[PATCH v7 07/13] dt-bindings: memory-controllers: add Exynos5422 DMC device description

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The patch adds description for DT binding for a new Exynos5422 Dynamic
Memory Controller device.

Signed-off-by: Lukasz Luba <l.luba@xxxxxxxxxxxxxxxxxxx>
---
 .../bindings/memory-controllers/exynos5422-dmc.txt | 74 ++++++++++++++++++++++
 1 file changed, 74 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/memory-controllers/exynos5422-dmc.txt

diff --git a/Documentation/devicetree/bindings/memory-controllers/exynos5422-dmc.txt b/Documentation/devicetree/bindings/memory-controllers/exynos5422-dmc.txt
new file mode 100644
index 0000000..be602a9
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/exynos5422-dmc.txt
@@ -0,0 +1,74 @@
+* Exynos5422 frequency and voltage scaling for Dynamic Memory Controller device
+
+The Samsung Exynos5422 SoC has DMC (Dynamic Memory Controller) to which the DRAM
+memory chips are connected. The driver is to monitor the controller in runtime
+and switch frequency and voltage. To monitor the usage of the controller in
+runtime, the driver uses the PPMU (Platform Performance Monitoring Unit), which
+is able to measure the current load of the memory.
+When 'userspace' governor is used for the driver, an application is able to
+switch the DMC and memory frequency.
+
+Required properties for DMC device for Exynos5422:
+- compatible: Should be "samsung,exynos5422-dmc".
+- clock-names : the name of clock used by the controller.
+- clocks : phandles for clock specified in "clock-names" property.
+- devfreq-events : phandles for PPMU devices connected to this DMC.
+- vdd-supply : phandle for voltage regulator which is connected.
+- reg : registers of two CDREX controllers.
+- operating-points-v2 : phandle for OPPs described in v2 definition.
+- device-handle : phandle of the connected DRAM memory device. For more
+	information please refer to Documentation
+- devfreq-events : phandles of the PPMU events used by the controller.
+- samsung,syscon-chipid : phandle of the ChipID used by the controller.
+- samsung,syscon-clk : phandle of the clock register set used by the controller.
+
+Example:
+
+	ppmu_dmc0_0: ppmu@10d00000 {
+		compatible = "samsung,exynos-ppmu";
+		reg = <0x10d00000 0x2000>;
+		clocks = <&clock CLK_PCLK_PPMU_DREX0_0>;
+		clock-names = "ppmu";
+		events {
+			ppmu_event_dmc0_0: ppmu-event3-dmc0_0 {
+				event-name = "ppmu-event3-dmc0_0";
+			};
+		};
+	};
+
+	dmc: memory-controller@10c20000 {
+		compatible = "samsung,exynos5422-dmc";
+		reg = <0x10c20000 0x100>, <0x10c30000 0x100>,
+		clocks = 	<&clock CLK_FOUT_SPLL>,
+				<&clock CLK_MOUT_SCLK_SPLL>,
+				<&clock CLK_FF_DOUT_SPLL2>,
+				<&clock CLK_FOUT_BPLL>,
+				<&clock CLK_MOUT_BPLL>,
+				<&clock CLK_SCLK_BPLL>,
+				<&clock CLK_MOUT_MX_MSPLL_CCORE>,
+				<&clock CLK_MOUT_MX_MSPLL_CCORE_PHY>,
+				<&clock CLK_MOUT_MCLK_CDREX>,
+				<&clock CLK_DOUT_CLK2X_PHY0>,
+				<&clock CLK_CLKM_PHY0>,
+				<&clock CLK_CLKM_PHY1>;
+		clock-names =	"fout_spll",
+				"mout_sclk_spll",
+				"ff_dout_spll2",
+				"fout_bpll",
+				"mout_bpll",
+				"sclk_bpll",
+				"mout_mx_mspll_ccore",
+				"mout_mx_mspll_ccore_phy",
+				"mout_mclk_cdrex",
+				"dout_clk2x_phy0",
+				"clkm_phy0",
+			        "clkm_phy1";
+		operating-points-v2 = <&dmc_opp_table>;
+		devfreq-events = <&ppmu_event3_dmc0_0>,	<&ppmu_event3_dmc0_1>,
+				<&ppmu_event3_dmc1_0>, <&ppmu_event3_dmc1_1>;
+		operating-points-v2 = <&dmc_opp_table>;
+		device-handle = <&samsung_K3QF2F20DB>;
+		vdd-supply = <&buck1_reg>;
+		samsung,syscon-clk = <&clock>;
+		samsung,syscon-chipid = <&chipid>;
+	};
-- 
2.7.4




[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux for Synopsys ARC Processors]    
  • [Linux on Unisoc (RDA Micro) SoCs]     [Linux Actions SoC]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  •   Powered by Linux