DECON requires different interrupts depending on mode of work, which depends on panel it is connected to. Signed-off-by: Andrzej Hajda <a.hajda@xxxxxxxxxxx> --- .../devicetree/bindings/display/exynos/exynos5433-decon.txt | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/Documentation/devicetree/bindings/display/exynos/exynos5433-decon.txt b/Documentation/devicetree/bindings/display/exynos/exynos5433-decon.txt index c9fd7b3..ba6be99 100644 --- a/Documentation/devicetree/bindings/display/exynos/exynos5433-decon.txt +++ b/Documentation/devicetree/bindings/display/exynos/exynos5433-decon.txt @@ -8,12 +8,12 @@ Required properties: - compatible: value should be one of: "samsung,exynos5433-decon", "samsung,exynos5433-decon-tv"; - reg: physical base address and length of the DECON registers set. -- interrupts: should contain a list of all DECON IP block interrupts in the - order: VSYNC, LCD_SYSTEM. The interrupt specifier format - depends on the interrupt controller used. -- interrupt-names: should contain the interrupt names: "vsync", "lcd_sys" - in the same order as they were listed in the interrupts - property. +- interrupt-names: should contain the interrupt names depending on mode of work: + video mode: "vsync", + command mode: "lcd_sys". +- interrupts or interrupts-extended: list of interrupt specifiers corresponding + to names privided in interrupt-names, as described in + interrupt-controller/interrupts.txt - clocks: must include clock specifiers corresponding to entries in the clock-names property. - clock-names: list of clock names sorted in the same order as the clocks -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
 |