"midas" is the codename for a family of smartphones released by Samsung Mobile. It includes the Galaxy S3 (GT-I9300/I9305) and the Galaxy Note 2 (GT-N7100/N7105). The boards largely have the same peripherals: the main differences are touchscreen, display panel and cellular modem. Signed-off-by: Simon Shields <simon@xxxxxxxxxxxxx> --- arch/arm/boot/dts/Makefile | 3 ++ arch/arm/boot/dts/exynos4412-i9300.dts | 22 +++++++++++++ arch/arm/boot/dts/exynos4412-i9305.dts | 20 ++++++++++++ arch/arm/boot/dts/exynos4412-n710x.dts | 59 ++++++++++++++++++++++++++++++++++ 4 files changed, 104 insertions(+) create mode 100644 arch/arm/boot/dts/exynos4412-i9300.dts create mode 100644 arch/arm/boot/dts/exynos4412-i9305.dts create mode 100644 arch/arm/boot/dts/exynos4412-n710x.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 66e28af289da..955ef9df1b6b 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -163,7 +163,10 @@ dtb-$(CONFIG_ARCH_EXYNOS4) += \ exynos4210-smdkv310.dtb \ exynos4210-trats.dtb \ exynos4210-universal_c210.dtb \ + exynos4412-i9300.dtb \ + exynos4412-i9305.dtb \ exynos4412-itop-elite.dtb \ + exynos4412-n710x.dtb \ exynos4412-odroidu3.dtb \ exynos4412-odroidx.dtb \ exynos4412-odroidx2.dtb \ diff --git a/arch/arm/boot/dts/exynos4412-i9300.dts b/arch/arm/boot/dts/exynos4412-i9300.dts new file mode 100644 index 000000000000..f8125a945f8d --- /dev/null +++ b/arch/arm/boot/dts/exynos4412-i9300.dts @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Samsung's Exynos4412 based M0 (GT-I9300) board device tree source + * + * Copyright (c) 2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + */ + +/dts-v1/; +#include "exynos4412-galaxy-s3.dtsi" + +/ { + model = "Samsung Galaxy S3 (GT-I9300) based on Exynos4412"; + compatible = "samsung,i9300", "samsung,midas", "samsung,exynos4412", "samsung,exynos4"; + + /* bootargs are passed in by bootloader */ + + memory@40000000 { + device_type = "memory"; + reg = <0x40000000 0x40000000>; + }; +}; diff --git a/arch/arm/boot/dts/exynos4412-i9305.dts b/arch/arm/boot/dts/exynos4412-i9305.dts new file mode 100644 index 000000000000..54a2a55dbf70 --- /dev/null +++ b/arch/arm/boot/dts/exynos4412-i9305.dts @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; +#include "exynos4412-galaxy-s3.dtsi" + +/ { + model = "Samsung Galaxy S3 (GT-I9305) based on Exynos4412"; + compatible = "samsung,i9305", "samsung,midas", "samsung,exynos4412", "samsung,exynos4"; + + /* bootargs are passed in by bootloader */ + + memory@40000000 { + device_type = "memory"; + reg = <0x40000000 0x80000000>; + }; +}; + +&i2c0_bus { + /* SCL and SDA pins are swapped */ + samsung,pins = "gpd1-1", "gpd1-0"; +}; diff --git a/arch/arm/boot/dts/exynos4412-n710x.dts b/arch/arm/boot/dts/exynos4412-n710x.dts new file mode 100644 index 000000000000..b64aa9b61763 --- /dev/null +++ b/arch/arm/boot/dts/exynos4412-n710x.dts @@ -0,0 +1,59 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; +#include "exynos4412-midas.dtsi" + +/ { + compatible = "samsung,n710x", "samsung,midas", "samsung,exynos4412", "samsung,exynos4"; + model = "Samsung Galaxy Note 2 (GT-N7100, GT-N7105) based on Exynos4412"; + + memory@40000000 { + device_type = "memory"; + reg = <0x40000000 0x80000000>; + }; + + /* bootargs are passed in by bootloader */ + + regulators { + cam_vdda_reg: voltage-regulator-9 { + compatible = "regulator-fixed"; + regulator-name = "CAM_SENSOR_CORE_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + gpio = <&gpm4 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + }; +}; + +&buck9_reg { + maxim,ena-gpios = <&gpm1 0 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&cam_af_reg { + gpio = <&gpm1 1 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&cam_io_reg { + gpio = <&gpm0 7 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&ldo13_reg { + regulator-name = "VCC_1.8V_LCD"; + regulator-always-on; +}; + +&ldo25_reg { + regulator-name = "VCI_3.0V_LCD"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + status = "okay"; +}; + +&s5c73m3 { + standby-gpios = <&gpm0 6 GPIO_ACTIVE_LOW>; /* ISP_STANDBY */ + vdda-supply = <&cam_vdda_reg>; + status = "okay"; +}; -- 2.15.1 -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
 |