On Fri, 14 Dec 2018, Marek Szyprowski wrote: > From: Seung-Woo Kim <sw0312.kim@xxxxxxxxxxx> > > This driver can be used to communicate with Bluetooth chip in high-speed > UART mode, so increase the maximum baudrate to 3Mbps. > > Signed-off-by: Seung-Woo Kim <sw0312.kim@xxxxxxxxxxx> > [mszyprow: rephrased commit message] > Signed-off-by: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx> > --- > drivers/tty/serial/samsung.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c > index 2a49b6d876b8..9fc3559f80d9 100644 > --- a/drivers/tty/serial/samsung.c > +++ b/drivers/tty/serial/samsung.c > @@ -1287,7 +1287,7 @@ static void s3c24xx_serial_set_termios(struct uart_port *port, > * Ask the core to calculate the divisor for us. > */ > > - baud = uart_get_baud_rate(port, termios, old, 0, 115200*8); > + baud = uart_get_baud_rate(port, termios, old, 0, 3000000); Does that mean the low speed devices will stop working? It looks like this should be dynamically configurable based on what device is connected to it, no? > quot = s3c24xx_serial_getclk(ourport, baud, &clk, &clk_sel); > if (baud == 38400 && (port->flags & UPF_SPD_MASK) == UPF_SPD_CUST) > quot = port->custom_divisor; -- Lee Jones [李琼斯] Linaro Services Technical Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog
