Hi Daniel,
On 18.10.2019 23:24, Daniel Lezcano wrote:
> Hi Claudiu,
>
> On 15/10/2019 11:23, Claudiu.Beznea@xxxxxxxxxxxxx wrote:
>
> [ ... ]
>
>> The timer clock source could be divided by MR.PRES + 1.
>>
>> So, I used the clock-frequency DT binding to let user choose the timer's
>> frequency. Based on the value provided via this DT binding the best clock
>> source and prescaler is chosen via mchp_pit64b_pres_prepare() function.
>
> I'm willing to take the driver but I doubt the purpose of the
> clock-frequency is to let the user choose the frequency.
>
I found this approach in the following already integrated drivers:
drivers/clocksource/armv7m_systick.c
drivers/clocksource/bcm2835_timer.c
drivers/clocksource/bcm_kona_timer.c
drivers/clocksource/mips-gic-timer.c
drivers/clocksource/mps2-timer.c
drivers/clocksource/timer-qcom.c
drivers/clocksource/arm_arch_timer.c
Looking through the documentation of these, most of them document this DT
property as the frequency of the clock that drivers the timer, but none of
them seems to have some IP internal dividers so that the timer to tick at
different frequency than the clock that feeds the IP. From the
documentation of the above drivers;
drivers/clocksource/armv7m_systick.c
- clock-frequency : The rate in HZ in input of the ARM SysTick
drivers/clocksource/bcm2835_timer.c
- clock-frequency : The frequency of the clock that drives the counter, in
Hz.
drivers/clocksource/bcm_kona_timer.c
- clock-frequency: frequency that the clock operates
drivers/clocksource/mips-gic-timer.c
clock-frequency : Clock frequency at which the GIC timers operate.
drivers/clocksource/mps2-timer.c
- clock-frequency : The rate in HZ in input of the ARM MPS2 timer
drivers/clocksource/timer-qcom.c
- clock-frequency : The frequency of the debug timer and the general
purpose
timer(s) in Hz in that order.
This is why I also chose this DT bindings.
If you want I can stick to a fixed frequency hard coded in the driver.
Please let me know if this would be OK for you.
Thank you,
Claudiu Beznea
>
> [ ... ]
>
>
