On Mon, Jun 11, 2018 at 8:48 AM, Marek Szyprowski <m.szyprowski@xxxxxxxxxxx> wrote: > dw_mci_exynos_resume_noirq() performs DWMMC register access without > ensuring that respective clocks are enabled. This might cause external > abort on some systems (observed on Exynos5433 based boards). Fix this > by adding needed prepare_enable/disable_unprepare calls. > > Signed-off-by: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx> > --- > drivers/mmc/host/dw_mmc-exynos.c | 6 ++++++ > 1 file changed, 6 insertions(+) > > diff --git a/drivers/mmc/host/dw_mmc-exynos.c b/drivers/mmc/host/dw_mmc-exynos.c > index 3164681108ae..6125b68726b0 100644 > --- a/drivers/mmc/host/dw_mmc-exynos.c > +++ b/drivers/mmc/host/dw_mmc-exynos.c > @@ -193,6 +193,9 @@ static int dw_mci_exynos_resume_noirq(struct device *dev) > struct dw_mci_exynos_priv_data *priv = host->priv; > u32 clksel; > > + clk_prepare_enable(host->biu_clk); > + clk_prepare_enable(host->ciu_clk); The return code of clk_prepare_enable() should be checked. Best regards, Krzysztof > + > if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 || > priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU) > clksel = mci_readl(host, CLKSEL64); > @@ -207,6 +210,9 @@ static int dw_mci_exynos_resume_noirq(struct device *dev) > mci_writel(host, CLKSEL, clksel); > } > > + clk_disable_unprepare(host->biu_clk); > + clk_disable_unprepare(host->ciu_clk); > + > return 0; > } > #else > -- > 2.17.1 > -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
 |