On Wed, Jan 17, 2018 at 11:58:44PM +1100, Simon Shields wrote: > "midas" is the codename for a family of smartphones released by Samsung > Mobile. It includes the Galaxy S3 (GT-I9300/I9305) and the Galaxy > Note 2 (GT-N7100/N7105). The boards largely have the same peripherals: > the main differences are touchscreen, display panel and cellular modem. > > Signed-off-by: Simon Shields <simon@xxxxxxxxxxxxx> > --- > arch/arm/boot/dts/Makefile | 3 ++ > arch/arm/boot/dts/exynos4412-i9300.dts | 22 +++++++++++++ > arch/arm/boot/dts/exynos4412-i9305.dts | 20 ++++++++++++ > arch/arm/boot/dts/exynos4412-n710x.dts | 59 ++++++++++++++++++++++++++++++++++ > 4 files changed, 104 insertions(+) > create mode 100644 arch/arm/boot/dts/exynos4412-i9300.dts > create mode 100644 arch/arm/boot/dts/exynos4412-i9305.dts > create mode 100644 arch/arm/boot/dts/exynos4412-n710x.dts > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > index 66e28af289da..955ef9df1b6b 100644 > --- a/arch/arm/boot/dts/Makefile > +++ b/arch/arm/boot/dts/Makefile > @@ -163,7 +163,10 @@ dtb-$(CONFIG_ARCH_EXYNOS4) += \ > exynos4210-smdkv310.dtb \ > exynos4210-trats.dtb \ > exynos4210-universal_c210.dtb \ > + exynos4412-i9300.dtb \ > + exynos4412-i9305.dtb \ > exynos4412-itop-elite.dtb \ > + exynos4412-n710x.dtb \ > exynos4412-odroidu3.dtb \ > exynos4412-odroidx.dtb \ > exynos4412-odroidx2.dtb \ > diff --git a/arch/arm/boot/dts/exynos4412-i9300.dts b/arch/arm/boot/dts/exynos4412-i9300.dts > new file mode 100644 > index 000000000000..f8125a945f8d > --- /dev/null > +++ b/arch/arm/boot/dts/exynos4412-i9300.dts > @@ -0,0 +1,22 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Samsung's Exynos4412 based M0 (GT-I9300) board device tree source > + * > + * Copyright (c) 2013 Samsung Electronics Co., Ltd. > + * http://www.samsung.com > + */ > + > +/dts-v1/; > +#include "exynos4412-galaxy-s3.dtsi" > + > +/ { > + model = "Samsung Galaxy S3 (GT-I9300) based on Exynos4412"; > + compatible = "samsung,i9300", "samsung,midas", "samsung,exynos4412", "samsung,exynos4"; > + > + /* bootargs are passed in by bootloader */ > + > + memory@40000000 { > + device_type = "memory"; > + reg = <0x40000000 0x40000000>; > + }; > +}; > diff --git a/arch/arm/boot/dts/exynos4412-i9305.dts b/arch/arm/boot/dts/exynos4412-i9305.dts > new file mode 100644 > index 000000000000..54a2a55dbf70 > --- /dev/null > +++ b/arch/arm/boot/dts/exynos4412-i9305.dts > @@ -0,0 +1,20 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/dts-v1/; > +#include "exynos4412-galaxy-s3.dtsi" > + > +/ { > + model = "Samsung Galaxy S3 (GT-I9305) based on Exynos4412"; > + compatible = "samsung,i9305", "samsung,midas", "samsung,exynos4412", "samsung,exynos4"; > + > + /* bootargs are passed in by bootloader */ > + > + memory@40000000 { > + device_type = "memory"; > + reg = <0x40000000 0x80000000>; > + }; > +}; > + > +&i2c0_bus { > + /* SCL and SDA pins are swapped */ > + samsung,pins = "gpd1-1", "gpd1-0"; > +}; > diff --git a/arch/arm/boot/dts/exynos4412-n710x.dts b/arch/arm/boot/dts/exynos4412-n710x.dts > new file mode 100644 > index 000000000000..b64aa9b61763 > --- /dev/null > +++ b/arch/arm/boot/dts/exynos4412-n710x.dts > @@ -0,0 +1,59 @@ > +// SPDX-License-Identifier: GPL-2.0 Here, and in other files in this patchset you can add your own copyrights/authorship if you wish. If you do not wish, there is no problem from my side. > +/dts-v1/; > +#include "exynos4412-midas.dtsi" > + > +/ { > + compatible = "samsung,n710x", "samsung,midas", "samsung,exynos4412", "samsung,exynos4"; > + model = "Samsung Galaxy Note 2 (GT-N7100, GT-N7105) based on Exynos4412"; > + > + memory@40000000 { > + device_type = "memory"; > + reg = <0x40000000 0x80000000>; > + }; > + > + /* bootargs are passed in by bootloader */ > + > + regulators { > + cam_vdda_reg: voltage-regulator-9 { > + compatible = "regulator-fixed"; > + regulator-name = "CAM_SENSOR_CORE_1.2V"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + gpio = <&gpm4 1 GPIO_ACTIVE_HIGH>; > + enable-active-high; > + }; > + }; > +}; > + > +&buck9_reg { > + maxim,ena-gpios = <&gpm1 0 GPIO_ACTIVE_HIGH>; > + status = "okay"; Without status. > +}; > + > +&cam_af_reg { > + gpio = <&gpm1 1 GPIO_ACTIVE_HIGH>; > + status = "okay"; > +}; > + > +&cam_io_reg { > + gpio = <&gpm0 7 GPIO_ACTIVE_HIGH>; > + status = "okay"; > +}; > + > +&ldo13_reg { > + regulator-name = "VCC_1.8V_LCD"; > + regulator-always-on; > +}; > + > +&ldo25_reg { > + regulator-name = "VCI_3.0V_LCD"; > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3000000>; > + status = "okay"; Without status. Best regards, Krzysztof > +}; > + > +&s5c73m3 { > + standby-gpios = <&gpm0 6 GPIO_ACTIVE_LOW>; /* ISP_STANDBY */ > + vdda-supply = <&cam_vdda_reg>; > + status = "okay"; > +}; > -- > 2.15.1 > -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
 |