Re: [PATCH] ARM: dts: Odroid XU4: fix USB3.0 ports

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Richard,

On 24 January 2017 at 19:18, Richard Genoud <richard.genoud@xxxxxxxxx> wrote:
> Since commit 2164a476205ccc ("usb: dwc3: set SUSPHY bit for all cores"),
> the USB ports on odroid-XU4 don't work anymore.
>
> Inserting an usb key (USB2.0) on the USB3.0 port result in:
> [   64.488264] xhci-hcd xhci-hcd.2.auto: Port resume took longer than 20000 msec, port status = 0xc400fe3
> [   74.568156] xhci-hcd xhci-hcd.2.auto: xHCI host not responding to stop endpoint command.
> [   74.574806] xhci-hcd xhci-hcd.2.auto: Assuming host is dying, halting host.
> [   74.601970] xhci-hcd xhci-hcd.2.auto: HC died; cleaning up
> [   74.606276] usb 3-1: USB disconnect, device number 2
> [   74.613565] usb 4-1: USB disconnect, device number 2
> [   74.621208] usb usb3-port1: couldn't allocate usb_device
> NB: it's not related to USB2.0 devices, I get the same result with an USB3.0 device (SATA to USB3 for instance).
> NB2: it doesn't happen on an odriod-XU3 board, that doesn't have the realtek RTL8153 chip.
>
> If the lines:
>         if (dwc->revision > DWC3_REVISION_194A)
>                 reg |= DWC3_GUSB3PIPECTL_SUSPHY;
> are commented out, the USB3.0 start working.
>
> For a full analyse: https://lkml.org/lkml/2017/1/18/678
>
> Felipe suggested that suspend should be disabled temporarily while
> what's wrong with DCW3 is figured out.
>
> Tested on Odroid XU4
>
> Suggested-by: Felipe Balbi <felipe.balbi@xxxxxxxxxxxxxxx>
> Tested-by: Richard Genoud <richard.genoud@xxxxxxxxx>
> Signed-off-by: Richard Genoud <richard.genoud@xxxxxxxxx>
> Cc: stable@xxxxxxxxxxxxxxx # 4.4+
> Fixes: 2164a476205ccc ("usb: dwc3: set SUSPHY bit for all cores")
> ---
>  arch/arm/boot/dts/exynos5422-odroidxu4.dts | 9 +++++++++
>  1 file changed, 9 insertions(+)
>
> diff --git a/arch/arm/boot/dts/exynos5422-odroidxu4.dts b/arch/arm/boot/dts/exynos5422-odroidxu4.dts
> index 2faf88627a48..f62dbd9b5ad3 100644
> --- a/arch/arm/boot/dts/exynos5422-odroidxu4.dts
> +++ b/arch/arm/boot/dts/exynos5422-odroidxu4.dts
> @@ -43,6 +43,15 @@
>         status = "okay";
>  };
>
> +&usbdrd_dwc3_0 {
> +       /*
> +        * without that, usb devices are not recognized when
> +        * they are plugged.
> +        * cf: https://lkml.org/lkml/2017/1/18/678
> +        */
> +       snps,dis_u3_susphy_quirk;
> +};
> +
>  &usbdrd_dwc3_1 {
>         dr_mode = "host";
>  };
> --

Thanks for this patch.
But could you consider moving this changes as below.

https://lkml.org/lkml/2015/3/18/400

Best Regards
-Anand

> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  Powered by Linux