Re: [PATCH 0/9] ARM: dts: exynos: Use macros for GPIO to make it more readable

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello Krzysztof,

On 08/31/2016 02:13 PM, Krzysztof Kozlowski wrote:
> Hi,
> 
> Example:
> -		samsung,pin-function = <0x2>;
> -		samsung,pin-pud = <0>;
> -		samsung,pin-drv = <0>;
> +		samsung,pin-function = <PIN_FUNC_SPC_2>;
> +		samsung,pin-pud = <PIN_PULL_NONE>;
> +		samsung,pin-drv = <PIN_DRV_LV1>;
>  
> This should be just more readable. Especially for drive strenghts which
> are unobvious and different between some SoCs.
>

I agree that's better to have macros for these instead of using magic numbers.

For all the series:

Reviewed-by: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>

> Tested with dtx_diff:
> for i in dts-old/exynos*dtb; do scripts/dtc/dtx_diff $i dts-new/$(basename $i);  done
>

I've also tested the patches on an Exynos5800 Peach Pi board, and as expected
everything is working correctly since the compiled DTB is exactly the same.

So for patches 1/9 and 9/9:

Tested-by: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>

Best regards,
-- 
Javier Martinez Canillas
Open Source Group
Samsung Research America
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  Powered by Linux