There is no need to flip reset pin twice. Also delays can be changed to
values present in vendor's code.
Signed-off-by: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
---
Hi,
This is v2 of forgotten patch, awaiting reviewers, any volunteers.
Also "drm/bridge/sii8620: fix loops in EDID fetch logic" waits for reviewers.
In this version I have completely removed reset function, and moved its body
to sii8620_hw_on.
Regards
Andrzej
---
drivers/gpu/drm/bridge/sil-sii8620.c | 23 ++++++++++-------------
1 file changed, 10 insertions(+), 13 deletions(-)
diff --git a/drivers/gpu/drm/bridge/sil-sii8620.c b/drivers/gpu/drm/bridge/sil-sii8620.c
index 7ab36042a822..d1e780fba4b6 100644
--- a/drivers/gpu/drm/bridge/sil-sii8620.c
+++ b/drivers/gpu/drm/bridge/sil-sii8620.c
@@ -971,8 +971,17 @@ static int sii8620_hw_on(struct sii8620 *ctx)
ret = regulator_bulk_enable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
if (ret)
return ret;
+
usleep_range(10000, 20000);
- return clk_prepare_enable(ctx->clk_xtal);
+ ret = clk_prepare_enable(ctx->clk_xtal);
+ if (ret)
+ return ret;
+
+ msleep(100);
+ gpiod_set_value(ctx->gpio_reset, 0);
+ msleep(100);
+
+ return 0;
}
static int sii8620_hw_off(struct sii8620 *ctx)
@@ -982,17 +991,6 @@ static int sii8620_hw_off(struct sii8620 *ctx)
return regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
}
-static void sii8620_hw_reset(struct sii8620 *ctx)
-{
- usleep_range(10000, 20000);
- gpiod_set_value(ctx->gpio_reset, 0);
- usleep_range(5000, 20000);
- gpiod_set_value(ctx->gpio_reset, 1);
- usleep_range(10000, 20000);
- gpiod_set_value(ctx->gpio_reset, 0);
- msleep(300);
-}
-
static void sii8620_cbus_reset(struct sii8620 *ctx)
{
sii8620_write(ctx, REG_PWD_SRST, BIT_PWD_SRST_CBUS_RST
@@ -2112,7 +2110,6 @@ static void sii8620_cable_in(struct sii8620 *ctx)
dev_err(dev, "Error powering on, %d.\n", ret);
return;
}
- sii8620_hw_reset(ctx);
sii8620_read_buf(ctx, REG_VND_IDL, ver, ARRAY_SIZE(ver));
ret = sii8620_clear_error(ctx);
--
2.17.1
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
