Add description of Dynamic Memory Controller and PPMU counters.
They are used by exynos5422-dmc driver.
There is a definition of the memory chip, which is then used during
calculation of timings for each OPP.
The algorithm in the driver needs these two sets to bound the timings.
Signed-off-by: Lukasz Luba <l.luba@xxxxxxxxxxxxxxxxxxx>
---
arch/arm/boot/dts/exynos5420.dtsi | 73 +++++++++++
arch/arm/boot/dts/exynos5422-odroid-core.dtsi | 116 ++++++++++++++++++
2 files changed, 189 insertions(+)
diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index d153617ff1a3..79e74ae80938 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -235,6 +235,31 @@
status = "disabled";
};
+ dmc: memory-controller@10c20000 {
+ compatible = "samsung,exynos5422-dmc";
+ reg = <0x10c20000 0x100>, <0x10c30000 0x100>;
+ clocks = <&clock CLK_FOUT_SPLL>,
+ <&clock CLK_MOUT_SCLK_SPLL>,
+ <&clock CLK_FF_DOUT_SPLL2>,
+ <&clock CLK_FOUT_BPLL>,
+ <&clock CLK_MOUT_BPLL>,
+ <&clock CLK_SCLK_BPLL>,
+ <&clock CLK_MOUT_MX_MSPLL_CCORE>,
+ <&clock CLK_MOUT_MX_MSPLL_CCORE_PHY>,
+ <&clock CLK_MOUT_MCLK_CDREX>;
+ clock-names = "fout_spll",
+ "mout_sclk_spll",
+ "ff_dout_spll2",
+ "fout_bpll",
+ "mout_bpll",
+ "sclk_bpll",
+ "mout_mx_mspll_ccore",
+ "mout_mx_mspll_ccore_phy",
+ "mout_mclk_cdrex";
+ samsung,syscon-clk = <&clock>;
+ status = "disabled";
+ };
+
nocp_mem0_0: nocp@10ca1000 {
compatible = "samsung,exynos5420-nocp";
reg = <0x10CA1000 0x200>;
@@ -271,6 +296,54 @@
status = "disabled";
};
+ ppmu_dmc0_0: ppmu@10d00000 {
+ compatible = "samsung,exynos-ppmu";
+ reg = <0x10d00000 0x2000>;
+ clocks = <&clock CLK_PCLK_PPMU_DREX0_0>;
+ clock-names = "ppmu";
+ events {
+ ppmu_event3_dmc0_0: ppmu-event3-dmc0_0 {
+ event-name = "ppmu-event3-dmc0_0";
+ };
+ };
+ };
+
+ ppmu_dmc0_1: ppmu@10d10000 {
+ compatible = "samsung,exynos-ppmu";
+ reg = <0x10d10000 0x2000>;
+ clocks = <&clock CLK_PCLK_PPMU_DREX0_1>;
+ clock-names = "ppmu";
+ events {
+ ppmu_event3_dmc0_1: ppmu-event3-dmc0_1 {
+ event-name = "ppmu-event3-dmc0_1";
+ };
+ };
+ };
+
+ ppmu_dmc1_0: ppmu@10d60000 {
+ compatible = "samsung,exynos-ppmu";
+ reg = <0x10d60000 0x2000>;
+ clocks = <&clock CLK_PCLK_PPMU_DREX1_0>;
+ clock-names = "ppmu";
+ events {
+ ppmu_event3_dmc1_0: ppmu-event3-dmc1_0 {
+ event-name = "ppmu-event3-dmc1_0";
+ };
+ };
+ };
+
+ ppmu_dmc1_1: ppmu@10d70000 {
+ compatible = "samsung,exynos-ppmu";
+ reg = <0x10d70000 0x2000>;
+ clocks = <&clock CLK_PCLK_PPMU_DREX1_1>;
+ clock-names = "ppmu";
+ events {
+ ppmu_event3_dmc1_1: ppmu-event3-dmc1_1 {
+ event-name = "ppmu-event3-dmc1_1";
+ };
+ };
+ };
+
gsc_pd: power-domain@10044000 {
compatible = "samsung,exynos4210-pd";
reg = <0x10044000 0x20>;
diff --git a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
index 25d95de15c9b..30e569c13ee7 100644
--- a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
@@ -34,6 +34,97 @@
clock-frequency = <24000000>;
};
};
+
+ dmc_opp_table: opp_table2 {
+ compatible = "operating-points-v2";
+
+ opp00 {
+ opp-hz = /bits/ 64 <165000000>;
+ opp-microvolt = <875000>;
+ };
+ opp01 {
+ opp-hz = /bits/ 64 <206000000>;
+ opp-microvolt = <875000>;
+ };
+ opp02 {
+ opp-hz = /bits/ 64 <275000000>;
+ opp-microvolt = <875000>;
+ };
+ opp03 {
+ opp-hz = /bits/ 64 <413000000>;
+ opp-microvolt = <887500>;
+ };
+ opp04 {
+ opp-hz = /bits/ 64 <543000000>;
+ opp-microvolt = <937500>;
+ };
+ opp05 {
+ opp-hz = /bits/ 64 <633000000>;
+ opp-microvolt = <1012500>;
+ };
+ opp06 {
+ opp-hz = /bits/ 64 <728000000>;
+ opp-microvolt = <1037500>;
+ };
+ opp07 {
+ opp-hz = /bits/ 64 <825000000>;
+ opp-microvolt = <1050000>;
+ };
+ };
+
+ samsung_K3QF2F20DB: lpddr3 {
+ compatible = "samsung,K3QF2F20DB", "jedec,lpddr3";
+ density = <16384>;
+ io-width = <32>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ tRFC-min-tck = <17>;
+ tRRD-min-tck = <2>;
+ tRPab-min-tck = <2>;
+ tRPpb-min-tck = <2>;
+ tRCD-min-tck = <3>;
+ tRC-min-tck = <6>;
+ tRAS-min-tck = <5>;
+ tWTR-min-tck = <2>;
+ tWR-min-tck = <7>;
+ tRTP-min-tck = <2>;
+ tW2W-C2C-min-tck = <0>;
+ tR2R-C2C-min-tck = <0>;
+ tWL-min-tck = <8>;
+ tDQSCK-min-tck = <5>;
+ tRL-min-tck = <14>;
+ tFAW-min-tck = <5>;
+ tXSR-min-tck = <12>;
+ tXP-min-tck = <2>;
+ tCKE-min-tck = <2>;
+ tCKESR-min-tck = <2>;
+ tMRD-min-tck = <5>;
+
+ timings_samsung_K3QF2F20DB_800mhz: lpddr3-timings@800000000 {
+ compatible = "jedec,lpddr3-timings";
+ reg = <800000000>; /* workaround: it shows max-freq */
+ min-freq = <100000000>;
+ tRFC = <65000>;
+ tRRD = <6000>;
+ tRPab = <12000>;
+ tRPpb = <12000>;
+ tRCD = <10000>;
+ tRC = <33750>;
+ tRAS = <23000>;
+ tWTR = <3750>;
+ tWR = <7500>;
+ tRTP = <3750>;
+ tW2W-C2C = <0>;
+ tR2R-C2C = <0>;
+ tFAW = <25000>;
+ tXSR = <70000>;
+ tXP = <3750>;
+ tCKE = <3750>;
+ tCKESR = <3750>;
+ tMRD = <7000>;
+ };
+ };
};
&adc {
@@ -132,6 +223,15 @@
cpu-supply = <&buck2_reg>;
};
+&dmc {
+ devfreq-events = <&ppmu_event3_dmc0_0>, <&ppmu_event3_dmc0_1>,
+ <&ppmu_event3_dmc1_0>, <&ppmu_event3_dmc1_1>;
+ device-handle = <&samsung_K3QF2F20DB>;
+ operating-points-v2 = <&dmc_opp_table>;
+ vdd-supply = <&buck1_reg>;
+ status = "okay";
+};
+
&hsi2c_4 {
status = "okay";
@@ -540,6 +640,22 @@
};
};
+&ppmu_dmc0_0 {
+ status = "okay";
+};
+
+&ppmu_dmc0_1 {
+ status = "okay";
+};
+
+&ppmu_dmc1_0 {
+ status = "okay";
+};
+
+&ppmu_dmc1_1 {
+ status = "okay";
+};
+
&tmu_cpu0 {
vtmu-supply = <&ldo7_reg>;
};
--
2.17.1
