[PATCHv5 0/6] Add support for UHS-I on Exynos5422 odroid boards

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This is series v4 since my previous patches were incomplete with driver
changes missing.

v5 changes.
drop the cd-gpios wp-gpio gpio pin setting, just add the pinctrl
configration to support write protect.

v4 changes.
squash cd-gpios and wp-gpio changes into single patch.
change the subject prefix to "ARM: dts: exynos:"

These changes add UHS-I tuning for dw_mmc-exynos driver.

Rebased on Krzysztof branch next/dt
[0] git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux.git 

Anand Moon (6):
  ARM: dts: exynos: Added UHS-I bus speed support
  ARM: dts: exynos: fix regulator min values of LDO13 for Odroid XU3/XU4
  ARM: dts: exynos: update maximum frequency for sdcard to 200MHz
  ARM: dts: exynos: Add pin configuration for SD write protect on Odroid
    XU3/XU4
  ARM: dts: exynos: update maximum frequency for emmc to 200MHz
  mmc: dw_mmc-exynos: Add tuning for sdr and ddr timing for USH-I mode

 arch/arm/boot/dts/exynos5420-pinctrl.dtsi          |  7 +++++++
 arch/arm/boot/dts/exynos5422-odroid-core.dtsi      |  8 ++++++--
 arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi |  1 +
 drivers/mmc/host/dw_mmc-exynos.c                   | 11 +++++++++++
 4 files changed, 25 insertions(+), 2 deletions(-)

-- 
2.17.1




[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  Powered by Linux