2018년 07월 24일 17:04에 Inki Dae 이(가) 쓴 글:
> Hi,
>
> 2018년 06월 19일 17:19에 Maciej Purski 이(가) 쓴 글:
>> The current implementation assumes that the only possible peripheral
>> device for DSIM is a panel. Using an output bridge child device
>> should also be possible.
>>
>> If an output bridge is available, don't create a new connector.
>> Instead, call drm_bridge_attach() and set encoder's bridge to NULL
>> in order to avoid an out bridge from being visible by the framework, as
>> the DSI bus needs control on enabling its child output bridge.
>>
>> Such sequence is required by Toshiba TC358764 bridge, which is a DSI
>> peripheral bridge device.
>
> Right, we should consider DSI to LVDS bridge.
In addition, could you update below binding document?
Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt
Thanks,
Inki Dae
>
> Thanks,
> Inki Dae
>
>>
>> Signed-off-by: Maciej Purski <m.purski@xxxxxxxxxxx>
>> ---
>> drivers/gpu/drm/exynos/exynos_drm_dsi.c | 38 ++++++++++++++++++++++-----------
>> 1 file changed, 25 insertions(+), 13 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/exynos/exynos_drm_dsi.c b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
>> index 9599e6b..c0408c0 100644
>> --- a/drivers/gpu/drm/exynos/exynos_drm_dsi.c
>> +++ b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
>> @@ -255,6 +255,7 @@ struct exynos_dsi {
>> struct mipi_dsi_host dsi_host;
>> struct drm_connector connector;
>> struct drm_panel *panel;
>> + struct drm_bridge *out_bridge;
>> struct device *dev;
>>
>> void __iomem *reg_base;
>> @@ -1499,7 +1500,30 @@ static int exynos_dsi_host_attach(struct mipi_dsi_host *host,
>> struct mipi_dsi_device *device)
>> {
>> struct exynos_dsi *dsi = host_to_dsi(host);
>> - struct drm_device *drm = dsi->connector.dev;
>> + struct drm_encoder *encoder = &dsi->encoder;
>> + struct drm_device *drm = encoder->dev;
>> + struct drm_bridge *out_bridge;
>> +
>> + out_bridge = of_drm_find_bridge(device->dev.of_node);
>> + if (out_bridge) {
>> + drm_bridge_attach(encoder, out_bridge, NULL);
>> + dsi->out_bridge = out_bridge;
>> + encoder->bridge = NULL;
>> + } else {
>> + int ret = exynos_dsi_create_connector(encoder);
>> +
>> + if (ret) {
>> + DRM_ERROR("failed to create connector ret = %d\n", ret);
>> + drm_encoder_cleanup(encoder);
>> + return ret;
>> + }
>> +
>> + dsi->panel = of_drm_find_panel(device->dev.of_node);
>> + if (dsi->panel) {
>> + drm_panel_attach(dsi->panel, &dsi->connector);
>> + dsi->connector.status = connector_status_connected;
>> + }
>> + }
>>
>> /*
>> * This is a temporary solution and should be made by more generic way.
>> @@ -1518,11 +1542,6 @@ static int exynos_dsi_host_attach(struct mipi_dsi_host *host,
>> dsi->lanes = device->lanes;
>> dsi->format = device->format;
>> dsi->mode_flags = device->mode_flags;
>> - dsi->panel = of_drm_find_panel(device->dev.of_node);
>> - if (dsi->panel) {
>> - drm_panel_attach(dsi->panel, &dsi->connector);
>> - dsi->connector.status = connector_status_connected;
>> - }
>> exynos_drm_crtc_get_by_type(drm, EXYNOS_DISPLAY_TYPE_LCD)->i80_mode =
>> !(dsi->mode_flags & MIPI_DSI_MODE_VIDEO);
>>
>> @@ -1654,13 +1673,6 @@ static int exynos_dsi_bind(struct device *dev, struct device *master,
>> if (ret < 0)
>> return ret;
>>
>> - ret = exynos_dsi_create_connector(encoder);
>> - if (ret) {
>> - DRM_ERROR("failed to create connector ret = %d\n", ret);
>> - drm_encoder_cleanup(encoder);
>> - return ret;
>> - }
>> -
>> if (dsi->mic_bridge_node) {
>> mic_bridge = of_drm_find_bridge(dsi->mic_bridge_node);
>> if (mic_bridge)
>>
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
