Hi Maciej,
On Wednesday, 30 May 2018 15:15:58 EEST Maciej Purski wrote:
> From: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
>
> The patch adds bindings to Toshiba DSI/LVDS bridge TC358764.
> Bindings describe power supplies, reset gpio and video interfaces.
>
> Signed-off-by: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
> Signed-off-by: Maciej Purski <m.purski@xxxxxxxxxxx>
> ---
> .../bindings/display/bridge/toshiba,tc358764.txt | 37 +++++++++++++++++++
> 1 file changed, 37 insertions(+)
> create mode 100644
> Documentation/devicetree/bindings/display/bridge/toshiba,tc358764.txt
>
> diff --git
> a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358764.txt
> b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358764.txt new
> file mode 100644
> index 0000000..6eda14f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358764.txt
> @@ -0,0 +1,37 @@
> +TC358764 MIPI-DSI to LVDS panel bridge
> +
> +Required properties:
> + - compatible: "toshiba,tc358764"
> + - reg: the virtual channel number of a DSI peripheral
> + - vddc-supply: core voltage supply, 1.2V
> + - vddio-supply: I/O voltage supply, 1.8V or 3.3V
> + - vddlvds-supply: LVDS1/2 voltage supply, 3.3V
> + - reset-gpios: a GPIO spec for the reset pin
> +
> +The device node can contain zero to two 'port' child nodes, each with one
> +child 'endpoint' node, according to the bindings defined in [1].
> +The following are properties specific to those nodes.
> +
> +port:
> + - reg: (required) can be 0 for DSI port or 1 for LVDS port;
> +
> +[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
Could you please take the comments I made on v1 into account when you'll post
v3 ?
> +Example:
> +
> + bridge@0 {
> + reg = <0>;
> + compatible = "toshiba,tc358764";
> + vddc-supply = <&vcc_1v2_reg>;
> + vddio-supply = <&vcc_1v8_reg>;
> + vddlvds-supply = <&vcc_3v3_reg>;
> + reset-gpios = <&gpd1 6 GPIO_ACTIVE_LOW>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + port@1 {
> + reg = <1>;
> + lvds_ep: endpoint {
> + remote-endpoint = <&panel_ep>;
> + };
> + };
> + };
--
Regards,
Laurent Pinchart
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
