On Fri, 28 Dec 2018 at 17:18, Paweł Chmiel <pawel.mikolaj.chmiel@xxxxxxxxx> wrote: > > This commit enables following drivers: > - i2c support (using s3c2410 driver) > - s5p-jpeg > - s5p-mfc > - exynos drm rotator > - pwm support > - pwm vibrator > - fixed regulator > - syscon poweroff > - Atmel maXTouch touchscreen > - Broadcom BCM4329 bluetooth over uart0 > - dma devices (so we can use pl330 dma driver) > > Disable DEBUG_LL. It's currently set to uart1, but if we want to use > it on Aries, we would need to switch uart2, to get any logs. > > Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@xxxxxxxxx> > Signed-off-by: Jonathan Bakker <xc-racer2@xxxxxxx> > --- > arch/arm/configs/s5pv210_defconfig | 41 ++++++++++++++++++++++-------- > 1 file changed, 30 insertions(+), 11 deletions(-) > > diff --git a/arch/arm/configs/s5pv210_defconfig b/arch/arm/configs/s5pv210_defconfig > index a077597369f1..951196bdf008 100644 > --- a/arch/arm/configs/s5pv210_defconfig > +++ b/arch/arm/configs/s5pv210_defconfig > @@ -1,24 +1,24 @@ > CONFIG_SYSVIPC=y > CONFIG_NO_HZ=y > CONFIG_HIGH_RES_TIMERS=y > +CONFIG_PREEMPT=y This and few other look like effect of savedefconfig. Please split such change to separate commit, before adding new features. Best regards, Krzysztof > CONFIG_CGROUPS=y > CONFIG_SYSFS_DEPRECATED=y > CONFIG_SYSFS_DEPRECATED_V2=y > CONFIG_BLK_DEV_INITRD=y > CONFIG_KALLSYMS_ALL=y > -CONFIG_MODULES=y > -CONFIG_MODULE_UNLOAD=y > -# CONFIG_BLK_DEV_BSG is not set > -CONFIG_PARTITION_ADVANCED=y > -CONFIG_BSD_DISKLABEL=y > -CONFIG_SOLARIS_X86_PARTITION=y > CONFIG_ARCH_S5PV210=y > CONFIG_VMSPLIT_2G=y > -CONFIG_PREEMPT=y > CONFIG_ARM_APPENDED_DTB=y > CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc" > CONFIG_VFP=y > CONFIG_NEON=y > +CONFIG_MODULES=y > +CONFIG_MODULE_UNLOAD=y > +# CONFIG_BLK_DEV_BSG is not set > +CONFIG_PARTITION_ADVANCED=y > +CONFIG_BSD_DISKLABEL=y > +CONFIG_SOLARIS_X86_PARTITION=y > CONFIG_NET=y > CONFIG_PACKET=y > CONFIG_UNIX=y > @@ -27,6 +27,11 @@ CONFIG_IP_PNP=y > CONFIG_IP_PNP_DHCP=y > CONFIG_IP_PNP_BOOTP=y > CONFIG_IP_PNP_RARP=y > +CONFIG_BT=m > +CONFIG_BT_RFCOMM=y > +CONFIG_BT_BNEP=y > +CONFIG_BT_HCIUART=m > +CONFIG_BT_HCIUART_BCM=y > CONFIG_CFG80211=m > CONFIG_MAC80211=m > CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" > @@ -44,21 +49,35 @@ CONFIG_INPUT_EVDEV=y > CONFIG_KEYBOARD_GPIO=y > # CONFIG_INPUT_MOUSE is not set > CONFIG_INPUT_TOUCHSCREEN=y > +CONFIG_TOUCHSCREEN_ATMEL_MXT=m > +CONFIG_INPUT_MISC=y > +CONFIG_INPUT_PWM_VIBRA=m > CONFIG_SERIAL_8250=y > CONFIG_SERIAL_SAMSUNG=y > CONFIG_SERIAL_SAMSUNG_CONSOLE=y > +CONFIG_SERIAL_DEV_BUS=y > CONFIG_HW_RANDOM=y > CONFIG_I2C_GPIO=y > +CONFIG_I2C_S3C2410=y > +CONFIG_POWER_RESET=y > +CONFIG_POWER_RESET_SYSCON_POWEROFF=y > CONFIG_POWER_SUPPLY=y > CONFIG_BATTERY_MAX17040=y > # CONFIG_HWMON is not set > CONFIG_MFD_MAX8998=y > CONFIG_REGULATOR=y > +CONFIG_REGULATOR_FIXED_VOLTAGE=y > CONFIG_REGULATOR_MAX8998=y > +CONFIG_MEDIA_SUPPORT=m > +CONFIG_MEDIA_CAMERA_SUPPORT=y > +CONFIG_V4L_MEM2MEM_DRIVERS=y > +CONFIG_VIDEO_SAMSUNG_S5P_JPEG=m > +CONFIG_VIDEO_SAMSUNG_S5P_MFC=m > CONFIG_DRM=y > CONFIG_DRM_EXYNOS=y > CONFIG_DRM_EXYNOS_FIMD=y > CONFIG_DRM_EXYNOS_DPI=y > +CONFIG_DRM_EXYNOS_ROTATOR=y > CONFIG_USB=y > CONFIG_USB_OTG=y > CONFIG_USB_EHCI_HCD=y > @@ -72,6 +91,9 @@ CONFIG_MMC_SDHCI_S3C=y > CONFIG_MMC_SDHCI_S3C_DMA=y > CONFIG_RTC_CLASS=y > CONFIG_RTC_DRV_MAX8998=m > +CONFIG_DMADEVICES=y > +CONFIG_PWM=y > +CONFIG_PWM_SAMSUNG=y > CONFIG_PHY_SAMSUNG_USB2=m > CONFIG_PHY_S5PV210_USB2=y > CONFIG_EXT2_FS=y > @@ -87,6 +109,7 @@ CONFIG_NLS_CODEPAGE_437=y > CONFIG_NLS_ASCII=y > CONFIG_NLS_ISO8859_1=y > CONFIG_NLS_UTF8=y > +CONFIG_CRC_CCITT=y > CONFIG_DEBUG_INFO=y > CONFIG_MAGIC_SYSRQ=y > CONFIG_DEBUG_KERNEL=y > @@ -96,7 +119,3 @@ CONFIG_DEBUG_SPINLOCK=y > CONFIG_DEBUG_MUTEXES=y > CONFIG_DEBUG_ATOMIC_SLEEP=y > CONFIG_DEBUG_USER=y > -CONFIG_DEBUG_LL=y > -CONFIG_DEBUG_S3C_UART1=y > -CONFIG_EARLY_PRINTK=y > -CONFIG_CRC_CCITT=y > -- > 2.17.1 >
