Ah sorry, I didn't look carefully and thought you moved the node from
the U3 to the X DTS. Mea culpa! :(
- Tobias
Markus Reichl wrote:
> Hi Tobias,
>
> Am 24.11.2016 um 15:29 schrieb Tobias Jakobi:
>> Hey Markus,
>>
>> you should probably mention why the node was removed from the U3 dts. I
>> guess this is due to the SPI not being routed anywhere there?
>
> I put the node into exynos4412-odroid-common, so it will be there
> on X, X2 and U3.
> We need it on U3, too, because on U3+ SPI is routed to an external connector.
> (Presently we do not separate between U3 and U3+. They are different only with
> SPI and USB-OTG).
>
> Thanks for looking at,
> --
> Markus
>
>>
>> - Tobias
>>
>> Markus Reichl wrote:
>>> Odroid-X and -X2 have SPI_1 routed to an external connector.
>>> Enable SPI_1 on X and -X2.
>>>
>>> Signed-off-by: Markus Reichl <m.reichl@xxxxxxxxxxxxx>
>>> ---
>>> Tested on X, U3.
>>> ---
>>> arch/arm/boot/dts/exynos4412-odroid-common.dtsi | 8 ++++++++
>>> arch/arm/boot/dts/exynos4412-odroidu3.dts | 7 -------
>>> 2 files changed, 8 insertions(+), 7 deletions(-)
>>>
>>> diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
>>> index 7dc1009..c919405 100644
>>> --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
>>> +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
>>> @@ -559,6 +559,14 @@
>>> status = "okay";
>>> };
>>>
>>> +&spi_1 {
>>> + pinctrl-names = "default";
>>> + pinctrl-0 = <&spi1_bus>;
>>> + num-cs = <1>;
>>> + cs-gpios = <&gpb 5 GPIO_ACTIVE_HIGH>;
>>> + status = "okay";
>>> +};
>>> +
>>> &tmu {
>>> vtmu-supply = <&ldo10_reg>;
>>> status = "okay";
>>> diff --git a/arch/arm/boot/dts/exynos4412-odroidu3.dts b/arch/arm/boot/dts/exynos4412-odroidu3.dts
>>> index fc14da5..4bd215f 100644
>>> --- a/arch/arm/boot/dts/exynos4412-odroidu3.dts
>>> +++ b/arch/arm/boot/dts/exynos4412-odroidu3.dts
>>> @@ -124,10 +124,3 @@
>>> "Speakers", "SPKL",
>>> "Speakers", "SPKR";
>>> };
>>> -
>>> -&spi_1 {
>>> - pinctrl-names = "default";
>>> - pinctrl-0 = <&spi1_bus>;
>>> - cs-gpios = <&gpb 5 GPIO_ACTIVE_HIGH>;
>>> - status = "okay";
>>> -};
>>>
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
>> the body of a message to majordomo@xxxxxxxxxxxxxxx
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
