Re: [PATCH v5 5/9] drm/bridge: tc358764: Add DSI to LVDS bridge driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 26.07.2018 09:36, Archit Taneja wrote:
>
> On Wednesday 25 July 2018 09:16 PM, Andrzej Hajda wrote:
>> Add a drm_bridge driver for the Toshiba TC358764 DSI to LVDS bridge.
>>
>> Changes in v4:
>> - removed license blob,
>> - ordered includes,
>> - added error handling,
>> - fixed reset GPIO handling,
>> - added missing calls to the panel,
>> - custom OF graph code replaced with helpers,
>> - removed tc358764_poweroff from remove callback.
>> v5:
>> - fixed supply names,
>> - fixed broken console - added connector to fb_helper,
>> - added detach callback - unbinding works,
>> - fixed typo in error checking code,
>> - removed sparse bridge->encoder check - core does it already.
>>
>> Signed-off-by: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
>> Signed-off-by: Maciej Purski <m.purski@xxxxxxxxxxx>
>> [ a.hajda@xxxxxxxxxxx: v4, v5 ]
>> Signed-off-by: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
>> ---
>>   drivers/gpu/drm/bridge/Kconfig    |   8 +
>>   drivers/gpu/drm/bridge/Makefile   |   1 +
>>   drivers/gpu/drm/bridge/tc358764.c | 499 ++++++++++++++++++++++++++++++
>>   3 files changed, 508 insertions(+)
>>   create mode 100644 drivers/gpu/drm/bridge/tc358764.c
>>
>> diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig
>> index fa2c7997e2fd..f3da8a716833 100644
>> --- a/drivers/gpu/drm/bridge/Kconfig
>> +++ b/drivers/gpu/drm/bridge/Kconfig
>> @@ -110,6 +110,14 @@ config DRM_THINE_THC63LVD1024
>>   	---help---
>>   	  Thine THC63LVD1024 LVDS/parallel converter driver.
>>   
>> +config DRM_TOSHIBA_TC358764
>> +	tristate "TC358764 DSI/LVDS bridge"
>> +	depends on DRM && DRM_PANEL
>> +	depends on OF
>> +	select DRM_MIPI_DSI
>> +	help
>> +	  Toshiba TC358764 DSI/LVDS bridge driver.
>> +
>>   config DRM_TOSHIBA_TC358767
>>   	tristate "Toshiba TC358767 eDP bridge"
>>   	depends on OF
>> diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile
>> index 35f88d48ec20..bf7c0cecf227 100644
>> --- a/drivers/gpu/drm/bridge/Makefile
>> +++ b/drivers/gpu/drm/bridge/Makefile
>> @@ -10,6 +10,7 @@ obj-$(CONFIG_DRM_SIL_SII8620) += sil-sii8620.o
>>   obj-$(CONFIG_DRM_SII902X) += sii902x.o
>>   obj-$(CONFIG_DRM_SII9234) += sii9234.o
>>   obj-$(CONFIG_DRM_THINE_THC63LVD1024) += thc63lvd1024.o
>> +obj-$(CONFIG_DRM_TOSHIBA_TC358764) += tc358764.o
>>   obj-$(CONFIG_DRM_TOSHIBA_TC358767) += tc358767.o
>>   obj-$(CONFIG_DRM_ANALOGIX_DP) += analogix/
>>   obj-$(CONFIG_DRM_I2C_ADV7511) += adv7511/
>> diff --git a/drivers/gpu/drm/bridge/tc358764.c b/drivers/gpu/drm/bridge/tc358764.c
>> new file mode 100644
>> index 000000000000..779bc5fce22a
>> --- /dev/null
>> +++ b/drivers/gpu/drm/bridge/tc358764.c
>> @@ -0,0 +1,499 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * Copyright (C) 2018 Samsung Electronics Co., Ltd
>> + *
>> + * Authors:
>> + *	Andrzej Hajda <a.hajda@xxxxxxxxxxx>
>> + *	Maciej Purski <m.purski@xxxxxxxxxxx>
>> + */
>> +
>> +#include <drm/drm_atomic_helper.h>
>> +#include <drm/drm_crtc.h>
>> +#include <drm/drm_crtc_helper.h>
>> +#include <drm/drm_fb_helper.h>
>> +#include <drm/drm_mipi_dsi.h>
>> +#include <drm/drm_of.h>
>> +#include <drm/drm_panel.h>
>> +#include <drm/drmP.h>
>> +#include <linux/gpio/consumer.h>
>> +#include <linux/of_graph.h>
>> +#include <linux/regulator/consumer.h>
>> +#include <video/mipi_display.h>
>> +
>> +#define FLD_MASK(start, end)    (((1 << ((start) - (end) + 1)) - 1) << (end))
>> +#define FLD_VAL(val, start, end) (((val) << (end)) & FLD_MASK(start, end))
>> +
>> +/* PPI layer registers */
>> +#define PPI_STARTPPI		0x0104 /* START control bit */
>> +#define PPI_LPTXTIMECNT		0x0114 /* LPTX timing signal */
>> +#define PPI_LANEENABLE		0x0134 /* Enables each lane */
>> +#define PPI_TX_RX_TA		0x013C /* BTA timing parameters */
>> +#define PPI_D0S_CLRSIPOCOUNT	0x0164 /* Assertion timer for Lane 0 */
>> +#define PPI_D1S_CLRSIPOCOUNT	0x0168 /* Assertion timer for Lane 1 */
>> +#define PPI_D2S_CLRSIPOCOUNT	0x016C /* Assertion timer for Lane 2 */
>> +#define PPI_D3S_CLRSIPOCOUNT	0x0170 /* Assertion timer for Lane 3 */
>> +#define PPI_START_FUNCTION	1
>> +
>> +/* DSI layer registers */
>> +#define DSI_STARTDSI		0x0204 /* START control bit of DSI-TX */
>> +#define DSI_LANEENABLE		0x0210 /* Enables each lane */
>> +#define DSI_RX_START		1
>> +
>> +/* Video path registers */
>> +#define VP_CTRL			0x0450 /* Video Path Control */
>> +#define VP_CTRL_MSF(v)		FLD_VAL(v, 0, 0) /* Magic square in RGB666 */
>> +#define VP_CTRL_VTGEN(v)	FLD_VAL(v, 4, 4) /* Use chip clock for timing */
>> +#define VP_CTRL_EVTMODE(v)	FLD_VAL(v, 5, 5) /* Event mode */
>> +#define VP_CTRL_RGB888(v)	FLD_VAL(v, 8, 8) /* RGB888 mode */
>> +#define VP_CTRL_VSDELAY(v)	FLD_VAL(v, 31, 20) /* VSYNC delay */
>> +#define VP_CTRL_HSPOL		BIT(17) /* Polarity of HSYNC signal */
>> +#define VP_CTRL_DEPOL		BIT(18) /* Polarity of DE signal */
>> +#define VP_CTRL_VSPOL		BIT(19) /* Polarity of VSYNC signal */
>> +#define VP_HTIM1		0x0454 /* Horizontal Timing Control 1 */
>> +#define VP_HTIM1_HBP(v)		FLD_VAL(v, 24, 16)
>> +#define VP_HTIM1_HSYNC(v)	FLD_VAL(v, 8, 0)
>> +#define VP_HTIM2		0x0458 /* Horizontal Timing Control 2 */
>> +#define VP_HTIM2_HFP(v)		FLD_VAL(v, 24, 16)
>> +#define VP_HTIM2_HACT(v)	FLD_VAL(v, 10, 0)
>> +#define VP_VTIM1		0x045C /* Vertical Timing Control 1 */
>> +#define VP_VTIM1_VBP(v)		FLD_VAL(v, 23, 16)
>> +#define VP_VTIM1_VSYNC(v)	FLD_VAL(v, 7, 0)
>> +#define VP_VTIM2		0x0460 /* Vertical Timing Control 2 */
>> +#define VP_VTIM2_VFP(v)		FLD_VAL(v, 23, 16)
>> +#define VP_VTIM2_VACT(v)	FLD_VAL(v, 10, 0)
>> +#define VP_VFUEN		0x0464 /* Video Frame Timing Update Enable */
>> +
>> +/* LVDS registers */
>> +#define LV_MX0003		0x0480 /* Mux input bit 0 to 3 */
>> +#define LV_MX0407		0x0484 /* Mux input bit 4 to 7 */
>> +#define LV_MX0811		0x0488 /* Mux input bit 8 to 11 */
>> +#define LV_MX1215		0x048C /* Mux input bit 12 to 15 */
>> +#define LV_MX1619		0x0490 /* Mux input bit 16 to 19 */
>> +#define LV_MX2023		0x0494 /* Mux input bit 20 to 23 */
>> +#define LV_MX2427		0x0498 /* Mux input bit 24 to 27 */
>> +#define LV_MX(b0, b1, b2, b3)	(FLD_VAL(b0, 4, 0) | FLD_VAL(b1, 12, 8) | \
>> +				FLD_VAL(b2, 20, 16) | FLD_VAL(b3, 28, 24))
>> +
>> +/* Input bit numbers used in mux registers */
>> +enum {
>> +	LVI_R0,
>> +	LVI_R1,
>> +	LVI_R2,
>> +	LVI_R3,
>> +	LVI_R4,
>> +	LVI_R5,
>> +	LVI_R6,
>> +	LVI_R7,
>> +	LVI_G0,
>> +	LVI_G1,
>> +	LVI_G2,
>> +	LVI_G3,
>> +	LVI_G4,
>> +	LVI_G5,
>> +	LVI_G6,
>> +	LVI_G7,
>> +	LVI_B0,
>> +	LVI_B1,
>> +	LVI_B2,
>> +	LVI_B3,
>> +	LVI_B4,
>> +	LVI_B5,
>> +	LVI_B6,
>> +	LVI_B7,
>> +	LVI_HS,
>> +	LVI_VS,
>> +	LVI_DE,
>> +	LVI_L0
>> +};
>> +
>> +#define LV_CFG			0x049C /* LVDS Configuration */
>> +#define LV_PHY0			0x04A0 /* LVDS PHY 0 */
>> +#define LV_PHY0_RST(v)		FLD_VAL(v, 22, 22) /* PHY reset */
>> +#define LV_PHY0_IS(v)		FLD_VAL(v, 15, 14)
>> +#define LV_PHY0_ND(v)		FLD_VAL(v, 4, 0) /* Frequency range select */
>> +#define LV_PHY0_PRBS_ON(v)	FLD_VAL(v, 20, 16) /* Clock/Data Flag pins */
>> +
>> +/* System registers */
>> +#define SYS_RST			0x0504 /* System Reset */
>> +#define SYS_ID			0x0580 /* System ID */
>> +
>> +#define SYS_RST_I2CS		BIT(0) /* Reset I2C-Slave controller */
>> +#define SYS_RST_I2CM		BIT(1) /* Reset I2C-Master controller */
>> +#define SYS_RST_LCD		BIT(2) /* Reset LCD controller */
>> +#define SYS_RST_BM		BIT(3) /* Reset Bus Management controller */
>> +#define SYS_RST_DSIRX		BIT(4) /* Reset DSI-RX and App controller */
>> +#define SYS_RST_REG		BIT(5) /* Reset Register module */
>> +
>> +#define LPX_PERIOD		2
>> +#define TTA_SURE		3
>> +#define TTA_GET			0x20000
>> +
>> +/* Lane enable PPI and DSI register bits */
>> +#define LANEENABLE_CLEN		BIT(0)
>> +#define LANEENABLE_L0EN		BIT(1)
>> +#define LANEENABLE_L1EN		BIT(2)
>> +#define LANEENABLE_L2EN		BIT(3)
>> +#define LANEENABLE_L3EN		BIT(4)
>> +
>> +/* LVCFG fields */
>> +#define LV_CFG_LVEN		BIT(0)
>> +#define LV_CFG_LVDLINK		BIT(1)
>> +#define LV_CFG_CLKPOL1		BIT(2)
>> +#define LV_CFG_CLKPOL2		BIT(3)
>> +
>> +static const char * const tc358764_supplies[] = {
>> +	"vddc", "vddio", "vddlvds"
>> +};
>> +
>> +struct tc358764 {
>> +	struct device *dev;
>> +	struct drm_bridge bridge;
>> +	struct drm_connector connector;
>> +	struct regulator_bulk_data supplies[ARRAY_SIZE(tc358764_supplies)];
>> +	struct gpio_desc *gpio_reset;
>> +	struct drm_panel *panel;
>> +	int error;
>> +};
>> +
>> +static int tc358764_clear_error(struct tc358764 *ctx)
>> +{
>> +	int ret = ctx->error;
>> +
>> +	ctx->error = 0;
>> +	return ret;
>> +}
>> +
>> +static void tc358764_read(struct tc358764 *ctx, u16 addr, u32 *val)
>> +{
>> +	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
>> +	ssize_t ret;
>> +
>> +	if (ctx->error)
>> +		return;
>> +
>> +	cpu_to_le16s(&addr);
>> +	ret = mipi_dsi_generic_read(dsi, &addr, sizeof(addr), val, sizeof(*val));
>> +	if (ret >= 0)
>> +		le32_to_cpus(val);
>> +
>> +	dev_dbg(ctx->dev, "read: %d, addr: %d\n", addr, *val);
>> +}
>> +
>> +static void tc358764_write(struct tc358764 *ctx, u16 addr, u32 val)
>> +{
>> +	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
>> +	ssize_t ret;
>> +	u8 data[6];
>> +
>> +	if (ctx->error)
>> +		return;
>> +
>> +	data[0] = addr;
>> +	data[1] = addr >> 8;
>> +	data[2] = val;
>> +	data[3] = val >> 8;
>> +	data[4] = val >> 16;
>> +	data[5] = val >> 24;
>> +
>> +	ret = mipi_dsi_generic_write(dsi, data, sizeof(data));
>> +	if (ret < 0)
>> +		ctx->error = ret;
>> +}
>> +
>> +static inline struct tc358764 *bridge_to_tc358764(struct drm_bridge *bridge)
>> +{
>> +	return container_of(bridge, struct tc358764, bridge);
>> +}
>> +
>> +static inline
>> +struct tc358764 *connector_to_tc358764(struct drm_connector *connector)
>> +{
>> +	return container_of(connector, struct tc358764, connector);
>> +}
>> +
>> +static int tc358764_init(struct tc358764 *ctx)
>> +{
>> +	u32 v = 0;
>> +
>> +	tc358764_read(ctx, SYS_ID, &v);
>> +	if (ctx->error)
>> +		return tc358764_clear_error(ctx);
>> +	dev_info(ctx->dev, "ID: %#x\n", v);
>> +
>> +	/* configure PPI counters */
>> +	tc358764_write(ctx, PPI_TX_RX_TA, TTA_GET | TTA_SURE);
>> +	tc358764_write(ctx, PPI_LPTXTIMECNT, LPX_PERIOD);
>> +	tc358764_write(ctx, PPI_D0S_CLRSIPOCOUNT, 5);
>> +	tc358764_write(ctx, PPI_D1S_CLRSIPOCOUNT, 5);
>> +	tc358764_write(ctx, PPI_D2S_CLRSIPOCOUNT, 5);
>> +	tc358764_write(ctx, PPI_D3S_CLRSIPOCOUNT, 5);
>> +
>> +	/* enable four data lanes and clock lane */
>> +	tc358764_write(ctx, PPI_LANEENABLE, LANEENABLE_L3EN | LANEENABLE_L2EN |
>> +		       LANEENABLE_L1EN | LANEENABLE_L0EN | LANEENABLE_CLEN);
>> +	tc358764_write(ctx, DSI_LANEENABLE, LANEENABLE_L3EN | LANEENABLE_L2EN |
>> +		       LANEENABLE_L1EN | LANEENABLE_L0EN | LANEENABLE_CLEN);
>> +
>> +	/* start */
>> +	tc358764_write(ctx, PPI_STARTPPI, PPI_START_FUNCTION);
>> +	tc358764_write(ctx, DSI_STARTDSI, DSI_RX_START);
>> +
>> +	/* configure video path */
>> +	tc358764_write(ctx, VP_CTRL, VP_CTRL_VSDELAY(15) | VP_CTRL_RGB888(1) |
>> +		       VP_CTRL_EVTMODE(1) | VP_CTRL_HSPOL | VP_CTRL_VSPOL);
>> +
>> +	/* reset PHY */
>> +	tc358764_write(ctx, LV_PHY0, LV_PHY0_RST(1) |
>> +		       LV_PHY0_PRBS_ON(4) | LV_PHY0_IS(2) | LV_PHY0_ND(6));
>> +	tc358764_write(ctx, LV_PHY0, LV_PHY0_PRBS_ON(4) | LV_PHY0_IS(2) |
>> +		       LV_PHY0_ND(6));
>> +
>> +	/* reset bridge */
>> +	tc358764_write(ctx, SYS_RST, SYS_RST_LCD);
>> +
>> +	/* set bit order */
>> +	tc358764_write(ctx, LV_MX0003, LV_MX(LVI_R0, LVI_R1, LVI_R2, LVI_R3));
>> +	tc358764_write(ctx, LV_MX0407, LV_MX(LVI_R4, LVI_R7, LVI_R5, LVI_G0));
>> +	tc358764_write(ctx, LV_MX0811, LV_MX(LVI_G1, LVI_G2, LVI_G6, LVI_G7));
>> +	tc358764_write(ctx, LV_MX1215, LV_MX(LVI_G3, LVI_G4, LVI_G5, LVI_B0));
>> +	tc358764_write(ctx, LV_MX1619, LV_MX(LVI_B6, LVI_B7, LVI_B1, LVI_B2));
>> +	tc358764_write(ctx, LV_MX2023, LV_MX(LVI_B3, LVI_B4, LVI_B5, LVI_L0));
>> +	tc358764_write(ctx, LV_MX2427, LV_MX(LVI_HS, LVI_VS, LVI_DE, LVI_R6));
>> +	tc358764_write(ctx, LV_CFG, LV_CFG_CLKPOL2 | LV_CFG_CLKPOL1 |
>> +		       LV_CFG_LVEN);
>> +
>> +	return tc358764_clear_error(ctx);
>> +}
>> +
>> +static void tc358764_reset(struct tc358764 *ctx)
>> +{
>> +	gpiod_set_value(ctx->gpio_reset, 1);
>> +	usleep_range(1000, 2000);
>> +	gpiod_set_value(ctx->gpio_reset, 0);
>> +	usleep_range(1000, 2000);
>> +}
>> +
>> +static int tc358764_get_modes(struct drm_connector *connector)
>> +{
>> +	struct tc358764 *ctx = connector_to_tc358764(connector);
>> +
>> +	return drm_panel_get_modes(ctx->panel);
>> +}
>> +
>> +static const
>> +struct drm_connector_helper_funcs tc358764_connector_helper_funcs = {
>> +	.get_modes = tc358764_get_modes,
>> +};
>> +
>> +static const struct drm_connector_funcs tc358764_connector_funcs = {
>> +	.fill_modes = drm_helper_probe_single_connector_modes,
>> +	.destroy = drm_connector_cleanup,
>> +	.reset = drm_atomic_helper_connector_reset,
>> +	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
>> +	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
>> +};
>> +
>> +static void tc358764_disable(struct drm_bridge *bridge)
>> +{
>> +	struct tc358764 *ctx = bridge_to_tc358764(bridge);
>> +	int ret = drm_panel_disable(bridge_to_tc358764(bridge)->panel);
>> +
>> +	if (ret < 0)
>> +		dev_err(ctx->dev, "error disabling panel (%d)\n", ret);
>> +}
>> +
>> +static void tc358764_post_disable(struct drm_bridge *bridge)
>> +{
>> +	struct tc358764 *ctx = bridge_to_tc358764(bridge);
>> +	int ret;
>> +
>> +	ret = drm_panel_unprepare(ctx->panel);
>> +	if (ret < 0)
>> +		dev_err(ctx->dev, "error unpreparing panel (%d)\n", ret);
>> +	tc358764_reset(ctx);
>> +	usleep_range(10000, 15000);
>> +	ret = regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
>> +	if (ret < 0)
>> +		dev_err(ctx->dev, "error disabling regulators (%d)\n", ret);
>> +}
>> +
>> +static void tc358764_pre_enable(struct drm_bridge *bridge)
>> +{
>> +	struct tc358764 *ctx = bridge_to_tc358764(bridge);
>> +	int ret;
>> +
>> +	ret = regulator_bulk_enable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
>> +	if (ret < 0)
>> +		dev_err(ctx->dev, "error enabling regulators (%d)\n", ret);
>> +	usleep_range(10000, 15000);
>> +	tc358764_reset(ctx);
>> +	ret = tc358764_init(ctx);
>> +	if (ret < 0)
>> +		dev_err(ctx->dev, "error initializing bridge (%d)\n", ret);
>> +	ret = drm_panel_prepare(ctx->panel);
>> +	if (ret < 0)
>> +		dev_err(ctx->dev, "error preparing panel (%d)\n", ret);
>> +}
>> +
>> +static void tc358764_enable(struct drm_bridge *bridge)
>> +{
>> +	struct tc358764 *ctx = bridge_to_tc358764(bridge);
>> +	int ret = drm_panel_enable(ctx->panel);
>> +
>> +	if (ret < 0)
>> +		dev_err(ctx->dev, "error enabling panel (%d)\n", ret);
>> +}
>> +
>> +static int tc358764_attach(struct drm_bridge *bridge)
>> +{
>> +	struct tc358764 *ctx = bridge_to_tc358764(bridge);
>> +	struct drm_device *drm = bridge->dev;
>> +	int ret;
>> +
>> +	ctx->connector.polled = DRM_CONNECTOR_POLL_HPD;
>> +	ret = drm_connector_init(drm, &ctx->connector,
>> +				 &tc358764_connector_funcs,
>> +				 DRM_MODE_CONNECTOR_LVDS);
>> +	if (ret) {
>> +		DRM_ERROR("Failed to initialize connector\n");
>> +		return ret;
>> +	}
>> +
>> +	drm_connector_helper_add(&ctx->connector,
>> +				 &tc358764_connector_helper_funcs);
>> +	drm_mode_connector_attach_encoder(&ctx->connector, bridge->encoder);
>> +	drm_panel_attach(ctx->panel, &ctx->connector);
>> +	ctx->connector.funcs->reset(&ctx->connector);
>> +	drm_fb_helper_add_one_connector(drm->fb_helper, &ctx->connector);
>> +	drm_connector_register(&ctx->connector);
> Aren't drm_connector_register()/unregister calls managed by the drm
> core?

drm core registers connectors during initialization but tc358764_attach
can be called after bridge probe, also after drm initialization, in such
case connector should be dynamically allocated/de-allocated.

> Otherwise:
> Reviewed-by: Archit Taneja <architt@xxxxxxxxxxxxxx>

Thanks for the review, queued to drm-misc-next.

Regards
Andrzej


>
> Thanks,
> Archit
>
>> +
>> +	return 0;
>> +}
>> +
>> +static void tc358764_detach(struct drm_bridge *bridge)
>> +{
>> +	struct tc358764 *ctx = bridge_to_tc358764(bridge);
>> +	struct drm_device *drm = bridge->dev;
>> +
>> +	drm_connector_unregister(&ctx->connector);
>> +	drm_fb_helper_remove_one_connector(drm->fb_helper, &ctx->connector);
>> +	drm_panel_detach(ctx->panel);
>> +	ctx->panel = NULL;
>> +	drm_connector_unreference(&ctx->connector);
>> +}
>> +
>> +static const struct drm_bridge_funcs tc358764_bridge_funcs = {
>> +	.disable = tc358764_disable,
>> +	.post_disable = tc358764_post_disable,
>> +	.enable = tc358764_enable,
>> +	.pre_enable = tc358764_pre_enable,
>> +	.attach = tc358764_attach,
>> +	.detach = tc358764_detach,
>> +};
>> +
>> +static int tc358764_parse_dt(struct tc358764 *ctx)
>> +{
>> +	struct device *dev = ctx->dev;
>> +	int ret;
>> +
>> +	ctx->gpio_reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
>> +	if (IS_ERR(ctx->gpio_reset)) {
>> +		dev_err(dev, "no reset GPIO pin provided\n");
>> +		return PTR_ERR(ctx->gpio_reset);
>> +	}
>> +
>> +	ret = drm_of_find_panel_or_bridge(ctx->dev->of_node, 1, 0, &ctx->panel,
>> +					  NULL);
>> +	if (ret && ret != -EPROBE_DEFER)
>> +		dev_err(dev, "cannot find panel (%d)\n", ret);
>> +
>> +	return ret;
>> +}
>> +
>> +static int tc358764_configure_regulators(struct tc358764 *ctx)
>> +{
>> +	int i, ret;
>> +
>> +	for (i = 0; i < ARRAY_SIZE(ctx->supplies); ++i)
>> +		ctx->supplies[i].supply = tc358764_supplies[i];
>> +
>> +	ret = devm_regulator_bulk_get(ctx->dev, ARRAY_SIZE(ctx->supplies),
>> +				      ctx->supplies);
>> +	if (ret < 0)
>> +		dev_err(ctx->dev, "failed to get regulators: %d\n", ret);
>> +
>> +	return ret;
>> +}
>> +
>> +static int tc358764_probe(struct mipi_dsi_device *dsi)
>> +{
>> +	struct device *dev = &dsi->dev;
>> +	struct tc358764 *ctx;
>> +	int ret;
>> +
>> +	ctx = devm_kzalloc(dev, sizeof(struct tc358764), GFP_KERNEL);
>> +	if (!ctx)
>> +		return -ENOMEM;
>> +
>> +	mipi_dsi_set_drvdata(dsi, ctx);
>> +
>> +	ctx->dev = dev;
>> +
>> +	dsi->lanes = 4;
>> +	dsi->format = MIPI_DSI_FMT_RGB888;
>> +	dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST
>> +		| MIPI_DSI_MODE_VIDEO_AUTO_VERT | MIPI_DSI_MODE_LPM;
>> +
>> +	ret = tc358764_parse_dt(ctx);
>> +	if (ret < 0)
>> +		return ret;
>> +
>> +	ret = tc358764_configure_regulators(ctx);
>> +	if (ret < 0)
>> +		return ret;
>> +
>> +	ctx->bridge.funcs = &tc358764_bridge_funcs;
>> +	ctx->bridge.of_node = dev->of_node;
>> +
>> +	drm_bridge_add(&ctx->bridge);
>> +
>> +	ret = mipi_dsi_attach(dsi);
>> +	if (ret < 0) {
>> +		drm_bridge_remove(&ctx->bridge);
>> +		dev_err(dev, "failed to attach dsi\n");
>> +	}
>> +
>> +	return ret;
>> +}
>> +
>> +static int tc358764_remove(struct mipi_dsi_device *dsi)
>> +{
>> +	struct tc358764 *ctx = mipi_dsi_get_drvdata(dsi);
>> +
>> +	mipi_dsi_detach(dsi);
>> +	drm_bridge_remove(&ctx->bridge);
>> +
>> +	return 0;
>> +}
>> +
>> +static const struct of_device_id tc358764_of_match[] = {
>> +	{ .compatible = "toshiba,tc358764" },
>> +	{ }
>> +};
>> +MODULE_DEVICE_TABLE(of, tc358764_of_match);
>> +
>> +static struct mipi_dsi_driver tc358764_driver = {
>> +	.probe = tc358764_probe,
>> +	.remove = tc358764_remove,
>> +	.driver = {
>> +		.name = "tc358764",
>> +		.owner = THIS_MODULE,
>> +		.of_match_table = tc358764_of_match,
>> +	},
>> +};
>> +module_mipi_dsi_driver(tc358764_driver);
>> +
>> +MODULE_AUTHOR("Andrzej Hajda <a.hajda@xxxxxxxxxxx>");
>> +MODULE_AUTHOR("Maciej Purski <m.purski@xxxxxxxxxxx>");
>> +MODULE_DESCRIPTION("MIPI-DSI based Driver for TC358764 DSI/LVDS Bridge");
>> +MODULE_LICENSE("GPL v2");
>>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>
>

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  Powered by Linux