There is no need to keep separate settings for high and fast speed clock. Signed-off-by: Andrzej Hajda <a.hajda@xxxxxxxxxxx> --- drivers/i2c/busses/i2c-exynos5.c | 45 +++++++++++----------------------------- 1 file changed, 12 insertions(+), 33 deletions(-) diff --git a/drivers/i2c/busses/i2c-exynos5.c b/drivers/i2c/busses/i2c-exynos5.c index 04127b8..54df9e6 100644 --- a/drivers/i2c/busses/i2c-exynos5.c +++ b/drivers/i2c/busses/i2c-exynos5.c @@ -168,8 +168,6 @@ */ #define HSI2C_HS_TX_CLOCK 1000000 #define HSI2C_FS_TX_CLOCK 100000 -#define HSI2C_HIGH_SPD 1 -#define HSI2C_FAST_SPD 0 #define EXYNOS5_I2C_TIMEOUT (msecs_to_jiffies(1000)) @@ -200,15 +198,7 @@ struct exynos5_i2c { int trans_done; /* Controller operating frequency */ - unsigned int fs_clock; - unsigned int hs_clock; - - /* - * HSI2C Controller can operate in - * 1. High speed upto 3.4Mbps - * 2. Fast speed upto 1Mbps - */ - int speed_mode; + unsigned int op_clock; /* Version of HS-I2C Hardware */ struct exynos_hsi2c_variant *variant; @@ -279,7 +269,7 @@ static void exynos5_i2c_clr_pend_irq(struct exynos5_i2c *i2c) * Returns 0 on success, -EINVAL if the cycle length cannot * be calculated. */ -static int exynos5_i2c_set_timing(struct exynos5_i2c *i2c, int mode) +static int exynos5_i2c_set_timing(struct exynos5_i2c *i2c, bool hs_timings) { u32 i2c_timing_s1; u32 i2c_timing_s2; @@ -292,8 +282,9 @@ static int exynos5_i2c_set_timing(struct exynos5_i2c *i2c, int mode) unsigned int t_sr_release; unsigned int t_ftl_cycle; unsigned int clkin = clk_get_rate(i2c->clk); - unsigned int op_clk = (mode == HSI2C_HIGH_SPD) ? - i2c->hs_clock : i2c->fs_clock; + unsigned int op_clk = hs_timings ? i2c->op_clock : + (i2c->op_clock >= HSI2C_HS_TX_CLOCK) ? HSI2C_FS_TX_CLOCK : + i2c->op_clock; int div, clk_cycle, temp; /* @@ -344,7 +335,7 @@ static int exynos5_i2c_set_timing(struct exynos5_i2c *i2c, int mode) div, t_sr_release); dev_dbg(i2c->dev, "tDATA_HD: %X\n", t_data_hd); - if (mode == HSI2C_HIGH_SPD) { + if (hs_timings) { writel(i2c_timing_s1, i2c->regs + HSI2C_TIMING_HS1); writel(i2c_timing_s2, i2c->regs + HSI2C_TIMING_HS2); writel(i2c_timing_s3, i2c->regs + HSI2C_TIMING_HS3); @@ -364,14 +355,14 @@ static int exynos5_hsi2c_clock_setup(struct exynos5_i2c *i2c) * Configure the Fast speed timing values * Even the High Speed mode initially starts with Fast mode */ - if (exynos5_i2c_set_timing(i2c, HSI2C_FAST_SPD)) { + if (exynos5_i2c_set_timing(i2c, false)) { dev_err(i2c->dev, "HSI2C FS Clock set up failed\n"); return -EINVAL; } /* configure the High speed timing values */ - if (i2c->speed_mode == HSI2C_HIGH_SPD) { - if (exynos5_i2c_set_timing(i2c, HSI2C_HIGH_SPD)) { + if (i2c->op_clock >= HSI2C_HS_TX_CLOCK) { + if (exynos5_i2c_set_timing(i2c, true)) { dev_err(i2c->dev, "HSI2C HS Clock set up failed\n"); return -EINVAL; } @@ -397,7 +388,7 @@ static void exynos5_i2c_init(struct exynos5_i2c *i2c) i2c->regs + HSI2C_CTL); writel(HSI2C_TRAILING_COUNT, i2c->regs + HSI2C_TRAILIG_CTL); - if (i2c->speed_mode == HSI2C_HIGH_SPD) { + if (i2c->op_clock >= HSI2C_HS_TX_CLOCK) { writel(HSI2C_MASTER_ID(MASTER_ID(i2c->adap.nr)), i2c->regs + HSI2C_ADDR); i2c_conf |= HSI2C_HS_MODE; @@ -734,26 +725,14 @@ static int exynos5_i2c_probe(struct platform_device *pdev) struct device_node *np = pdev->dev.of_node; struct exynos5_i2c *i2c; struct resource *mem; - unsigned int op_clock; int ret; i2c = devm_kzalloc(&pdev->dev, sizeof(struct exynos5_i2c), GFP_KERNEL); if (!i2c) return -ENOMEM; - if (of_property_read_u32(np, "clock-frequency", &op_clock)) { - i2c->speed_mode = HSI2C_FAST_SPD; - i2c->fs_clock = HSI2C_FS_TX_CLOCK; - } else { - if (op_clock >= HSI2C_HS_TX_CLOCK) { - i2c->speed_mode = HSI2C_HIGH_SPD; - i2c->fs_clock = HSI2C_FS_TX_CLOCK; - i2c->hs_clock = op_clock; - } else { - i2c->speed_mode = HSI2C_FAST_SPD; - i2c->fs_clock = op_clock; - } - } + if (of_property_read_u32(np, "clock-frequency", &i2c->op_clock)) + i2c->op_clock = HSI2C_FS_TX_CLOCK; strlcpy(i2c->adap.name, "exynos5-i2c", sizeof(i2c->adap.name)); i2c->adap.owner = THIS_MODULE; -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html