Commit 4294a779bd8d ("PM / devfreq: exynos-bus: Convert to use
dev_pm_opp_set_rate()") introduced errors:
exynos-bus: new bus device registered: soc:bus_wcore ( 84000 KHz ~ 400000 KHz)
exynos-bus: new bus device registered: soc:bus_noc ( 67000 KHz ~ 100000 KHz)
exynos-bus: new bus device registered: soc:bus_fsys_apb (100000 KHz ~ 200000 KHz)
...
exynos-bus soc:bus_wcore: dev_pm_opp_set_rate: failed to find current OPP for freq 532000000 (-34)
exynos-bus soc:bus_noc: dev_pm_opp_set_rate: failed to find current OPP for freq 111000000 (-34)
exynos-bus soc:bus_fsys_apb: dev_pm_opp_set_rate: failed to find current OPP for freq 222000000 (-34)
They are caused by incorrect PLL assigned to clock source, which results
in clock rate outside of OPP range. Add workaround for this in
exynos_bus_parse_of() by adjusting clock rate to those present in OPP.
Fixes: 4294a779bd8d ("PM / devfreq: exynos-bus: Convert to use dev_pm_opp_set_rate()")
Reported-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
Signed-off-by: Kamil Konieczny <k.konieczny@xxxxxxxxxxxxxxxxxxx>
---
drivers/devfreq/exynos-bus.c | 14 +++++++++++---
1 file changed, 11 insertions(+), 3 deletions(-)
diff --git a/drivers/devfreq/exynos-bus.c b/drivers/devfreq/exynos-bus.c
index c832673273a2..37bd34d5625b 100644
--- a/drivers/devfreq/exynos-bus.c
+++ b/drivers/devfreq/exynos-bus.c
@@ -243,7 +243,7 @@ static int exynos_bus_parse_of(struct device_node *np,
{
struct device *dev = bus->dev;
struct dev_pm_opp *opp;
- unsigned long rate;
+ unsigned long rate, opp_rate;
int ret;
/* Get the clock to provide each bus with source clock */
@@ -267,13 +267,21 @@ static int exynos_bus_parse_of(struct device_node *np,
}
rate = clk_get_rate(bus->clk);
-
- opp = devfreq_recommended_opp(dev, &rate, 0);
+ opp_rate = rate;
+ opp = devfreq_recommended_opp(dev, &opp_rate, 0);
if (IS_ERR(opp)) {
dev_err(dev, "failed to find dev_pm_opp\n");
ret = PTR_ERR(opp);
goto err_opp;
}
+ /*
+ * FIXME: U-boot leaves clock source at incorrect PLL, this results
+ * in clock rate outside defined OPP rate. Work around this bug by
+ * setting clock rate to recommended one.
+ */
+ if (rate > opp_rate)
+ clk_set_rate(bus->clk, opp_rate);
+
bus->curr_freq = dev_pm_opp_get_freq(opp);
dev_pm_opp_put(opp);
--
2.23.0
