In case of clock setup error it is enough to log it once.
Moreover patch simplifies clock setup routines.
Signed-off-by: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
---
drivers/i2c/busses/i2c-exynos5.c | 24 +++++++-----------------
1 file changed, 7 insertions(+), 17 deletions(-)
diff --git a/drivers/i2c/busses/i2c-exynos5.c b/drivers/i2c/busses/i2c-exynos5.c
index 54df9e6..bc2b5db 100644
--- a/drivers/i2c/busses/i2c-exynos5.c
+++ b/drivers/i2c/busses/i2c-exynos5.c
@@ -309,7 +309,8 @@ static int exynos5_i2c_set_timing(struct exynos5_i2c *i2c, bool hs_timings)
div = temp / 512;
clk_cycle = temp / (div + 1) - 2;
if (temp < 4 || div >= 256 || clk_cycle < 2) {
- dev_warn(i2c->dev, "Failed to calculate divisor");
+ dev_err(i2c->dev, "%s clock set-up failed\n",
+ hs_timings ? "HS" : "FS");
return -EINVAL;
}
@@ -351,24 +352,13 @@ static int exynos5_i2c_set_timing(struct exynos5_i2c *i2c, bool hs_timings)
static int exynos5_hsi2c_clock_setup(struct exynos5_i2c *i2c)
{
- /*
- * Configure the Fast speed timing values
- * Even the High Speed mode initially starts with Fast mode
- */
- if (exynos5_i2c_set_timing(i2c, false)) {
- dev_err(i2c->dev, "HSI2C FS Clock set up failed\n");
- return -EINVAL;
- }
+ /* always set Fast Speed timings */
+ int ret = exynos5_i2c_set_timing(i2c, false);
- /* configure the High speed timing values */
- if (i2c->op_clock >= HSI2C_HS_TX_CLOCK) {
- if (exynos5_i2c_set_timing(i2c, true)) {
- dev_err(i2c->dev, "HSI2C HS Clock set up failed\n");
- return -EINVAL;
- }
- }
+ if (ret < 0 || i2c->op_clock < HSI2C_HS_TX_CLOCK)
+ return ret;
- return 0;
+ return exynos5_i2c_set_timing(i2c, true);
}
/*
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
