Re: [PATCH v4 1/8] dt-bindings: timer: Convert Exynos MCT bindings to json-schema

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Sep 25, 2019 at 03:40:52PM +0200, Marek Szyprowski wrote:
> Hi Krzysztof,
> 
> On 23.09.2019 18:14, Krzysztof Kozlowski wrote:
> > Convert Samsung Exynos Soc Multi Core Timer bindings to DT schema format
> > using json-schema.
> >
> > Signed-off-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
> >
> > ---
> >
> > Changes since v3:
> > 1. Use interrupts-extended instead of interrupts-map.
> >
> > Changes since v1:
> > 1. Indent example with four spaces (more readable),
> > 2. Rename nodes in example to timer,
> > 3. Remove mct-map subnode.
> > ---
> >   .../bindings/timer/samsung,exynos4210-mct.txt |  88 ------------
> >   .../timer/samsung,exynos4210-mct.yaml         | 125 ++++++++++++++++++
> >   2 files changed, 125 insertions(+), 88 deletions(-)
> >   delete mode 100644 Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.txt
> >   create mode 100644 Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.txt b/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.txt
> > deleted file mode 100644
> > index 8f78640ad64c..000000000000
> > --- a/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.txt
> > +++ /dev/null
> > @@ -1,88 +0,0 @@
> > -Samsung's Multi Core Timer (MCT)
> > -
> > -The Samsung's Multi Core Timer (MCT) module includes two main blocks, the
> > -global timer and CPU local timers. The global timer is a 64-bit free running
> > -up-counter and can generate 4 interrupts when the counter reaches one of the
> > -four preset counter values. The CPU local timers are 32-bit free running
> > -down-counters and generate an interrupt when the counter expires. There is
> > -one CPU local timer instantiated in MCT for every CPU in the system.
> > -
> > -Required properties:
> > -
> > -- compatible: should be "samsung,exynos4210-mct".
> > -  (a) "samsung,exynos4210-mct", for mct compatible with Exynos4210 mct.
> > -  (b) "samsung,exynos4412-mct", for mct compatible with Exynos4412 mct.
> > -
> > -- reg: base address of the mct controller and length of the address space
> > -  it occupies.
> > -
> > -- interrupts: the list of interrupts generated by the controller. The following
> > -  should be the order of the interrupts specified. The local timer interrupts
> > -  should be specified after the four global timer interrupts have been
> > -  specified.
> > -
> > -	0: Global Timer Interrupt 0
> > -	1: Global Timer Interrupt 1
> > -	2: Global Timer Interrupt 2
> > -	3: Global Timer Interrupt 3
> > -	4: Local Timer Interrupt 0
> > -	5: Local Timer Interrupt 1
> > -	6: ..
> > -	7: ..
> > -	i: Local Timer Interrupt n
> > -
> > -  For MCT block that uses a per-processor interrupt for local timers, such
> > -  as ones compatible with "samsung,exynos4412-mct", only one local timer
> > -  interrupt might be specified, meaning that all local timers use the same
> > -  per processor interrupt.
> > -
> > -Example 1: In this example, the IP contains two local timers, using separate
> > -	   interrupts, so two local timer interrupts have been specified,
> > -	   in addition to four global timer interrupts.
> > -
> > -	mct@10050000 {
> > -		compatible = "samsung,exynos4210-mct";
> > -		reg = <0x10050000 0x800>;
> > -		interrupts = <0 57 0>, <0 69 0>, <0 70 0>, <0 71 0>,
> > -			     <0 42 0>, <0 48 0>;
> > -	};
> > -
> > -Example 2: In this example, the timer interrupts are connected to two separate
> > -	   interrupt controllers. Hence, an interrupt-map is created to map
> > -	   the interrupts to the respective interrupt controllers.
> > -
> > -	mct@101c0000 {
> > -		compatible = "samsung,exynos4210-mct";
> > -		reg = <0x101C0000 0x800>;
> > -		interrupt-parent = <&mct_map>;
> > -		interrupts = <0>, <1>, <2>, <3>, <4>, <5>;
> > -
> > -		mct_map: mct-map {
> > -			#interrupt-cells = <1>;
> > -			#address-cells = <0>;
> > -			#size-cells = <0>;
> > -			interrupt-map = <0 &gic 0 57 0>,
> > -					<1 &gic 0 69 0>,
> > -					<2 &combiner 12 6>,
> > -					<3 &combiner 12 7>,
> > -					<4 &gic 0 42 0>,
> > -					<5 &gic 0 48 0>;
> > -		};
> > -	};
> > -
> > -Example 3: In this example, the IP contains four local timers, but using
> > -	   a per-processor interrupt to handle them. Either all the local
> > -	   timer interrupts can be specified, with the same interrupt specifier
> > -	   value or just the first one.
> > -
> > -	mct@10050000 {
> > -		compatible = "samsung,exynos4412-mct";
> > -		reg = <0x10050000 0x800>;
> > -
> > -		/* Both ways are possible in this case. Either: */
> > -		interrupts = <0 57 0>, <0 69 0>, <0 70 0>, <0 71 0>,
> > -			     <0 42 0>;
> > -		/* or: */
> > -		interrupts = <0 57 0>, <0 69 0>, <0 70 0>, <0 71 0>,
> > -			     <0 42 0>, <0 42 0>, <0 42 0>, <0 42 0>;
> > -	};
> > diff --git a/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml b/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml
> > new file mode 100644
> > index 000000000000..bff3f54a398f
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml
> > @@ -0,0 +1,125 @@
> > +# SPDX-License-Identifier: GPL-2.0
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/timer/samsung,exynos4210-mct.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Samsung Exynos SoC Multi Core Timer (MCT)
> > +
> > +maintainers:
> > +  - Krzysztof Kozlowski <krzk@xxxxxxxxxx>
> > +
> > +description: |+
> > +  The Samsung's Multi Core Timer (MCT) module includes two main blocks, the
> > +  global timer and CPU local timers. The global timer is a 64-bit free running
> > +  up-counter and can generate 4 interrupts when the counter reaches one of the
> > +  four preset counter values. The CPU local timers are 32-bit free running
> > +  down-counters and generate an interrupt when the counter expires. There is
> > +  one CPU local timer instantiated in MCT for every CPU in the system.
> > +
> > +properties:
> > +  compatible:
> > +    enum:
> > +      - samsung,exynos4210-mct
> > +      - samsung,exynos4412-mct
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  interrupts:
> > +    description: |
> > +      Interrupts should be put in specific order. This is, the local timer
> > +      interrupts should be specified after the four global timer interrupts
> > +      have been specified:
> > +      0: Global Timer Interrupt 0
> > +      1: Global Timer Interrupt 1
> > +      2: Global Timer Interrupt 2
> > +      3: Global Timer Interrupt 3
> > +      4: Local Timer Interrupt 0
> > +      5: Local Timer Interrupt 1
> > +      6: ..
> > +      7: ..
> > +      i: Local Timer Interrupt n
> > +      For MCT block that uses a per-processor interrupt for local timers, such
> > +      as ones compatible with "samsung,exynos4412-mct", only one local timer
> > +      interrupt might be specified, meaning that all local timers use the same
> > +      per processor interrupt.
> > +    minItems: 5               # 4 Global + 1 local
> > +    maxItems: 20              # 4 Global + 16 local
> > +
> > +  interrupts-extended:
> > +    description: |
> > +      If interrupts are coming from different controllers, this property
> > +      can be used instead of regular "interrupts" property.
> > +      The format is exactly the same as with "interrupts".
> > +      Interrupts should be put in specific order. This is, the local timer
> > +    minItems: 5               # 4 Global + 1 local
> > +    maxItems: 20              # 4 Global + 16 local
> > +
> > +required:
> > +  - compatible
> > +  - interrupts
> > +  - reg
> > +
> > +allOf:
> > +  - if:
> > +      not:
> > +        required:
> > +          - interrupts
> > +    then:
> > +      required:
> > +        - interrupts-extended
> > +
> > +examples:
> > +  - |
> > +    // In this example, the IP contains two local timers, using separate
> > +    // interrupts, so two local timer interrupts have been specified,
> > +    // in addition to four global timer interrupts.
> > +
> > +    timer@10050000 {
> > +        compatible = "samsung,exynos4210-mct";
> > +        reg = <0x10050000 0x800>;
> > +        interrupts = <0 57 0>, <0 69 0>, <0 70 0>, <0 71 0>,
> > +                     <0 42 0>, <0 48 0>;
> > +    };
> > +
> > +  - |
> > +    // In this example, the timer interrupts are connected to two separate
> > +    // interrupt controllers. Hence, an interrupts-extended is needed.
> > +
> > +    timer@101c0000 {
> > +        compatible = "samsung,exynos4210-mct";
> > +        reg = <0x101C0000 0x800>;
> > +        interrupts-extended = <&gic 0 57 0>,
> > +                              <&gic 0 69 0>,
> > +                              <&combiner 12 6>,
> > +                              <&combiner 12 7>,
> > +                              <&gic 0 42 0>,
> > +                              <&gic 0 48 0>;
> > +    };
> > +
> > +  - |
> > +    // In this example, the IP contains four local timers, but using
> > +    // a per-processor interrupt to handle them. Only one first local
> > +    // interrupt is specified.
> > +
> > +    timer@10050000 {
> > +        compatible = "samsung,exynos4412-mct";
> > +        reg = <0x10050000 0x800>;
> > +
> > +        interrupts = <0 57 0>, <0 69 0>, <0 70 0>, <0 71 0>,
> > +                     <0 42 0>;
> > +    };
> > +
> > +  - |
> > +    // In this example, the IP contains four local timers, but using
> > +    // a per-processor interrupt to handle them. All the local timer
> > +    // interrupts are specified.
> > +
> > +    timer@10050000 {
> > +        compatible = "samsung,exynos4412-mct";
> > +        reg = <0x10050000 0x800>;
> > +
> > +        interrupts = <0 57 0>, <0 69 0>, <0 70 0>, <0 71 0>,
> > +                     <0 42 0>, <0 42 0>, <0 42 0>, <0 42 0>;
> > +    };
> I would add "#include <dt-bindings/interrupt-controller/arm-gic.h>" and
> replace zeros with proper defines like GIC_SPI and GIC_PPI. The last two
> examples describes per-processor-interrupts, but have 0 in the specifier
> cell 0. I would also use proper IRQ_TYPE_LEVEL_HIGH at cell 3 instead
> of 0. I would also consider adding artificial 'interrupt-parent = &git'
> property to the 1st, 3rd and 4th examples to make it clear that they
> refer to ARM GIC bindings.

Makes sense, but how about doing this in separate patch? The example code
was like this amd this just converts the bindings so I think it is better
to reduce the amount of feature-like improvements.

Best regards,
Krzysztof




[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux for Synopsys ARC Processors]    
  • [Linux on Unisoc (RDA Micro) SoCs]     [Linux Actions SoC]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  •   Powered by Linux