Hi all, This patch set extends PPMU on Samsung Exynos by choosing type of data which shell be counter in the PPMU registers. It is possible to count e.g. read or write requests, read or write data or latency. A new field has been added in the DT 'event' node called 'event-data-type'. It is them used during the setup of the counter. In the prevoius implementation there was always one option used: count read+write data. Sometimes we need more precised information and this patch set tries to address it. Changes: v3: - fixed wrong interpretation of ret value during DT parsing, which caused alwasy taking default value. v2: - removed new entry in MAINTAINERS file as suggested by Bartek Zolnierkiewicz and added new file to existing list for devfreq events - added in the dt-bindings/pmu/exynos_ppmu.h 2 new entries for RO and WO for counters in Exynos5433 - changed initialization with default values when data_type is not provided in DT (as sugessted by Chanwoo) - added 4th patch which adds 'event-data-type' to 'event' node for Exynos4412 PPMU events (asked by Chanwoo) Regards, Lukasz Luba Lukasz Luba (4): include: dt-bindings: add Performance Monitoring Unit for Exynos drivers: devfreq: events: extend events by type of counted data Documentation: devicetree: add PPMU events description DT: arm: exynos4412: add event data type which is monitored .../bindings/devfreq/event/exynos-ppmu.txt | 18 +++++++ MAINTAINERS | 1 + arch/arm/boot/dts/exynos4412-ppmu-common.dtsi | 10 ++++ drivers/devfreq/event/exynos-ppmu.c | 61 +++++++++++++++------- include/dt-bindings/pmu/exynos_ppmu.h | 26 +++++++++ include/linux/devfreq-event.h | 6 +++ 6 files changed, 103 insertions(+), 19 deletions(-) create mode 100644 include/dt-bindings/pmu/exynos_ppmu.h -- 2.7.4
