> #include <linux/acpi.h>
> +#include <linux/firmware.h>
> +#include <crypto/hash.h>
>
> /* Information for net-next */
> -#define NETNEXT_VERSION "10"
> +#define NETNEXT_VERSION "11"
>
> /* Information for net */
> #define NET_VERSION "10"
> @@ -54,8 +56,11 @@
> #define PLA_BDC_CR 0xd1a0
> #define PLA_TEREDO_TIMER 0xd2cc
> #define PLA_REALWOW_TIMER 0xd2e8
> +#define PLA_UPHY_TIMER 0xd388
> #define PLA_SUSPEND_FLAG 0xd38a
> #define PLA_INDICATE_FALG 0xd38c
> +#define PLA_MACDBG_PRE 0xd38c /* RTL_VER_04 only */
> +#define PLA_MACDBG_POST 0xd38e /* RTL_VER_04 only */
> #define PLA_EXTRA_STATUS 0xd398
> #define PLA_EFUSE_DATA 0xdd00
> #define PLA_EFUSE_CMD 0xdd02
> @@ -110,7 +115,12 @@
> #define USB_CONNECT_TIMER 0xcbf8
> #define USB_MSC_TIMER 0xcbfc
> #define USB_BURST_SIZE 0xcfc0
> +#define USB_FW_FIX_EN0 0xcfca
> +#define USB_FW_FIX_EN1 0xcfcc
> #define USB_LPM_CONFIG 0xcfd8
> +#define USB_CSTMR 0xcfef /* RTL8153A */
> +#define USB_FW_CTRL 0xd334 /* RTL8153B */
> +#define USB_FC_TIMER 0xd340
> #define USB_USB_CTRL 0xd406
> #define USB_PHY_CTRL 0xd408
> #define USB_TX_AGG 0xd40a
> @@ -126,6 +136,7 @@
> #define USB_LPM_CTRL 0xd41a
> #define USB_BMU_RESET 0xd4b0
> #define USB_U1U2_TIMER 0xd4da
> +#define USB_FW_TASK 0xd4e8 /* RTL8153B */
> #define USB_UPS_CTRL 0xd800
> #define USB_POWER_CUT 0xd80a
> #define USB_MISC_0 0xd81a
> @@ -133,18 +144,19 @@
> #define USB_AFE_CTRL2 0xd824
> #define USB_UPS_CFG 0xd842
> #define USB_UPS_FLAGS 0xd848
> +#define USB_WDT1_CTRL 0xe404
> #define USB_WDT11_CTRL 0xe43c
> -#define USB_BP_BA 0xfc26
> -#define USB_BP_0 0xfc28
> -#define USB_BP_1 0xfc2a
> -#define USB_BP_2 0xfc2c
> -#define USB_BP_3 0xfc2e
> -#define USB_BP_4 0xfc30
> -#define USB_BP_5 0xfc32
> -#define USB_BP_6 0xfc34
> -#define USB_BP_7 0xfc36
> -#define USB_BP_EN 0xfc38
> -#define USB_BP_8 0xfc38
> +#define USB_BP_BA PLA_BP_BA
> +#define USB_BP_0 PLA_BP_0
> +#define USB_BP_1 PLA_BP_1
> +#define USB_BP_2 PLA_BP_2
> +#define USB_BP_3 PLA_BP_3
> +#define USB_BP_4 PLA_BP_4
> +#define USB_BP_5 PLA_BP_5
> +#define USB_BP_6 PLA_BP_6
> +#define USB_BP_7 PLA_BP_7
> +#define USB_BP_EN PLA_BP_EN /* RTL8153A */
> +#define USB_BP_8 0xfc38 /* RTL8153B */
> #define USB_BP_9 0xfc3a
> #define USB_BP_10 0xfc3c
> #define USB_BP_11 0xfc3e
> @@ -346,7 +358,12 @@
> /* PLA_INDICATE_FALG */
> #define UPCOMING_RUNTIME_D3 BIT(0)
>
> +/* PLA_MACDBG_PRE and PLA_MACDBG_POST */
> +#define DEBUG_OE BIT(0)
> +#define DEBUG_LTSSM 0x0082
> +
> /* PLA_EXTRA_STATUS */
> +#define U3P3_CHECK_EN BIT(7) /* RTL_VER_05 only */
> #define LINK_CHANGE_FLAG BIT(8)
>
> /* USB_USB2PHY */
> @@ -368,6 +385,12 @@
> #define STAT_SPEED_HIGH 0x0000
> #define STAT_SPEED_FULL 0x0002
>
> +/* USB_FW_FIX_EN0 */
> +#define FW_FIX_SUSPEND BIT(14)
> +
> +/* USB_FW_FIX_EN1 */
> +#define FW_IP_RESET_EN BIT(9)
> +
> /* USB_LPM_CONFIG */
> #define LPM_U1U2_EN BIT(0)
>
> @@ -392,12 +415,24 @@
> #define OWN_UPDATE BIT(0)
> #define OWN_CLEAR BIT(1)
>
> +/* USB_FW_TASK */
> +#define FC_PATCH_TASK BIT(1)
> +
> /* USB_UPS_CTRL */
> #define POWER_CUT 0x0100
>
> /* USB_PM_CTRL_STATUS */
> #define RESUME_INDICATE 0x0001
>
> +/* USB_CSTMR */
> +#define FORCE_SUPER BIT(0)
> +
> +/* USB_FW_CTRL */
> +#define FLOW_CTRL_PATCH_OPT BIT(1)
> +
> +/* USB_FC_TIMER */
> +#define CTRL_TIMER_EN BIT(15)
> +
> /* USB_USB_CTRL */
> #define RX_AGG_DISABLE 0x0010
> #define RX_ZERO_EN 0x0080
> @@ -419,6 +454,9 @@
> #define COALESCE_HIGH 250000U
> #define COALESCE_SLOW 524280U
>
> +/* USB_WDT1_CTRL */
> +#define WTD1_EN BIT(0)
> +
> /* USB_WDT11_CTRL */
> #define TIMER11_EN 0x0001
>
> @@ -570,6 +608,8 @@ enum spd_duplex {
> #define EFUSE 0xcfdb
> #define PASS_THRU_MASK 0x1
>
> +#define BP4_SUPER_ONLY 0x1578 /* RTL_VER_04 only */
> +
> enum rtl_register_content {
> _1000bps = 0x10,
> _100bps = 0x08,
> @@ -766,6 +806,19 @@ struct r8152 {
> u32 ctap_short_off:1;
> } ups_info;
>
> +#define RTL_VER_SIZE 32
> +
> + struct rtl_fw {
> + const char *fw_name;
> + const struct firmware *fw;
> +
> + char version[RTL_VER_SIZE];
> + int (*pre_fw)(struct r8152 *tp);
> + int (*post_fw)(struct r8152 *tp);
> +
> + bool retry;
> + } rtl_fw;
> +
> atomic_t rx_count;
>
> bool eee_en;
> @@ -788,6 +841,76 @@ struct r8152 {
> u8 autoneg;
> };
>
> +/**
> + * struct fw_block - block type and total length
> + * @type: type of the current block, such as RTL_FW_END, RTL_FW_PLA,
> + * RTL_FW_USB and so on.
> + * @length: total length of the current block.
> + */
> +struct fw_block {
> + __le32 type;
> + __le32 length;
> +} __packed;
> +
> +/**
> + * struct fw_header - header of the firmware file
> + * @checksum: checksum of sha256 which is calculated from the whole file
> + * except the checksum field of the file. That is, calculate sha256
> + * from the version field to the end of the file.
> + * @version: version of this firmware.
> + * @blocks: the first firmware block of the file
> + */
> +struct fw_header {
> + u8 checksum[32];
> + char version[RTL_VER_SIZE];
> + struct fw_block blocks[0];
> +} __packed;
> +
> +/**
> + * struct fw_type_1 - a firmware block used by RTL_FW_PLA and RTL_FW_USB.
> + * The layout of the firmware block is:
> + * <struct fw_type_1> + <info> + <firmware data>.
> + * @fw_offset: offset of the firmware binary data. The start address of
> + * the data would be the address of struct fw_type_1 + @fw_offset.
> + * @fw_reg: the register to load the firmware. Depends on chip.
> + * @bp_ba_addr: the register to write break point base address. Depends on
> + * chip.
> + * @bp_ba_value: break point base address. Depends on chip.
> + * @bp_en_addr: the register to write break point enabled mask. Depends
> + * on chip.
> + * @bp_en_value: break point enabled mask. Depends on the firmware.
> + * @bp_start: the start register of break points. Depends on chip.
> + * @bp_num: the break point number which needs to be set for this firmware.
> + * Depends on the firmware.
> + * @bp: break points. Depends on firmware.
> + * @fw_ver_reg: the register to store the fw version.
> + * @fw_ver_data: the firmware version of the current type.
> + * @info: additional information for debugging, and is followed by the
> + * binary data of firmware.
> + */
> +struct fw_type_1 {
> + struct fw_block blk_hdr;
> + __le16 fw_offset;
> + __le16 fw_reg;
> + __le16 bp_ba_addr;
> + __le16 bp_ba_value;
> + __le16 bp_en_addr;
> + __le16 bp_en_value;
> + __le16 bp_start;
> + __le16 bp_num;
> + __le16 bp[16]; /* any value determined by firmware */
> + __le32 reserved;
> + __le16 fw_ver_reg;
> + u8 fw_ver_data;
> + char info[0];
> +} __packed;
> +
> +enum rtl_fw_type {
> + RTL_FW_END = 0,
> + RTL_FW_PLA,
> + RTL_FW_USB,
> +};
> +
> enum rtl_version {
> RTL_VER_UNKNOWN = 0,
> RTL_VER_01,
> @@ -3226,6 +3349,435 @@ static void rtl_reset_bmu(struct r8152 *tp)
> ocp_write_byte(tp, MCU_TYPE_USB, USB_BMU_RESET, ocp_data);
> }
>
> +/* Clear the bp to stop the firmware before loading a new one */
> +static void rtl_clear_bp(struct r8152 *tp, u16 type)
> +{
> + switch (tp->version) {
> + case RTL_VER_01:
> + case RTL_VER_02:
> + case RTL_VER_07:
> + break;
> + case RTL_VER_03:
> + case RTL_VER_04:
> + case RTL_VER_05:
> + case RTL_VER_06:
> + ocp_write_byte(tp, type, PLA_BP_EN, 0);
> + break;
> + case RTL_VER_08:
> + case RTL_VER_09:
> + default:
> + if (type == MCU_TYPE_USB) {
> + ocp_write_byte(tp, MCU_TYPE_USB, USB_BP2_EN, 0);
> +
> + ocp_write_word(tp, MCU_TYPE_USB, USB_BP_8, 0);
> + ocp_write_word(tp, MCU_TYPE_USB, USB_BP_9, 0);
> + ocp_write_word(tp, MCU_TYPE_USB, USB_BP_10, 0);
> + ocp_write_word(tp, MCU_TYPE_USB, USB_BP_11, 0);
> + ocp_write_word(tp, MCU_TYPE_USB, USB_BP_12, 0);
> + ocp_write_word(tp, MCU_TYPE_USB, USB_BP_13, 0);
> + ocp_write_word(tp, MCU_TYPE_USB, USB_BP_14, 0);
> + ocp_write_word(tp, MCU_TYPE_USB, USB_BP_15, 0);
> + } else {
> + ocp_write_byte(tp, MCU_TYPE_PLA, PLA_BP_EN, 0);
> + }
> + break;
> + }
> +
> + ocp_write_word(tp, type, PLA_BP_0, 0);
> + ocp_write_word(tp, type, PLA_BP_1, 0);
> + ocp_write_word(tp, type, PLA_BP_2, 0);
> + ocp_write_word(tp, type, PLA_BP_3, 0);
> + ocp_write_word(tp, type, PLA_BP_4, 0);
> + ocp_write_word(tp, type, PLA_BP_5, 0);
> + ocp_write_word(tp, type, PLA_BP_6, 0);
> + ocp_write_word(tp, type, PLA_BP_7, 0);
> +
> + /* wait 3 ms to make sure the firmware is stopped */
> + usleep_range(3000, 6000);
> + ocp_write_word(tp, type, PLA_BP_BA, 0);
> +}
> +
> +static bool rtl8152_is_fw_type1_ok(struct r8152 *tp, struct fw_type_1 *type1)
> +{
> + u16 fw_reg, bp_ba_addr, bp_en_addr, bp_start;
> + bool rc = false;
> + u32 length, type;
> + int i, max_bp;
> +
> + type = __le32_to_cpu(type1->blk_hdr.type);
> + if (type == RTL_FW_PLA) {
> + switch (tp->version) {
> + case RTL_VER_01:
> + case RTL_VER_02:
> + case RTL_VER_07:
> + fw_reg = 0xf800;
> + bp_ba_addr = PLA_BP_BA;
> + bp_en_addr = 0;
> + bp_start = PLA_BP_0;
> + max_bp = 8;
> + break;
> + case RTL_VER_03:
> + case RTL_VER_04:
> + case RTL_VER_05:
> + case RTL_VER_06:
> + case RTL_VER_08:
> + case RTL_VER_09:
> + fw_reg = 0xf800;
> + bp_ba_addr = PLA_BP_BA;
> + bp_en_addr = PLA_BP_EN;
> + bp_start = PLA_BP_0;
> + max_bp = 8;
> + break;
> + default:
> + goto out;
> + }
> + } else if (type == RTL_FW_USB) {
> + switch (tp->version) {
> + case RTL_VER_03:
> + case RTL_VER_04:
> + case RTL_VER_05:
> + case RTL_VER_06:
> + fw_reg = 0xf800;
> + bp_ba_addr = USB_BP_BA;
> + bp_en_addr = USB_BP_EN;
> + bp_start = USB_BP_0;
> + max_bp = 8;
> + break;
> + case RTL_VER_08:
> + case RTL_VER_09:
> + fw_reg = 0xe600;
> + bp_ba_addr = USB_BP_BA;
> + bp_en_addr = USB_BP2_EN;
> + bp_start = USB_BP_0;
> + max_bp = 16;
> + break;
> + case RTL_VER_01:
> + case RTL_VER_02:
> + case RTL_VER_07:
> + default:
> + goto out;
> + }
> + } else {
> + goto out;
> + }
> +
> + length = __le32_to_cpu(type1->blk_hdr.length);
> + if (length < __le16_to_cpu(type1->fw_offset)) {
> + dev_err(&tp->intf->dev, "invalid fw_offset\n");
> + goto out;
> + }
> +
> + length -= __le16_to_cpu(type1->fw_offset);
> + if (length < 4 || (length & 3)) {
> + dev_err(&tp->intf->dev, "invalid block length\n");
> + goto out;
> + }
> +
> + if (__le16_to_cpu(type1->fw_reg) != fw_reg) {
> + dev_err(&tp->intf->dev, "invalid register to load firmware\n");
> + goto out;
> + }
> +
> + if (__le16_to_cpu(type1->bp_ba_addr) != bp_ba_addr) {
> + dev_err(&tp->intf->dev, "invalid base address register\n");
> + goto out;
> + }
> +
> + if (__le16_to_cpu(type1->bp_en_addr) != bp_en_addr) {
> + dev_err(&tp->intf->dev, "invalid enabled mask register\n");
> + goto out;
> + }
> +
> + if (__le16_to_cpu(type1->bp_start) != bp_start) {
> + dev_err(&tp->intf->dev,
> + "invalid start register of break point\n");
> + goto out;
> + }
> +
> + if (__le16_to_cpu(type1->bp_num) > max_bp) {
> + dev_err(&tp->intf->dev, "invalid break point number\n");
> + goto out;
> + }
> +
> + for (i = __le16_to_cpu(type1->bp_num); i < max_bp; i++) {
> + if (type1->bp[i]) {
> + dev_err(&tp->intf->dev, "unused bp%u is not zero\n", i);
> + goto out;
> + }
> + }
> +
> + rc = true;
> +out:
> + return rc;
> +}
> +
> +/* Verify the checksum for the firmware file. It is calculated from the version
> + * field to the end of the file. Compare the result with the checksum field to
> + * make sure the file is correct.
> + */
> +static long rtl8152_fw_verify_checksum(struct r8152 *tp,
> + struct fw_header *fw_hdr, size_t size)
> +{
> + unsigned char checksum[sizeof(fw_hdr->checksum)];
> + struct crypto_shash *alg;
> + struct shash_desc *sdesc;
> + size_t len;
> + long rc;
> +
> + alg = crypto_alloc_shash("sha256", 0, 0);
> + if (IS_ERR(alg)) {
> + rc = PTR_ERR(alg);
> + goto out;
> + }
> +
> + if (crypto_shash_digestsize(alg) != sizeof(fw_hdr->checksum)) {
> + rc = -EFAULT;
> + dev_err(&tp->intf->dev, "digestsize incorrect (%u)\n",
> + crypto_shash_digestsize(alg));
> + goto free_shash;
> + }
> +
> + len = sizeof(*sdesc) + crypto_shash_descsize(alg);
> + sdesc = kmalloc(len, GFP_KERNEL);
> + if (!sdesc) {
> + rc = -ENOMEM;
> + goto free_shash;
> + }
> + sdesc->tfm = alg;
> +
> + len = size - sizeof(fw_hdr->checksum);
> + rc = crypto_shash_digest(sdesc, fw_hdr->version, len, checksum);
> + kfree(sdesc);
> + if (rc)
> + goto free_shash;
> +
> + if (memcmp(fw_hdr->checksum, checksum, sizeof(fw_hdr->checksum))) {
> + dev_err(&tp->intf->dev, "checksum fail\n");
> + rc = -EFAULT;
> + }
> +
> +free_shash:
> + crypto_free_shash(alg);
> +out:
> + return rc;
> +}
> +
> +static long rtl8152_check_firmware(struct r8152 *tp, struct rtl_fw *rtl_fw)
> +{
> + const struct firmware *fw = rtl_fw->fw;
> + struct fw_header *fw_hdr = (struct fw_header *)fw->data;
> + struct fw_type_1 *pla = NULL, *usb = NULL;
> + long ret = -EFAULT;
> + int i;
> +
> + if (fw->size < sizeof(*fw_hdr)) {
> + dev_err(&tp->intf->dev, "file too small\n");
> + goto fail;
> + }
> +
> + ret = rtl8152_fw_verify_checksum(tp, fw_hdr, fw->size);
> + if (ret)
> + goto fail;
> +
> + ret = -EFAULT;
> +
> + for (i = sizeof(*fw_hdr); i < fw->size;) {
> + struct fw_block *block = (struct fw_block *)&fw->data[i];
> + u32 type;
> +
> + if ((i + sizeof(*block)) > fw->size)
> + goto fail;
> +
> + type = __le32_to_cpu(block->type);
> + switch (type) {
> + case RTL_FW_END:
> + if (__le32_to_cpu(block->length) != sizeof(*block))
> + goto fail;
> + goto success;
> + case RTL_FW_PLA:
> + if (pla) {
> + dev_err(&tp->intf->dev,
> + "multiple PLA firmware encountered");
> + goto fail;
> + }
> +
> + pla = (struct fw_type_1 *)block;
> + if (!rtl8152_is_fw_type1_ok(tp, pla)) {
> + dev_err(&tp->intf->dev,
> + "load PLA firmware failed\n");
> + goto fail;
> + }
> + break;
> + case RTL_FW_USB:
> + if (usb) {
> + dev_err(&tp->intf->dev,
> + "multiple USB firmware encountered");
> + goto fail;
> + }
> +
> + usb = (struct fw_type_1 *)block;
> + if (!rtl8152_is_fw_type1_ok(tp, usb)) {
> + dev_err(&tp->intf->dev,
> + "load USB firmware failed\n");
> + goto fail;
> + }
> + break;
> + default:
> + dev_warn(&tp->intf->dev, "Unknown type %u is found\n",
> + type);
> + break;
> + }
> +
> + /* next block */
> + i += ALIGN(__le32_to_cpu(block->length), 8);
> + }
> +
> +success:
> + return 0;
> +fail:
> + return ret;
> +}
> +
> +static void rtl8152_fw_type_1_apply(struct r8152 *tp, struct fw_type_1 *type1)
> +{
> + u16 bp_en_addr, bp_index, type, bp_num, fw_ver_reg;
> + u32 length;
> + u8 *data;
> + int i;
> +
> + switch (__le32_to_cpu(type1->blk_hdr.type)) {
> + case RTL_FW_PLA:
> + type = MCU_TYPE_PLA;
> + break;
> + case RTL_FW_USB:
> + type = MCU_TYPE_USB;
> + break;
> + default:
> + return;
> + }
> +
> + rtl_clear_bp(tp, type);
> +
> + /* Enable backup/restore of MACDBG. This is required after clearing PLA
> + * break points and before applying the PLA firmware.
> + */
> + if (tp->version == RTL_VER_04 && type == MCU_TYPE_PLA &&
> + !(ocp_read_word(tp, MCU_TYPE_PLA, PLA_MACDBG_POST) & DEBUG_OE)) {
> + ocp_write_word(tp, MCU_TYPE_PLA, PLA_MACDBG_PRE, DEBUG_LTSSM);
> + ocp_write_word(tp, MCU_TYPE_PLA, PLA_MACDBG_POST, DEBUG_LTSSM);
> + }
> +
> + length = __le32_to_cpu(type1->blk_hdr.length);
> + length -= __le16_to_cpu(type1->fw_offset);
> +
> + data = (u8 *)type1;
> + data += __le16_to_cpu(type1->fw_offset);
> +
> + generic_ocp_write(tp, __le16_to_cpu(type1->fw_reg), 0xff, length, data,
> + type);
> +
> + ocp_write_word(tp, type, __le16_to_cpu(type1->bp_ba_addr),
> + __le16_to_cpu(type1->bp_ba_value));
> +
> + bp_index = __le16_to_cpu(type1->bp_start);
> + bp_num = __le16_to_cpu(type1->bp_num);
> + for (i = 0; i < bp_num; i++) {
> + ocp_write_word(tp, type, bp_index, __le16_to_cpu(type1->bp[i]));
> + bp_index += 2;
> + }
> +
> + bp_en_addr = __le16_to_cpu(type1->bp_en_addr);
> + if (bp_en_addr)
> + ocp_write_word(tp, type, bp_en_addr,
> + __le16_to_cpu(type1->bp_en_value));
> +
> + fw_ver_reg = __le16_to_cpu(type1->fw_ver_reg);
> + if (fw_ver_reg)
> + ocp_write_byte(tp, MCU_TYPE_USB, fw_ver_reg,
> + type1->fw_ver_data);
> +
> + dev_dbg(&tp->intf->dev, "successfully applied %s\n", type1->info);
> +}
> +
> +static void rtl8152_apply_firmware(struct r8152 *tp)
> +{
> + struct rtl_fw *rtl_fw = &tp->rtl_fw;
> + const struct firmware *fw = rtl_fw->fw;
> + struct fw_header *fw_hdr = (struct fw_header *)fw->data;
> + int i;
> +
> + if (IS_ERR_OR_NULL(rtl_fw->fw))
> + return;
> +
> + if (rtl_fw->pre_fw)
> + rtl_fw->pre_fw(tp);
> +
> + for (i = offsetof(struct fw_header, blocks); i < fw->size;) {
> + struct fw_block *block = (struct fw_block *)&fw->data[i];
> +
> + switch (__le32_to_cpu(block->type)) {
> + case RTL_FW_END:
> + goto post_fw;
> + case RTL_FW_PLA:
> + case RTL_FW_USB:
> + rtl8152_fw_type_1_apply(tp, (struct fw_type_1 *)block);
> + break;
> + default:
> + break;
> + }
> +
> + i += ALIGN(__le32_to_cpu(block->length), 8);
> + }
> +
> +post_fw:
> + if (rtl_fw->post_fw)
> + rtl_fw->post_fw(tp);
> +
> + strscpy(rtl_fw->version, fw_hdr->version, RTL_VER_SIZE);
> + dev_info(&tp->intf->dev, "load %s successfully\n", rtl_fw->version);
> +}
> +
> +static void rtl8152_release_firmware(struct r8152 *tp)
> +{
> + struct rtl_fw *rtl_fw = &tp->rtl_fw;
> +
> + if (!IS_ERR_OR_NULL(rtl_fw->fw)) {
> + release_firmware(rtl_fw->fw);
> + rtl_fw->fw = NULL;
> + }
> +}
> +
> +static int rtl8152_request_firmware(struct r8152 *tp)
> +{
> + struct rtl_fw *rtl_fw = &tp->rtl_fw;
> + long rc;
> +
> + if (rtl_fw->fw || !rtl_fw->fw_name) {
> + dev_info(&tp->intf->dev, "skip request firmware\n");
> + rc = 0;
> + goto result;
> + }
> +
> + rc = request_firmware(&rtl_fw->fw, rtl_fw->fw_name, &tp->intf->dev);
> + if (rc < 0)
> + goto result;
> +
> + rc = rtl8152_check_firmware(tp, rtl_fw);
> + if (rc < 0)
> + release_firmware(rtl_fw->fw);
> +
> +result:
> + if (rc) {
> + rtl_fw->fw = ERR_PTR(rc);
> +
> + dev_warn(&tp->intf->dev,
> + "unable to load firmware patch %s (%ld)\n",
> + rtl_fw->fw_name, rc);
> + }
> +
> + return rc;
> +}
> +
> static void r8152_aldps_en(struct r8152 *tp, bool enable)
> {
> if (enable) {
> @@ -3370,6 +3922,7 @@ static void rtl8152_disable(struct r8152 *tp)
>
> static void r8152b_hw_phy_cfg(struct r8152 *tp)
> {
> + rtl8152_apply_firmware(tp);
> rtl_eee_enable(tp, tp->eee_en);
> r8152_aldps_en(tp, true);
> r8152b_enable_fc(tp);
> @@ -3524,6 +4077,126 @@ static int r8153_patch_request(struct r8152 *tp, bool request)
> }
> }
>
> +static int r8153_pre_firmware_1(struct r8152 *tp)
> +{
> + int i;
> +
> + /* Wait till the WTD timer is ready. It would take at most 104 ms. */
> + for (i = 0; i < 104; i++) {
> + u32 ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_WDT1_CTRL);
> +
> + if (!(ocp_data & WTD1_EN))
> + break;
> + usleep_range(1000, 2000);
> + }
> +
> + return 0;
> +}
> +
> +static int r8153_post_firmware_1(struct r8152 *tp)
> +{
> + /* set USB_BP_4 to support USB_SPEED_SUPER only */
> + if (ocp_read_byte(tp, MCU_TYPE_USB, USB_CSTMR) & FORCE_SUPER)
> + ocp_write_word(tp, MCU_TYPE_USB, USB_BP_4, BP4_SUPER_ONLY);
> +
> + /* reset UPHY timer to 36 ms */
> + ocp_write_word(tp, MCU_TYPE_PLA, PLA_UPHY_TIMER, 36000 / 16);
> +
> + return 0;
> +}
> +
> +static int r8153_pre_firmware_2(struct r8152 *tp)
> +{
> + u32 ocp_data;
> +
> + r8153_pre_firmware_1(tp);
> +
> + ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_FIX_EN0);
> + ocp_data &= ~FW_FIX_SUSPEND;
> + ocp_write_word(tp, MCU_TYPE_USB, USB_FW_FIX_EN0, ocp_data);
> +
> + return 0;
> +}
> +
> +static int r8153_post_firmware_2(struct r8152 *tp)
> +{
> + u32 ocp_data;
> +
> + /* enable bp0 if support USB_SPEED_SUPER only */
> + if (ocp_read_byte(tp, MCU_TYPE_USB, USB_CSTMR) & FORCE_SUPER) {
> + ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_BP_EN);
> + ocp_data |= BIT(0);
> + ocp_write_word(tp, MCU_TYPE_PLA, PLA_BP_EN, ocp_data);
> + }
> +
> + /* reset UPHY timer to 36 ms */
> + ocp_write_word(tp, MCU_TYPE_PLA, PLA_UPHY_TIMER, 36000 / 16);
> +
> + /* enable U3P3 check, set the counter to 4 */
> + ocp_write_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS, U3P3_CHECK_EN | 4);
> +
> + ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_FIX_EN0);
> + ocp_data |= FW_FIX_SUSPEND;
> + ocp_write_word(tp, MCU_TYPE_USB, USB_FW_FIX_EN0, ocp_data);
> +
> + ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_USB2PHY);
> + ocp_data |= USB2PHY_L1 | USB2PHY_SUSPEND;
> + ocp_write_byte(tp, MCU_TYPE_USB, USB_USB2PHY, ocp_data);
> +
> + return 0;
> +}
> +
> +static int r8153_post_firmware_3(struct r8152 *tp)
> +{
> + u32 ocp_data;
> +
> + ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_USB2PHY);
> + ocp_data |= USB2PHY_L1 | USB2PHY_SUSPEND;
> + ocp_write_byte(tp, MCU_TYPE_USB, USB_USB2PHY, ocp_data);
> +
> + ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_FIX_EN1);
> + ocp_data |= FW_IP_RESET_EN;
> + ocp_write_word(tp, MCU_TYPE_USB, USB_FW_FIX_EN1, ocp_data);
> +
> + return 0;
> +}
> +
> +static int r8153b_pre_firmware_1(struct r8152 *tp)
> +{
> + /* enable fc timer and set timer to 1 second. */
> + ocp_write_word(tp, MCU_TYPE_USB, USB_FC_TIMER,
> + CTRL_TIMER_EN | (1000 / 8));
> +
> + return 0;
> +}
> +
> +static int r8153b_post_firmware_1(struct r8152 *tp)
> +{
> + u32 ocp_data;
> +
> + /* enable bp0 for RTL8153-BND */
> + ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_MISC_1);
> + if (ocp_data & BND_MASK) {
> + ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_BP_EN);
> + ocp_data |= BIT(0);
> + ocp_write_word(tp, MCU_TYPE_PLA, PLA_BP_EN, ocp_data);
> + }
> +
> + ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_CTRL);
> + ocp_data |= FLOW_CTRL_PATCH_OPT;
> + ocp_write_word(tp, MCU_TYPE_USB, USB_FW_CTRL, ocp_data);
> +
> + ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_TASK);
> + ocp_data |= FC_PATCH_TASK;
> + ocp_write_word(tp, MCU_TYPE_USB, USB_FW_TASK, ocp_data);
> +
> + ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_FIX_EN1);
> + ocp_data |= FW_IP_RESET_EN;
> + ocp_write_word(tp, MCU_TYPE_USB, USB_FW_FIX_EN1, ocp_data);
> +
> + return 0;
> +}
> +
> static void r8153_aldps_en(struct r8152 *tp, bool enable)
> {
> u16 data;
> @@ -3558,6 +4231,8 @@ static void r8153_hw_phy_cfg(struct r8152 *tp)
> /* disable EEE before updating the PHY parameters */
> rtl_eee_enable(tp, false);
>
> + rtl8152_apply_firmware(tp);
> +
> if (tp->version == RTL_VER_03) {
> data = ocp_reg_read(tp, OCP_EEE_CFG);
> data &= ~CTAP_SHORT_EN;
> @@ -3630,6 +4305,8 @@ static void r8153b_hw_phy_cfg(struct r8152 *tp)
> /* disable EEE before updating the PHY parameters */
> rtl_eee_enable(tp, false);
>
> + rtl8152_apply_firmware(tp);
> +
> r8153b_green_en(tp, test_bit(GREEN_ETHERNET, &tp->flags));
>
> data = sram_read(tp, SRAM_GREEN_CFG);
> @@ -4156,11 +4833,22 @@ static void rtl_hw_phy_work_func_t(struct work_struct *work)
>
> mutex_lock(&tp->control);
>
> + if (rtl8152_request_firmware(tp) == -ENODEV && tp->rtl_fw.retry) {
> + tp->rtl_fw.retry = false;
> + tp->rtl_fw.fw = NULL;
> +
> + /* Delay execution in case request_firmware() is not ready yet.
> + */
> + queue_delayed_work(system_long_wq, &tp->hw_phy_work, HZ * 10);
> + goto ignore_once;
> + }
> +
> tp->rtl_ops.hw_phy_cfg(tp);
>
> rtl8152_set_speed(tp, tp->autoneg, tp->speed, tp->duplex,
> tp->advertising);
>
> +ignore_once:
> mutex_unlock(&tp->control);
>
> usb_autopm_put_interface(tp->intf);
> @@ -4198,6 +4886,11 @@ static int rtl8152_open(struct net_device *netdev)
> struct r8152 *tp = netdev_priv(netdev);
> int res = 0;
>
> + if (work_busy(&tp->hw_phy_work.work) & WORK_BUSY_PENDING) {
> + cancel_delayed_work_sync(&tp->hw_phy_work);
> + rtl_hw_phy_work_func_t(&tp->hw_phy_work.work);
> + }
> +
> res = alloc_all_mem(tp);
> if (res)
> goto out;
> @@ -4844,6 +5537,9 @@ static void rtl8152_get_drvinfo(struct net_device *netdev,
> strlcpy(info->driver, MODULENAME, sizeof(info->driver));
> strlcpy(info->version, DRIVER_VERSION, sizeof(info->version));
> usb_make_path(tp->udev, info->bus_info, sizeof(info->bus_info));
> + if (!IS_ERR_OR_NULL(tp->rtl_fw.fw))
> + strlcpy(info->fw_version, tp->rtl_fw.version,
> + sizeof(info->fw_version));
> }
>
> static
> @@ -5468,6 +6164,47 @@ static int rtl_ops_init(struct r8152 *tp)
> return ret;
> }
>
> +#define FIRMWARE_8153A_2 "rtl_nic/rtl8153a-2.fw"
> +#define FIRMWARE_8153A_3 "rtl_nic/rtl8153a-3.fw"
> +#define FIRMWARE_8153A_4 "rtl_nic/rtl8153a-4.fw"
> +#define FIRMWARE_8153B_2 "rtl_nic/rtl8153b-2.fw"
> +
> +MODULE_FIRMWARE(FIRMWARE_8153A_2);
> +MODULE_FIRMWARE(FIRMWARE_8153A_3);
> +MODULE_FIRMWARE(FIRMWARE_8153A_4);
> +MODULE_FIRMWARE(FIRMWARE_8153B_2);
> +
> +static int rtl_fw_init(struct r8152 *tp)
> +{
> + struct rtl_fw *rtl_fw = &tp->rtl_fw;
> +
> + switch (tp->version) {
> + case RTL_VER_04:
> + rtl_fw->fw_name = FIRMWARE_8153A_2;
> + rtl_fw->pre_fw = r8153_pre_firmware_1;
> + rtl_fw->post_fw = r8153_post_firmware_1;
> + break;
> + case RTL_VER_05:
> + rtl_fw->fw_name = FIRMWARE_8153A_3;
> + rtl_fw->pre_fw = r8153_pre_firmware_2;
> + rtl_fw->post_fw = r8153_post_firmware_2;
> + break;
> + case RTL_VER_06:
> + rtl_fw->fw_name = FIRMWARE_8153A_4;
> + rtl_fw->post_fw = r8153_post_firmware_3;
> + break;
> + case RTL_VER_09:
> + rtl_fw->fw_name = FIRMWARE_8153B_2;
> + rtl_fw->pre_fw = r8153b_pre_firmware_1;
> + rtl_fw->post_fw = r8153b_post_firmware_1;
> + break;
> + default:
> + break;
> + }
> +
> + return 0;
> +}
> +
> static u8 rtl_get_version(struct usb_interface *intf)
> {
> struct usb_device *udev = interface_to_usbdev(intf);
> @@ -5575,6 +6312,8 @@ static int rtl8152_probe(struct usb_interface *intf,
> if (ret)
> goto out;
>
> + rtl_fw_init(tp);
> +
> mutex_init(&tp->control);
> INIT_DELAYED_WORK(&tp->schedule, rtl_work_func_t);
> INIT_DELAYED_WORK(&tp->hw_phy_work, rtl_hw_phy_work_func_t);
> @@ -5646,6 +6385,10 @@ static int rtl8152_probe(struct usb_interface *intf,
> intf->needs_remote_wakeup = 1;
>
> tp->rtl_ops.init(tp);
> +#if IS_BUILTIN(CONFIG_USB_RTL8152)
> + /* Retry in case request_firmware() is not ready yet. */
> + tp->rtl_fw.retry = true;
> +#endif
> queue_delayed_work(system_long_wq, &tp->hw_phy_work, 0);
> set_ethernet_addr(tp);
>
> @@ -5691,6 +6434,7 @@ static void rtl8152_disconnect(struct usb_interface *intf)
> tasklet_kill(&tp->tx_tl);
> cancel_delayed_work_sync(&tp->hw_phy_work);
> tp->rtl_ops.unload(tp);
> + rtl8152_release_firmware(tp);
> free_netdev(tp->netdev);
> }
> }
Best regards
--
Marek Szyprowski, PhD
Samsung R&D Institute Poland
