The mini2440 computer uses "active high" to signal that the "write protect"
of the inserted MMC is set. The current code uses the opposite, leading to
a wrong detection of write protection. The solution is simply to use
".wprotect_invert = 1" in the description of the MMC.
Signed-off-by: Cedric Roux <sed@xxxxxxx>
---
arch/arm/mach-s3c24xx/mach-mini2440.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/arch/arm/mach-s3c24xx/mach-mini2440.c b/arch/arm/mach-s3c24xx/mach-mini2440.c
index 4a0bf6abba8c..bfce7971d741 100644
--- a/arch/arm/mach-s3c24xx/mach-mini2440.c
+++ b/arch/arm/mach-s3c24xx/mach-mini2440.c
@@ -234,10 +234,11 @@ static struct s3c2410fb_mach_info mini2440_fb_info __initdata = {
/* MMC/SD */
static struct s3c24xx_mci_pdata mini2440_mmc_cfg __initdata = {
- .gpio_detect = S3C2410_GPG(8),
- .gpio_wprotect = S3C2410_GPH(8),
- .set_power = NULL,
- .ocr_avail = MMC_VDD_32_33|MMC_VDD_33_34,
+ .gpio_detect = S3C2410_GPG(8),
+ .gpio_wprotect = S3C2410_GPH(8),
+ .wprotect_invert = 1,
+ .set_power = NULL,
+ .ocr_avail = MMC_VDD_32_33|MMC_VDD_33_34,
};
/* NAND Flash on MINI2440 board */
--
2.18.0
