Re: [PATCH v2 6/8] DT: arm: exynos: add DMC device for exynos5422

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, 29 Jan 2019 at 18:55, Lukasz Luba <l.luba@xxxxxxxxxxxxxxxxxxx> wrote:
>
> Add description of Dynamic Memory Controller and PPMU counters.
> They are used by exynos5422-dmc driver.
>
> CC: Rob Herring <robh+dt@xxxxxxxxxx>
> CC: Mark Rutland <mark.rutland@xxxxxxx>
> CC: Kukjin Kim <kgene@xxxxxxxxxx>
> CC: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
> CC: devicetree@xxxxxxxxxxxxxxx
> CC: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> CC: linux-samsung-soc@xxxxxxxxxxxxxxx
> CC: linux-kernel@xxxxxxxxxxxxxxx
> Signed-off-by: Lukasz Luba <l.luba@xxxxxxxxxxxxxxxxxxx>
> ---
>  arch/arm/boot/dts/exynos5420.dtsi             | 69 +++++++++++++++++++++++++++
>  arch/arm/boot/dts/exynos5422-odroid-core.dtsi | 22 +++++++++
>  2 files changed, 91 insertions(+)
>
> diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
> index aaff158..4d76335 100644
> --- a/arch/arm/boot/dts/exynos5420.dtsi
> +++ b/arch/arm/boot/dts/exynos5420.dtsi
> @@ -235,6 +235,27 @@
>                         status = "disabled";
>                 };
>
> +               dmc: memory-controller@10c20000 {
> +                       compatible = "samsung,exynos5422-dmc";
> +                       reg = <0x10c20000 0x10000>, <0x10c30000 0x10000>,
> +                               <0x10030000 0x1000>, <0x10000000 0x1000>;
> +                       clocks = <&clock CLK_FOUT_SPLL>,
> +                               <&clock CLK_MOUT_SCLK_SPLL>,
> +                               <&clock CLK_FF_DOUT_SPLL2>,
> +                               <&clock CLK_FOUT_BPLL>, <&clock CLK_MOUT_BPLL>,
> +                               <&clock CLK_SCLK_BPLL>,
> +                               <&clock CLK_MOUT_MX_MSPLL_CCORE>,
> +                               <&clock CLK_MOUT_MX_MSPLL_CCORE_PHY>,
> +                               <&clock CLK_MOUT_MCLK_CDREX>,
> +                               <&clock CLK_DOUT_CLK2X_PHY0>,
> +                               <&clock CLK_CLKM_PHY0>, <&clock CLK_CLKM_PHY1>;
> +                       clock-names = "fout_spll", "mout_sclk_spll",
> +                               "ff_dout_spll2", "fout_bpll", "mout_bpll",
> +                               "sclk_bpll", "mout_mx_mspll_ccore",
> +                               "mout_mx_mspll_ccore_phy", "mout_mclk_cdrex",
> +                               "dout_clk2x_phy0", "clkm_phy0", "clkm_phy1";

We misunderstood each other. I did not ask for compaction into one
continued line but for proper indentation. Having one entry per one
line was fine because you have really a lot of entries and it was
making things easier to check.
It should look like:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/arm/boot/dts/exynos54xx.dtsi?h=v4.20#n78

Best regards,
Krzysztof



[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux for Synopsys ARC Processors]    
  • [Linux on Unisoc (RDA Micro) SoCs]     [Linux Actions SoC]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  •   Powered by Linux