Adding vendor specific directories in phy to group
phy drivers under their respective vendor umbrella.
Signed-off-by: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
---
With growing number of phy drivers, it makes sense to
group these drivers under their respective vendor/platform
umbrella directory.
Build-tested 'multi_v7_defconfig'.
drivers/phy/Kconfig | 386 +---------------------
drivers/phy/Makefile | 57 +---
drivers/phy/bcom/Kconfig | 27 ++
drivers/phy/bcom/Makefile | 3 +
drivers/phy/{ => bcom}/phy-bcm-cygnus-pcie.c | 0
drivers/phy/{ => bcom}/phy-bcm-kona-usb2.c | 0
drivers/phy/{ => bcom}/phy-brcmstb-sata.c | 0
drivers/phy/hisi/Kconfig | 20 ++
drivers/phy/hisi/Makefile | 2 +
drivers/phy/{ => hisi}/phy-hi6220-usb.c | 0
drivers/phy/{ => hisi}/phy-hix5hd2-sata.c | 0
drivers/phy/marvell/Kconfig | 50 +++
drivers/phy/marvell/Makefile | 6 +
drivers/phy/{ => marvell}/phy-armada375-usb2.c | 0
drivers/phy/{ => marvell}/phy-berlin-sata.c | 0
drivers/phy/{ => marvell}/phy-berlin-usb.c | 0
drivers/phy/{ => marvell}/phy-mvebu-sata.c | 0
drivers/phy/{ => marvell}/phy-pxa-28nm-hsic.c | 0
drivers/phy/{ => marvell}/phy-pxa-28nm-usb2.c | 0
drivers/phy/qcom/Kconfig | 23 ++
drivers/phy/qcom/Makefile | 5 +
drivers/phy/{ => qcom}/phy-qcom-apq8064-sata.c | 0
drivers/phy/{ => qcom}/phy-qcom-ipq806x-sata.c | 0
drivers/phy/{ => qcom}/phy-qcom-ufs-i.h | 0
drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-14nm.c | 0
drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-14nm.h | 0
drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-20nm.c | 0
drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-20nm.h | 0
drivers/phy/{ => qcom}/phy-qcom-ufs.c | 0
drivers/phy/rcar/Kconfig | 16 +
drivers/phy/rcar/Makefile | 2 +
drivers/phy/{ => rcar}/phy-rcar-gen2.c | 0
drivers/phy/{ => rcar}/phy-rcar-gen3-usb2.c | 0
drivers/phy/rockchip/Kconfig | 23 ++
drivers/phy/rockchip/Makefile | 3 +
drivers/phy/{ => rockchip}/phy-rockchip-dp.c | 0
drivers/phy/{ => rockchip}/phy-rockchip-emmc.c | 0
drivers/phy/{ => rockchip}/phy-rockchip-usb.c | 0
drivers/phy/samsung/Kconfig | 87 +++++
drivers/phy/samsung/Makefile | 10 +
drivers/phy/{ => samsung}/phy-exynos-dp-video.c | 0
drivers/phy/{ => samsung}/phy-exynos-mipi-video.c | 0
drivers/phy/{ => samsung}/phy-exynos4210-usb2.c | 0
drivers/phy/{ => samsung}/phy-exynos4x12-usb2.c | 0
drivers/phy/{ => samsung}/phy-exynos5-usbdrd.c | 0
drivers/phy/{ => samsung}/phy-exynos5250-sata.c | 0
drivers/phy/{ => samsung}/phy-exynos5250-usb2.c | 0
drivers/phy/{ => samsung}/phy-s5pv210-usb2.c | 0
drivers/phy/{ => samsung}/phy-samsung-usb2.c | 0
drivers/phy/{ => samsung}/phy-samsung-usb2.h | 0
drivers/phy/st/Kconfig | 51 +++
drivers/phy/st/Makefile | 6 +
drivers/phy/{ => st}/phy-miphy28lp.c | 0
drivers/phy/{ => st}/phy-miphy365x.c | 0
drivers/phy/{ => st}/phy-spear1310-miphy.c | 0
drivers/phy/{ => st}/phy-spear1340-miphy.c | 0
drivers/phy/{ => st}/phy-stih407-usb.c | 0
drivers/phy/{ => st}/phy-stih41x-usb.c | 0
drivers/phy/sunxi/Kconfig | 28 ++
drivers/phy/sunxi/Makefile | 2 +
drivers/phy/{ => sunxi}/phy-sun4i-usb.c | 0
drivers/phy/{ => sunxi}/phy-sun9i-usb.c | 0
drivers/phy/ti/Kconfig | 67 ++++
drivers/phy/ti/Makefile | 6 +
drivers/phy/{ => ti}/phy-dm816x-usb.c | 0
drivers/phy/{ => ti}/phy-omap-control.c | 0
drivers/phy/{ => ti}/phy-omap-usb2.c | 0
drivers/phy/{ => ti}/phy-ti-pipe3.c | 0
drivers/phy/{ => ti}/phy-tusb1210.c | 0
drivers/phy/{ => ti}/phy-twl4030-usb.c | 0
drivers/phy/{ => ti}/ulpi_phy.h | 0
71 files changed, 464 insertions(+), 416 deletions(-)
create mode 100644 drivers/phy/bcom/Kconfig
create mode 100644 drivers/phy/bcom/Makefile
rename drivers/phy/{ => bcom}/phy-bcm-cygnus-pcie.c (100%)
rename drivers/phy/{ => bcom}/phy-bcm-kona-usb2.c (100%)
rename drivers/phy/{ => bcom}/phy-brcmstb-sata.c (100%)
create mode 100644 drivers/phy/hisi/Kconfig
create mode 100644 drivers/phy/hisi/Makefile
rename drivers/phy/{ => hisi}/phy-hi6220-usb.c (100%)
rename drivers/phy/{ => hisi}/phy-hix5hd2-sata.c (100%)
create mode 100644 drivers/phy/marvell/Kconfig
create mode 100644 drivers/phy/marvell/Makefile
rename drivers/phy/{ => marvell}/phy-armada375-usb2.c (100%)
rename drivers/phy/{ => marvell}/phy-berlin-sata.c (100%)
rename drivers/phy/{ => marvell}/phy-berlin-usb.c (100%)
rename drivers/phy/{ => marvell}/phy-mvebu-sata.c (100%)
rename drivers/phy/{ => marvell}/phy-pxa-28nm-hsic.c (100%)
rename drivers/phy/{ => marvell}/phy-pxa-28nm-usb2.c (100%)
create mode 100644 drivers/phy/qcom/Kconfig
create mode 100644 drivers/phy/qcom/Makefile
rename drivers/phy/{ => qcom}/phy-qcom-apq8064-sata.c (100%)
rename drivers/phy/{ => qcom}/phy-qcom-ipq806x-sata.c (100%)
rename drivers/phy/{ => qcom}/phy-qcom-ufs-i.h (100%)
rename drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-14nm.c (100%)
rename drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-14nm.h (100%)
rename drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-20nm.c (100%)
rename drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-20nm.h (100%)
rename drivers/phy/{ => qcom}/phy-qcom-ufs.c (100%)
create mode 100644 drivers/phy/rcar/Kconfig
create mode 100644 drivers/phy/rcar/Makefile
rename drivers/phy/{ => rcar}/phy-rcar-gen2.c (100%)
rename drivers/phy/{ => rcar}/phy-rcar-gen3-usb2.c (100%)
create mode 100644 drivers/phy/rockchip/Kconfig
create mode 100644 drivers/phy/rockchip/Makefile
rename drivers/phy/{ => rockchip}/phy-rockchip-dp.c (100%)
rename drivers/phy/{ => rockchip}/phy-rockchip-emmc.c (100%)
rename drivers/phy/{ => rockchip}/phy-rockchip-usb.c (100%)
create mode 100644 drivers/phy/samsung/Kconfig
create mode 100644 drivers/phy/samsung/Makefile
rename drivers/phy/{ => samsung}/phy-exynos-dp-video.c (100%)
rename drivers/phy/{ => samsung}/phy-exynos-mipi-video.c (100%)
rename drivers/phy/{ => samsung}/phy-exynos4210-usb2.c (100%)
rename drivers/phy/{ => samsung}/phy-exynos4x12-usb2.c (100%)
rename drivers/phy/{ => samsung}/phy-exynos5-usbdrd.c (100%)
rename drivers/phy/{ => samsung}/phy-exynos5250-sata.c (100%)
rename drivers/phy/{ => samsung}/phy-exynos5250-usb2.c (100%)
rename drivers/phy/{ => samsung}/phy-s5pv210-usb2.c (100%)
rename drivers/phy/{ => samsung}/phy-samsung-usb2.c (100%)
rename drivers/phy/{ => samsung}/phy-samsung-usb2.h (100%)
create mode 100644 drivers/phy/st/Kconfig
create mode 100644 drivers/phy/st/Makefile
rename drivers/phy/{ => st}/phy-miphy28lp.c (100%)
rename drivers/phy/{ => st}/phy-miphy365x.c (100%)
rename drivers/phy/{ => st}/phy-spear1310-miphy.c (100%)
rename drivers/phy/{ => st}/phy-spear1340-miphy.c (100%)
rename drivers/phy/{ => st}/phy-stih407-usb.c (100%)
rename drivers/phy/{ => st}/phy-stih41x-usb.c (100%)
create mode 100644 drivers/phy/sunxi/Kconfig
create mode 100644 drivers/phy/sunxi/Makefile
rename drivers/phy/{ => sunxi}/phy-sun4i-usb.c (100%)
rename drivers/phy/{ => sunxi}/phy-sun9i-usb.c (100%)
create mode 100644 drivers/phy/ti/Kconfig
create mode 100644 drivers/phy/ti/Makefile
rename drivers/phy/{ => ti}/phy-dm816x-usb.c (100%)
rename drivers/phy/{ => ti}/phy-omap-control.c (100%)
rename drivers/phy/{ => ti}/phy-omap-usb2.c (100%)
rename drivers/phy/{ => ti}/phy-ti-pipe3.c (100%)
rename drivers/phy/{ => ti}/phy-tusb1210.c (100%)
rename drivers/phy/{ => ti}/phy-twl4030-usb.c (100%)
rename drivers/phy/{ => ti}/ulpi_phy.h (100%)
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 26566db..80c8c68 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -15,45 +15,6 @@ config GENERIC_PHY
phy users can obtain reference to the PHY. All the users of this
framework should select this config.
-config PHY_BERLIN_USB
- tristate "Marvell Berlin USB PHY Driver"
- depends on ARCH_BERLIN && RESET_CONTROLLER && HAS_IOMEM && OF
- select GENERIC_PHY
- help
- Enable this to support the USB PHY on Marvell Berlin SoCs.
-
-config PHY_BERLIN_SATA
- tristate "Marvell Berlin SATA PHY driver"
- depends on ARCH_BERLIN && HAS_IOMEM && OF
- select GENERIC_PHY
- help
- Enable this to support the SATA PHY on Marvell Berlin SoCs.
-
-config ARMADA375_USBCLUSTER_PHY
- def_bool y
- depends on MACH_ARMADA_375 || COMPILE_TEST
- depends on OF && HAS_IOMEM
- select GENERIC_PHY
-
-config PHY_DM816X_USB
- tristate "TI dm816x USB PHY driver"
- depends on ARCH_OMAP2PLUS
- depends on USB_SUPPORT
- select GENERIC_PHY
- select USB_PHY
- help
- Enable this for dm816x USB to work.
-
-config PHY_EXYNOS_MIPI_VIDEO
- tristate "S5P/EXYNOS SoC series MIPI CSI-2/DSI PHY driver"
- depends on HAS_IOMEM
- depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
- select GENERIC_PHY
- default y if ARCH_S5PV210 || ARCH_EXYNOS
- help
- Support for MIPI CSI-2 and MIPI DSI DPHY found on Samsung S5P
- and EXYNOS SoCs.
-
config PHY_LPC18XX_USB_OTG
tristate "NXP LPC18xx/43xx SoC USB OTG PHY driver"
depends on OF && (ARCH_LPC18XX || COMPILE_TEST)
@@ -65,154 +26,6 @@ config PHY_LPC18XX_USB_OTG
This driver is need for USB0 support on LPC18xx/43xx and takes
care of enabling and clock setup.
-config PHY_PXA_28NM_HSIC
- tristate "Marvell USB HSIC 28nm PHY Driver"
- depends on HAS_IOMEM
- select GENERIC_PHY
- help
- Enable this to support Marvell USB HSIC PHY driver for Marvell
- SoC. This driver will do the PHY initialization and shutdown.
- The PHY driver will be used by Marvell ehci driver.
-
- To compile this driver as a module, choose M here.
-
-config PHY_PXA_28NM_USB2
- tristate "Marvell USB 2.0 28nm PHY Driver"
- depends on HAS_IOMEM
- select GENERIC_PHY
- help
- Enable this to support Marvell USB 2.0 PHY driver for Marvell
- SoC. This driver will do the PHY initialization and shutdown.
- The PHY driver will be used by Marvell udc/ehci/otg driver.
-
- To compile this driver as a module, choose M here.
-
-config PHY_MVEBU_SATA
- def_bool y
- depends on ARCH_DOVE || MACH_DOVE || MACH_KIRKWOOD
- depends on OF
- select GENERIC_PHY
-
-config PHY_MIPHY28LP
- tristate "STMicroelectronics MIPHY28LP PHY driver for STiH407"
- depends on ARCH_STI
- select GENERIC_PHY
- help
- Enable this to support the miphy transceiver (for SATA/PCIE/USB3)
- that is part of STMicroelectronics STiH407 SoC.
-
-config PHY_MIPHY365X
- tristate "STMicroelectronics MIPHY365X PHY driver for STiH41x series"
- depends on ARCH_STI
- depends on HAS_IOMEM
- depends on OF
- select GENERIC_PHY
- help
- Enable this to support the miphy transceiver (for SATA/PCIE)
- that is part of STMicroelectronics STiH41x SoC series.
-
-config PHY_RCAR_GEN2
- tristate "Renesas R-Car generation 2 USB PHY driver"
- depends on ARCH_SHMOBILE
- depends on GENERIC_PHY
- help
- Support for USB PHY found on Renesas R-Car generation 2 SoCs.
-
-config PHY_RCAR_GEN3_USB2
- tristate "Renesas R-Car generation 3 USB 2.0 PHY driver"
- depends on OF && ARCH_SHMOBILE
- select GENERIC_PHY
- help
- Support for USB 2.0 PHY found on Renesas R-Car generation 3 SoCs.
-
-config OMAP_CONTROL_PHY
- tristate "OMAP CONTROL PHY Driver"
- depends on ARCH_OMAP2PLUS || COMPILE_TEST
- help
- Enable this to add support for the PHY part present in the control
- module. This driver has API to power on the USB2 PHY and to write to
- the mailbox. The mailbox is present only in omap4 and the register to
- power on the USB2 PHY is present in OMAP4 and OMAP5. OMAP5 has an
- additional register to power on USB3 PHY/SATA PHY/PCIE PHY
- (PIPE3 PHY).
-
-config OMAP_USB2
- tristate "OMAP USB2 PHY Driver"
- depends on ARCH_OMAP2PLUS
- depends on USB_SUPPORT
- select GENERIC_PHY
- select USB_PHY
- select OMAP_CONTROL_PHY
- depends on OMAP_OCP2SCP
- help
- Enable this to support the transceiver that is part of SOC. This
- driver takes care of all the PHY functionality apart from comparator.
- The USB OTG controller communicates with the comparator using this
- driver.
-
-config TI_PIPE3
- tristate "TI PIPE3 PHY Driver"
- depends on ARCH_OMAP2PLUS || COMPILE_TEST
- select GENERIC_PHY
- select OMAP_CONTROL_PHY
- depends on OMAP_OCP2SCP
- help
- Enable this to support the PIPE3 PHY that is part of TI SOCs. This
- driver takes care of all the PHY functionality apart from comparator.
- This driver interacts with the "OMAP Control PHY Driver" to power
- on/off the PHY.
-
-config TWL4030_USB
- tristate "TWL4030 USB Transceiver Driver"
- depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS
- depends on USB_SUPPORT
- select GENERIC_PHY
- select USB_PHY
- help
- Enable this to support the USB OTG transceiver on TWL4030
- family chips (including the TWL5030 and TPS659x0 devices).
- This transceiver supports high and full speed devices plus,
- in host mode, low speed.
-
-config PHY_EXYNOS_DP_VIDEO
- tristate "EXYNOS SoC series Display Port PHY driver"
- depends on OF
- depends on ARCH_EXYNOS || COMPILE_TEST
- default ARCH_EXYNOS
- select GENERIC_PHY
- help
- Support for Display Port PHY found on Samsung EXYNOS SoCs.
-
-config BCM_KONA_USB2_PHY
- tristate "Broadcom Kona USB2 PHY Driver"
- depends on HAS_IOMEM
- select GENERIC_PHY
- help
- Enable this to support the Broadcom Kona USB 2.0 PHY.
-
-config PHY_EXYNOS5250_SATA
- tristate "Exynos5250 Sata SerDes/PHY driver"
- depends on SOC_EXYNOS5250
- depends on HAS_IOMEM
- depends on OF
- select GENERIC_PHY
- select I2C
- select I2C_S3C2410
- select MFD_SYSCON
- help
- Enable this to support SATA SerDes/Phy found on Samsung's
- Exynos5250 based SoCs.This SerDes/Phy supports SATA 1.5 Gb/s,
- SATA 3.0 Gb/s, SATA 6.0 Gb/s speeds. It supports one SATA host
- port to accept one SATA device.
-
-config PHY_HIX5HD2_SATA
- tristate "HIX5HD2 SATA PHY Driver"
- depends on ARCH_HIX5HD2 && OF && HAS_IOMEM
- select GENERIC_PHY
- select MFD_SYSCON
- help
- Support for SATA PHY on Hisilicon hix5hd2 Soc.
-
config PHY_MT65XX_USB3
tristate "Mediatek USB3.0 PHY Driver"
depends on ARCH_MEDIATEK && OF
@@ -222,93 +35,6 @@ config PHY_MT65XX_USB3
for mt65xx SoCs. it supports two usb2.0 ports and
one usb3.0 port.
-config PHY_HI6220_USB
- tristate "hi6220 USB PHY support"
- depends on (ARCH_HISI && ARM64) || COMPILE_TEST
- select GENERIC_PHY
- select MFD_SYSCON
- help
- Enable this to support the HISILICON HI6220 USB PHY.
-
- To compile this driver as a module, choose M here.
-
-config PHY_SUN4I_USB
- tristate "Allwinner sunxi SoC USB PHY driver"
- depends on ARCH_SUNXI && HAS_IOMEM && OF
- depends on RESET_CONTROLLER
- depends on EXTCON
- depends on POWER_SUPPLY
- select GENERIC_PHY
- help
- Enable this to support the transceiver that is part of Allwinner
- sunxi SoCs.
-
- This driver controls the entire USB PHY block, both the USB OTG
- parts, as well as the 2 regular USB 2 host PHYs.
-
-config PHY_SUN9I_USB
- tristate "Allwinner sun9i SoC USB PHY driver"
- depends on ARCH_SUNXI && HAS_IOMEM && OF
- depends on RESET_CONTROLLER
- depends on USB_COMMON
- select GENERIC_PHY
- help
- Enable this to support the transceiver that is part of Allwinner
- sun9i SoCs.
-
- This driver controls each individual USB 2 host PHY.
-
-config PHY_SAMSUNG_USB2
- tristate "Samsung USB 2.0 PHY driver"
- depends on HAS_IOMEM
- depends on USB_EHCI_EXYNOS || USB_OHCI_EXYNOS || USB_DWC2
- select GENERIC_PHY
- select MFD_SYSCON
- default ARCH_EXYNOS
- help
- Enable this to support the Samsung USB 2.0 PHY driver for Samsung
- SoCs. This driver provides the interface for USB 2.0 PHY. Support
- for particular PHYs will be enabled based on the SoC type in addition
- to this driver.
-
-config PHY_S5PV210_USB2
- bool "Support for S5PV210"
- depends on PHY_SAMSUNG_USB2
- depends on ARCH_S5PV210
- help
- Enable USB PHY support for S5PV210. This option requires that Samsung
- USB 2.0 PHY driver is enabled and means that support for this
- particular SoC is compiled in the driver. In case of S5PV210 two phys
- are available - device and host.
-
-config PHY_EXYNOS4210_USB2
- bool
- depends on PHY_SAMSUNG_USB2
- default CPU_EXYNOS4210
-
-config PHY_EXYNOS4X12_USB2
- bool
- depends on PHY_SAMSUNG_USB2
- default SOC_EXYNOS3250 || SOC_EXYNOS4212 || SOC_EXYNOS4412
-
-config PHY_EXYNOS5250_USB2
- bool
- depends on PHY_SAMSUNG_USB2
- default SOC_EXYNOS5250 || SOC_EXYNOS5420
-
-config PHY_EXYNOS5_USBDRD
- tristate "Exynos5 SoC series USB DRD PHY driver"
- depends on ARCH_EXYNOS && OF
- depends on HAS_IOMEM
- depends on USB_DWC3_EXYNOS
- select GENERIC_PHY
- select MFD_SYSCON
- default y
- help
- Enable USB DRD PHY support for Exynos 5 SoC series.
- This driver provides PHY interface for USB 3.0 DRD controller
- present on Exynos5 SoC series.
-
config PHY_PISTACHIO_USB
tristate "IMG Pistachio USB2.0 PHY driver"
depends on MACH_PISTACHIO
@@ -316,55 +42,6 @@ config PHY_PISTACHIO_USB
help
Enable this to support the USB2.0 PHY on the IMG Pistachio SoC.
-config PHY_QCOM_APQ8064_SATA
- tristate "Qualcomm APQ8064 SATA SerDes/PHY driver"
- depends on ARCH_QCOM
- depends on HAS_IOMEM
- depends on OF
- select GENERIC_PHY
-
-config PHY_QCOM_IPQ806X_SATA
- tristate "Qualcomm IPQ806x SATA SerDes/PHY driver"
- depends on ARCH_QCOM
- depends on HAS_IOMEM
- depends on OF
- select GENERIC_PHY
-
-config PHY_ROCKCHIP_USB
- tristate "Rockchip USB2 PHY Driver"
- depends on ARCH_ROCKCHIP && OF
- select GENERIC_PHY
- help
- Enable this to support the Rockchip USB 2.0 PHY.
-
-config PHY_ROCKCHIP_EMMC
- tristate "Rockchip EMMC PHY Driver"
- depends on ARCH_ROCKCHIP && OF
- select GENERIC_PHY
- help
- Enable this to support the Rockchip EMMC PHY.
-
-config PHY_ROCKCHIP_DP
- tristate "Rockchip Display Port PHY Driver"
- depends on ARCH_ROCKCHIP && OF
- select GENERIC_PHY
- help
- Enable this to support the Rockchip Display Port PHY.
-
-config PHY_ST_SPEAR1310_MIPHY
- tristate "ST SPEAR1310-MIPHY driver"
- select GENERIC_PHY
- depends on MACH_SPEAR1310 || COMPILE_TEST
- help
- Support for ST SPEAr1310 MIPHY which can be used for PCIe and SATA.
-
-config PHY_ST_SPEAR1340_MIPHY
- tristate "ST SPEAR1340-MIPHY driver"
- select GENERIC_PHY
- depends on MACH_SPEAR1340 || COMPILE_TEST
- help
- Support for ST SPEAr1340 MIPHY which can be used for PCIe and SATA.
-
config PHY_XGENE
tristate "APM X-Gene 15Gbps PHY support"
depends on HAS_IOMEM && OF && (ARM64 || COMPILE_TEST)
@@ -372,53 +49,20 @@ config PHY_XGENE
help
This option enables support for APM X-Gene SoC multi-purpose PHY.
-config PHY_STIH407_USB
- tristate "STMicroelectronics USB2 picoPHY driver for STiH407 family"
- depends on RESET_CONTROLLER
- depends on ARCH_STI || COMPILE_TEST
- select GENERIC_PHY
- help
- Enable this support to enable the picoPHY device used by USB2
- and USB3 controllers on STMicroelectronics STiH407 SoC families.
-
-config PHY_STIH41X_USB
- tristate "STMicroelectronics USB2 PHY driver for STiH41x series"
- depends on ARCH_STI
- select GENERIC_PHY
- help
- Enable this to support the USB transceiver that is part of
- STMicroelectronics STiH41x SoC series.
-
-config PHY_QCOM_UFS
- tristate "Qualcomm UFS PHY driver"
- depends on OF && ARCH_QCOM
- select GENERIC_PHY
- help
- Support for UFS PHY on QCOM chipsets.
-
-config PHY_TUSB1210
- tristate "TI TUSB1210 ULPI PHY module"
- depends on USB_ULPI_BUS
- select GENERIC_PHY
- help
- Support for TI TUSB1210 USB ULPI PHY.
-
-config PHY_BRCMSTB_SATA
- tristate "Broadcom STB SATA PHY driver"
- depends on ARCH_BRCMSTB || BMIPS_GENERIC
- depends on OF
- select GENERIC_PHY
- help
- Enable this to support the SATA3 PHY on 28nm or 40nm Broadcom STB SoCs.
- Likely useful only with CONFIG_SATA_BRCMSTB enabled.
-
-config PHY_CYGNUS_PCIE
- tristate "Broadcom Cygnus PCIe PHY driver"
- depends on OF && (ARCH_BCM_CYGNUS || COMPILE_TEST)
- select GENERIC_PHY
- default ARCH_BCM_CYGNUS
- help
- Enable this to support the Broadcom Cygnus PCIe PHY.
- If unsure, say N.
+menuconfig PHY_PLAT
+ bool "Platform Phy drivers"
+
+if PHY_PLAT
+source "drivers/phy/bcom/Kconfig"
+source "drivers/phy/hisi/Kconfig"
+source "drivers/phy/marvell/Kconfig"
+source "drivers/phy/qcom/Kconfig"
+source "drivers/phy/rcar/Kconfig"
+source "drivers/phy/rockchip/Kconfig"
+source "drivers/phy/samsung/Kconfig"
+source "drivers/phy/st/Kconfig"
+source "drivers/phy/sunxi/Kconfig"
+source "drivers/phy/ti/Kconfig"
+endif
endmenu
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index 24596a9..73d563b 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -3,52 +3,19 @@
#
obj-$(CONFIG_GENERIC_PHY) += phy-core.o
-obj-$(CONFIG_PHY_BERLIN_USB) += phy-berlin-usb.o
-obj-$(CONFIG_PHY_BERLIN_SATA) += phy-berlin-sata.o
-obj-$(CONFIG_PHY_DM816X_USB) += phy-dm816x-usb.o
-obj-$(CONFIG_ARMADA375_USBCLUSTER_PHY) += phy-armada375-usb2.o
-obj-$(CONFIG_BCM_KONA_USB2_PHY) += phy-bcm-kona-usb2.o
-obj-$(CONFIG_PHY_EXYNOS_DP_VIDEO) += phy-exynos-dp-video.o
-obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO) += phy-exynos-mipi-video.o
obj-$(CONFIG_PHY_LPC18XX_USB_OTG) += phy-lpc18xx-usb-otg.o
-obj-$(CONFIG_PHY_PXA_28NM_USB2) += phy-pxa-28nm-usb2.o
-obj-$(CONFIG_PHY_PXA_28NM_HSIC) += phy-pxa-28nm-hsic.o
-obj-$(CONFIG_PHY_MVEBU_SATA) += phy-mvebu-sata.o
-obj-$(CONFIG_PHY_MIPHY28LP) += phy-miphy28lp.o
-obj-$(CONFIG_PHY_MIPHY365X) += phy-miphy365x.o
-obj-$(CONFIG_PHY_RCAR_GEN2) += phy-rcar-gen2.o
-obj-$(CONFIG_PHY_RCAR_GEN3_USB2) += phy-rcar-gen3-usb2.o
-obj-$(CONFIG_OMAP_CONTROL_PHY) += phy-omap-control.o
-obj-$(CONFIG_OMAP_USB2) += phy-omap-usb2.o
-obj-$(CONFIG_TI_PIPE3) += phy-ti-pipe3.o
-obj-$(CONFIG_TWL4030_USB) += phy-twl4030-usb.o
-obj-$(CONFIG_PHY_EXYNOS5250_SATA) += phy-exynos5250-sata.o
-obj-$(CONFIG_PHY_HIX5HD2_SATA) += phy-hix5hd2-sata.o
-obj-$(CONFIG_PHY_HI6220_USB) += phy-hi6220-usb.o
obj-$(CONFIG_PHY_MT65XX_USB3) += phy-mt65xx-usb3.o
-obj-$(CONFIG_PHY_SUN4I_USB) += phy-sun4i-usb.o
-obj-$(CONFIG_PHY_SUN9I_USB) += phy-sun9i-usb.o
-obj-$(CONFIG_PHY_SAMSUNG_USB2) += phy-exynos-usb2.o
-phy-exynos-usb2-y += phy-samsung-usb2.o
-phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4210_USB2) += phy-exynos4210-usb2.o
-phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4X12_USB2) += phy-exynos4x12-usb2.o
-phy-exynos-usb2-$(CONFIG_PHY_EXYNOS5250_USB2) += phy-exynos5250-usb2.o
-phy-exynos-usb2-$(CONFIG_PHY_S5PV210_USB2) += phy-s5pv210-usb2.o
-obj-$(CONFIG_PHY_EXYNOS5_USBDRD) += phy-exynos5-usbdrd.o
-obj-$(CONFIG_PHY_QCOM_APQ8064_SATA) += phy-qcom-apq8064-sata.o
-obj-$(CONFIG_PHY_ROCKCHIP_USB) += phy-rockchip-usb.o
-obj-$(CONFIG_PHY_ROCKCHIP_EMMC) += phy-rockchip-emmc.o
-obj-$(CONFIG_PHY_ROCKCHIP_DP) += phy-rockchip-dp.o
-obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA) += phy-qcom-ipq806x-sata.o
-obj-$(CONFIG_PHY_ST_SPEAR1310_MIPHY) += phy-spear1310-miphy.o
-obj-$(CONFIG_PHY_ST_SPEAR1340_MIPHY) += phy-spear1340-miphy.o
obj-$(CONFIG_PHY_XGENE) += phy-xgene.o
-obj-$(CONFIG_PHY_STIH407_USB) += phy-stih407-usb.o
-obj-$(CONFIG_PHY_STIH41X_USB) += phy-stih41x-usb.o
-obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs.o
-obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs-qmp-20nm.o
-obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs-qmp-14nm.o
-obj-$(CONFIG_PHY_TUSB1210) += phy-tusb1210.o
-obj-$(CONFIG_PHY_BRCMSTB_SATA) += phy-brcmstb-sata.o
obj-$(CONFIG_PHY_PISTACHIO_USB) += phy-pistachio-usb.o
-obj-$(CONFIG_PHY_CYGNUS_PCIE) += phy-bcm-cygnus-pcie.o
+
+# Phy drivers for different platforms.
+obj-$(CONFIG_PHY_PLAT) += bcom/ \
+ hisi/ \
+ marvell/ \
+ qcom/ \
+ rcar/ \
+ rockchip/ \
+ samsung/ \
+ st/ \
+ sunxi/ \
+ ti/
diff --git a/drivers/phy/bcom/Kconfig b/drivers/phy/bcom/Kconfig
new file mode 100644
index 0000000..8243372
--- /dev/null
+++ b/drivers/phy/bcom/Kconfig
@@ -0,0 +1,27 @@
+#
+# PHY drivers for Broadcom platforms
+#
+config PHY_CYGNUS_PCIE
+ tristate "Broadcom Cygnus PCIe PHY driver"
+ depends on OF && (ARCH_BCM_CYGNUS || COMPILE_TEST)
+ select GENERIC_PHY
+ default ARCH_BCM_CYGNUS
+ help
+ Enable this to support the Broadcom Cygnus PCIe PHY.
+ If unsure, say N.
+
+config BCM_KONA_USB2_PHY
+ tristate "Broadcom Kona USB2 PHY Driver"
+ depends on HAS_IOMEM
+ select GENERIC_PHY
+ help
+ Enable this to support the Broadcom Kona USB 2.0 PHY.
+
+config PHY_BRCMSTB_SATA
+ tristate "Broadcom STB SATA PHY driver"
+ depends on ARCH_BRCMSTB || BMIPS_GENERIC
+ depends on OF
+ select GENERIC_PHY
+ help
+ Enable this to support the SATA3 PHY on 28nm or 40nm Broadcom STB SoCs.
+ Likely useful only with CONFIG_SATA_BRCMSTB enabled.
diff --git a/drivers/phy/bcom/Makefile b/drivers/phy/bcom/Makefile
new file mode 100644
index 0000000..f30fa76
--- /dev/null
+++ b/drivers/phy/bcom/Makefile
@@ -0,0 +1,3 @@
+obj-$(CONFIG_PHY_CYGNUS_PCIE) += phy-bcm-cygnus-pcie.o
+obj-$(CONFIG_BCM_KONA_USB2_PHY) += phy-bcm-kona-usb2.o
+obj-$(CONFIG_PHY_BRCMSTB_SATA) += phy-brcmstb-sata.o
diff --git a/drivers/phy/phy-bcm-cygnus-pcie.c b/drivers/phy/bcom/phy-bcm-cygnus-pcie.c
similarity index 100%
rename from drivers/phy/phy-bcm-cygnus-pcie.c
rename to drivers/phy/bcom/phy-bcm-cygnus-pcie.c
diff --git a/drivers/phy/phy-bcm-kona-usb2.c b/drivers/phy/bcom/phy-bcm-kona-usb2.c
similarity index 100%
rename from drivers/phy/phy-bcm-kona-usb2.c
rename to drivers/phy/bcom/phy-bcm-kona-usb2.c
diff --git a/drivers/phy/phy-brcmstb-sata.c b/drivers/phy/bcom/phy-brcmstb-sata.c
similarity index 100%
rename from drivers/phy/phy-brcmstb-sata.c
rename to drivers/phy/bcom/phy-brcmstb-sata.c
diff --git a/drivers/phy/hisi/Kconfig b/drivers/phy/hisi/Kconfig
new file mode 100644
index 0000000..affa9ed
--- /dev/null
+++ b/drivers/phy/hisi/Kconfig
@@ -0,0 +1,20 @@
+#
+# PHY drivers for HiSilicon platforms
+#
+config PHY_HIX5HD2_SATA
+ tristate "HIX5HD2 SATA PHY Driver"
+ depends on ARCH_HIX5HD2 && OF && HAS_IOMEM
+ select GENERIC_PHY
+ select MFD_SYSCON
+ help
+ Support for SATA PHY on Hisilicon hix5hd2 Soc.
+
+config PHY_HI6220_USB
+ tristate "hi6220 USB PHY support"
+ depends on (ARCH_HISI && ARM64) || COMPILE_TEST
+ select GENERIC_PHY
+ select MFD_SYSCON
+ help
+ Enable this to support the HISILICON HI6220 USB PHY.
+
+ To compile this driver as a module, choose M here.
diff --git a/drivers/phy/hisi/Makefile b/drivers/phy/hisi/Makefile
new file mode 100644
index 0000000..6059ed8
--- /dev/null
+++ b/drivers/phy/hisi/Makefile
@@ -0,0 +1,2 @@
+obj-$(CONFIG_PHY_HIX5HD2_SATA) += phy-hix5hd2-sata.o
+obj-$(CONFIG_PHY_HI6220_USB) += phy-hi6220-usb.o
diff --git a/drivers/phy/phy-hi6220-usb.c b/drivers/phy/hisi/phy-hi6220-usb.c
similarity index 100%
rename from drivers/phy/phy-hi6220-usb.c
rename to drivers/phy/hisi/phy-hi6220-usb.c
diff --git a/drivers/phy/phy-hix5hd2-sata.c b/drivers/phy/hisi/phy-hix5hd2-sata.c
similarity index 100%
rename from drivers/phy/phy-hix5hd2-sata.c
rename to drivers/phy/hisi/phy-hix5hd2-sata.c
diff --git a/drivers/phy/marvell/Kconfig b/drivers/phy/marvell/Kconfig
new file mode 100644
index 0000000..6c1576c
--- /dev/null
+++ b/drivers/phy/marvell/Kconfig
@@ -0,0 +1,50 @@
+#
+# PHY drivers for Marvell platforms
+#
+config ARMADA375_USBCLUSTER_PHY
+ def_bool y
+ depends on MACH_ARMADA_375 || COMPILE_TEST
+ depends on OF && HAS_IOMEM
+ select GENERIC_PHY
+
+config PHY_BERLIN_USB
+ tristate "Marvell Berlin USB PHY Driver"
+ depends on ARCH_BERLIN && RESET_CONTROLLER && HAS_IOMEM && OF
+ select GENERIC_PHY
+ help
+ Enable this to support the USB PHY on Marvell Berlin SoCs.
+
+config PHY_BERLIN_SATA
+ tristate "Marvell Berlin SATA PHY driver"
+ depends on ARCH_BERLIN && HAS_IOMEM && OF
+ select GENERIC_PHY
+ help
+ Enable this to support the SATA PHY on Marvell Berlin SoCs.
+
+config PHY_MVEBU_SATA
+ def_bool y
+ depends on ARCH_DOVE || MACH_DOVE || MACH_KIRKWOOD
+ depends on OF
+ select GENERIC_PHY
+
+config PHY_PXA_28NM_HSIC
+ tristate "Marvell USB HSIC 28nm PHY Driver"
+ depends on HAS_IOMEM
+ select GENERIC_PHY
+ help
+ Enable this to support Marvell USB HSIC PHY driver for Marvell
+ SoC. This driver will do the PHY initialization and shutdown.
+ The PHY driver will be used by Marvell ehci driver.
+
+ To compile this driver as a module, choose M here.
+
+config PHY_PXA_28NM_USB2
+ tristate "Marvell USB 2.0 28nm PHY Driver"
+ depends on HAS_IOMEM
+ select GENERIC_PHY
+ help
+ Enable this to support Marvell USB 2.0 PHY driver for Marvell
+ SoC. This driver will do the PHY initialization and shutdown.
+ The PHY driver will be used by Marvell udc/ehci/otg driver.
+
+ To compile this driver as a module, choose M here.
diff --git a/drivers/phy/marvell/Makefile b/drivers/phy/marvell/Makefile
new file mode 100644
index 0000000..f4fa255
--- /dev/null
+++ b/drivers/phy/marvell/Makefile
@@ -0,0 +1,6 @@
+obj-$(CONFIG_ARMADA375_USBCLUSTER_PHY) += phy-armada375-usb2.o
+obj-$(CONFIG_PHY_BERLIN_USB) += phy-berlin-usb.o
+obj-$(CONFIG_PHY_BERLIN_SATA) += phy-berlin-sata.o
+obj-$(CONFIG_PHY_MVEBU_SATA) += phy-mvebu-sata.o
+obj-$(CONFIG_PHY_PXA_28NM_USB2) += phy-pxa-28nm-usb2.o
+obj-$(CONFIG_PHY_PXA_28NM_HSIC) += phy-pxa-28nm-hsic.o
diff --git a/drivers/phy/phy-armada375-usb2.c b/drivers/phy/marvell/phy-armada375-usb2.c
similarity index 100%
rename from drivers/phy/phy-armada375-usb2.c
rename to drivers/phy/marvell/phy-armada375-usb2.c
diff --git a/drivers/phy/phy-berlin-sata.c b/drivers/phy/marvell/phy-berlin-sata.c
similarity index 100%
rename from drivers/phy/phy-berlin-sata.c
rename to drivers/phy/marvell/phy-berlin-sata.c
diff --git a/drivers/phy/phy-berlin-usb.c b/drivers/phy/marvell/phy-berlin-usb.c
similarity index 100%
rename from drivers/phy/phy-berlin-usb.c
rename to drivers/phy/marvell/phy-berlin-usb.c
diff --git a/drivers/phy/phy-mvebu-sata.c b/drivers/phy/marvell/phy-mvebu-sata.c
similarity index 100%
rename from drivers/phy/phy-mvebu-sata.c
rename to drivers/phy/marvell/phy-mvebu-sata.c
diff --git a/drivers/phy/phy-pxa-28nm-hsic.c b/drivers/phy/marvell/phy-pxa-28nm-hsic.c
similarity index 100%
rename from drivers/phy/phy-pxa-28nm-hsic.c
rename to drivers/phy/marvell/phy-pxa-28nm-hsic.c
diff --git a/drivers/phy/phy-pxa-28nm-usb2.c b/drivers/phy/marvell/phy-pxa-28nm-usb2.c
similarity index 100%
rename from drivers/phy/phy-pxa-28nm-usb2.c
rename to drivers/phy/marvell/phy-pxa-28nm-usb2.c
diff --git a/drivers/phy/qcom/Kconfig b/drivers/phy/qcom/Kconfig
new file mode 100644
index 0000000..9718d01
--- /dev/null
+++ b/drivers/phy/qcom/Kconfig
@@ -0,0 +1,23 @@
+#
+# PHY drivers for Qualcomm platforms
+#
+config PHY_QCOM_APQ8064_SATA
+ tristate "Qualcomm APQ8064 SATA SerDes/PHY driver"
+ depends on ARCH_QCOM
+ depends on HAS_IOMEM
+ depends on OF
+ select GENERIC_PHY
+
+config PHY_QCOM_IPQ806X_SATA
+ tristate "Qualcomm IPQ806x SATA SerDes/PHY driver"
+ depends on ARCH_QCOM
+ depends on HAS_IOMEM
+ depends on OF
+ select GENERIC_PHY
+
+config PHY_QCOM_UFS
+ tristate "Qualcomm UFS PHY driver"
+ depends on OF && ARCH_QCOM
+ select GENERIC_PHY
+ help
+ Support for UFS PHY on QCOM chipsets.
diff --git a/drivers/phy/qcom/Makefile b/drivers/phy/qcom/Makefile
new file mode 100644
index 0000000..2db3e77
--- /dev/null
+++ b/drivers/phy/qcom/Makefile
@@ -0,0 +1,5 @@
+obj-$(CONFIG_PHY_QCOM_APQ8064_SATA) += phy-qcom-apq8064-sata.o
+obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA) += phy-qcom-ipq806x-sata.o
+obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs.o \
+ += phy-qcom-ufs-qmp-20nm.o \
+ += phy-qcom-ufs-qmp-14nm.o
diff --git a/drivers/phy/phy-qcom-apq8064-sata.c b/drivers/phy/qcom/phy-qcom-apq8064-sata.c
similarity index 100%
rename from drivers/phy/phy-qcom-apq8064-sata.c
rename to drivers/phy/qcom/phy-qcom-apq8064-sata.c
diff --git a/drivers/phy/phy-qcom-ipq806x-sata.c b/drivers/phy/qcom/phy-qcom-ipq806x-sata.c
similarity index 100%
rename from drivers/phy/phy-qcom-ipq806x-sata.c
rename to drivers/phy/qcom/phy-qcom-ipq806x-sata.c
diff --git a/drivers/phy/phy-qcom-ufs-i.h b/drivers/phy/qcom/phy-qcom-ufs-i.h
similarity index 100%
rename from drivers/phy/phy-qcom-ufs-i.h
rename to drivers/phy/qcom/phy-qcom-ufs-i.h
diff --git a/drivers/phy/phy-qcom-ufs-qmp-14nm.c b/drivers/phy/qcom/phy-qcom-ufs-qmp-14nm.c
similarity index 100%
rename from drivers/phy/phy-qcom-ufs-qmp-14nm.c
rename to drivers/phy/qcom/phy-qcom-ufs-qmp-14nm.c
diff --git a/drivers/phy/phy-qcom-ufs-qmp-14nm.h b/drivers/phy/qcom/phy-qcom-ufs-qmp-14nm.h
similarity index 100%
rename from drivers/phy/phy-qcom-ufs-qmp-14nm.h
rename to drivers/phy/qcom/phy-qcom-ufs-qmp-14nm.h
diff --git a/drivers/phy/phy-qcom-ufs-qmp-20nm.c b/drivers/phy/qcom/phy-qcom-ufs-qmp-20nm.c
similarity index 100%
rename from drivers/phy/phy-qcom-ufs-qmp-20nm.c
rename to drivers/phy/qcom/phy-qcom-ufs-qmp-20nm.c
diff --git a/drivers/phy/phy-qcom-ufs-qmp-20nm.h b/drivers/phy/qcom/phy-qcom-ufs-qmp-20nm.h
similarity index 100%
rename from drivers/phy/phy-qcom-ufs-qmp-20nm.h
rename to drivers/phy/qcom/phy-qcom-ufs-qmp-20nm.h
diff --git a/drivers/phy/phy-qcom-ufs.c b/drivers/phy/qcom/phy-qcom-ufs.c
similarity index 100%
rename from drivers/phy/phy-qcom-ufs.c
rename to drivers/phy/qcom/phy-qcom-ufs.c
diff --git a/drivers/phy/rcar/Kconfig b/drivers/phy/rcar/Kconfig
new file mode 100644
index 0000000..169b5e2
--- /dev/null
+++ b/drivers/phy/rcar/Kconfig
@@ -0,0 +1,16 @@
+#
+# PHY drivers for Renesas's r-car platforms
+#
+config PHY_RCAR_GEN2
+ tristate "Renesas R-Car generation 2 USB PHY driver"
+ depends on ARCH_SHMOBILE
+ depends on GENERIC_PHY
+ help
+ Support for USB PHY found on Renesas R-Car generation 2 SoCs.
+
+config PHY_RCAR_GEN3_USB2
+ tristate "Renesas R-Car generation 3 USB 2.0 PHY driver"
+ depends on OF && ARCH_SHMOBILE
+ select GENERIC_PHY
+ help
+ Support for USB 2.0 PHY found on Renesas R-Car generation 3 SoCs.
diff --git a/drivers/phy/rcar/Makefile b/drivers/phy/rcar/Makefile
new file mode 100644
index 0000000..695241a
--- /dev/null
+++ b/drivers/phy/rcar/Makefile
@@ -0,0 +1,2 @@
+obj-$(CONFIG_PHY_RCAR_GEN2) += phy-rcar-gen2.o
+obj-$(CONFIG_PHY_RCAR_GEN3_USB2) += phy-rcar-gen3-usb2.o
diff --git a/drivers/phy/phy-rcar-gen2.c b/drivers/phy/rcar/phy-rcar-gen2.c
similarity index 100%
rename from drivers/phy/phy-rcar-gen2.c
rename to drivers/phy/rcar/phy-rcar-gen2.c
diff --git a/drivers/phy/phy-rcar-gen3-usb2.c b/drivers/phy/rcar/phy-rcar-gen3-usb2.c
similarity index 100%
rename from drivers/phy/phy-rcar-gen3-usb2.c
rename to drivers/phy/rcar/phy-rcar-gen3-usb2.c
diff --git a/drivers/phy/rockchip/Kconfig b/drivers/phy/rockchip/Kconfig
new file mode 100644
index 0000000..c575d1e
--- /dev/null
+++ b/drivers/phy/rockchip/Kconfig
@@ -0,0 +1,23 @@
+#
+# PHY drivers for Rockchip platforms
+#
+config PHY_ROCKCHIP_USB
+ tristate "Rockchip USB2 PHY Driver"
+ depends on ARCH_ROCKCHIP && OF
+ select GENERIC_PHY
+ help
+ Enable this to support the Rockchip USB 2.0 PHY.
+
+config PHY_ROCKCHIP_EMMC
+ tristate "Rockchip EMMC PHY Driver"
+ depends on ARCH_ROCKCHIP && OF
+ select GENERIC_PHY
+ help
+ Enable this to support the Rockchip EMMC PHY.
+
+config PHY_ROCKCHIP_DP
+ tristate "Rockchip Display Port PHY Driver"
+ depends on ARCH_ROCKCHIP && OF
+ select GENERIC_PHY
+ help
+ Enable this to support the Rockchip Display Port PHY.
diff --git a/drivers/phy/rockchip/Makefile b/drivers/phy/rockchip/Makefile
new file mode 100644
index 0000000..c15acc1
--- /dev/null
+++ b/drivers/phy/rockchip/Makefile
@@ -0,0 +1,3 @@
+obj-$(CONFIG_PHY_ROCKCHIP_DP) += phy-rockchip-dp.o
+obj-$(CONFIG_PHY_ROCKCHIP_EMMC) += phy-rockchip-emmc.o
+obj-$(CONFIG_PHY_ROCKCHIP_USB) += phy-rockchip-usb.o
diff --git a/drivers/phy/phy-rockchip-dp.c b/drivers/phy/rockchip/phy-rockchip-dp.c
similarity index 100%
rename from drivers/phy/phy-rockchip-dp.c
rename to drivers/phy/rockchip/phy-rockchip-dp.c
diff --git a/drivers/phy/phy-rockchip-emmc.c b/drivers/phy/rockchip/phy-rockchip-emmc.c
similarity index 100%
rename from drivers/phy/phy-rockchip-emmc.c
rename to drivers/phy/rockchip/phy-rockchip-emmc.c
diff --git a/drivers/phy/phy-rockchip-usb.c b/drivers/phy/rockchip/phy-rockchip-usb.c
similarity index 100%
rename from drivers/phy/phy-rockchip-usb.c
rename to drivers/phy/rockchip/phy-rockchip-usb.c
diff --git a/drivers/phy/samsung/Kconfig b/drivers/phy/samsung/Kconfig
new file mode 100644
index 0000000..80bdea7
--- /dev/null
+++ b/drivers/phy/samsung/Kconfig
@@ -0,0 +1,87 @@
+#
+# PHY drivers for Samsung platforms
+#
+config PHY_SAMSUNG_USB2
+ tristate "Samsung USB 2.0 PHY driver"
+ depends on HAS_IOMEM
+ depends on USB_EHCI_EXYNOS || USB_OHCI_EXYNOS || USB_DWC2
+ select GENERIC_PHY
+ select MFD_SYSCON
+ default ARCH_EXYNOS
+ help
+ Enable this to support the Samsung USB 2.0 PHY driver for Samsung
+ SoCs. This driver provides the interface for USB 2.0 PHY. Support
+ for particular PHYs will be enabled based on the SoC type in addition
+ to this driver.
+
+config PHY_S5PV210_USB2
+ bool "Support for S5PV210"
+ depends on PHY_SAMSUNG_USB2
+ depends on ARCH_S5PV210
+ help
+ Enable USB PHY support for S5PV210. This option requires that Samsung
+ USB 2.0 PHY driver is enabled and means that support for this
+ particular SoC is compiled in the driver. In case of S5PV210 two phys
+ are available - device and host.
+
+config PHY_EXYNOS4210_USB2
+ bool
+ depends on PHY_SAMSUNG_USB2
+ default CPU_EXYNOS4210
+
+config PHY_EXYNOS4X12_USB2
+ bool
+ depends on PHY_SAMSUNG_USB2
+ default SOC_EXYNOS3250 || SOC_EXYNOS4212 || SOC_EXYNOS4412
+
+config PHY_EXYNOS5250_USB2
+ bool
+ depends on PHY_SAMSUNG_USB2
+ default SOC_EXYNOS5250 || SOC_EXYNOS5420
+
+config PHY_EXYNOS5_USBDRD
+ tristate "Exynos5 SoC series USB DRD PHY driver"
+ depends on ARCH_EXYNOS && OF
+ depends on HAS_IOMEM
+ depends on USB_DWC3_EXYNOS
+ select GENERIC_PHY
+ select MFD_SYSCON
+ default y
+ help
+ Enable USB DRD PHY support for Exynos 5 SoC series.
+ This driver provides PHY interface for USB 3.0 DRD controller
+ present on Exynos5 SoC series.
+
+config PHY_EXYNOS_DP_VIDEO
+ tristate "EXYNOS SoC series Display Port PHY driver"
+ depends on OF
+ depends on ARCH_EXYNOS || COMPILE_TEST
+ default ARCH_EXYNOS
+ select GENERIC_PHY
+ help
+ Support for Display Port PHY found on Samsung EXYNOS SoCs.
+
+config PHY_EXYNOS_MIPI_VIDEO
+ tristate "S5P/EXYNOS SoC series MIPI CSI-2/DSI PHY driver"
+ depends on HAS_IOMEM
+ depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
+ select GENERIC_PHY
+ default y if ARCH_S5PV210 || ARCH_EXYNOS
+ help
+ Support for MIPI CSI-2 and MIPI DSI DPHY found on Samsung S5P
+ and EXYNOS SoCs.
+
+config PHY_EXYNOS5250_SATA
+ tristate "Exynos5250 Sata SerDes/PHY driver"
+ depends on SOC_EXYNOS5250
+ depends on HAS_IOMEM
+ depends on OF
+ select GENERIC_PHY
+ select I2C
+ select I2C_S3C2410
+ select MFD_SYSCON
+ help
+ Enable this to support SATA SerDes/Phy found on Samsung's
+ Exynos5250 based SoCs.This SerDes/Phy supports SATA 1.5 Gb/s,
+ SATA 3.0 Gb/s, SATA 6.0 Gb/s speeds. It supports one SATA host
+ port to accept one SATA device.
diff --git a/drivers/phy/samsung/Makefile b/drivers/phy/samsung/Makefile
new file mode 100644
index 0000000..585dbd7
--- /dev/null
+++ b/drivers/phy/samsung/Makefile
@@ -0,0 +1,10 @@
+obj-$(CONFIG_PHY_SAMSUNG_USB2) += phy-exynos-usb2.o
+phy-exynos-usb2-y += phy-samsung-usb2.o
+phy-exynos-usb2-$(CONFIG_PHY_S5PV210_USB2) += phy-s5pv210-usb2.o
+phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4210_USB2) += phy-exynos4210-usb2.o
+phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4X12_USB2) += phy-exynos4x12-usb2.o
+phy-exynos-usb2-$(CONFIG_PHY_EXYNOS5250_USB2) += phy-exynos5250-usb2.o
+obj-$(CONFIG_PHY_EXYNOS5_USBDRD) += phy-exynos5-usbdrd.o
+obj-$(CONFIG_PHY_EXYNOS_DP_VIDEO) += phy-exynos-dp-video.o
+obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO) += phy-exynos-mipi-video.o
+obj-$(CONFIG_PHY_EXYNOS5250_SATA) += phy-exynos5250-sata.o
diff --git a/drivers/phy/phy-exynos-dp-video.c b/drivers/phy/samsung/phy-exynos-dp-video.c
similarity index 100%
rename from drivers/phy/phy-exynos-dp-video.c
rename to drivers/phy/samsung/phy-exynos-dp-video.c
diff --git a/drivers/phy/phy-exynos-mipi-video.c b/drivers/phy/samsung/phy-exynos-mipi-video.c
similarity index 100%
rename from drivers/phy/phy-exynos-mipi-video.c
rename to drivers/phy/samsung/phy-exynos-mipi-video.c
diff --git a/drivers/phy/phy-exynos4210-usb2.c b/drivers/phy/samsung/phy-exynos4210-usb2.c
similarity index 100%
rename from drivers/phy/phy-exynos4210-usb2.c
rename to drivers/phy/samsung/phy-exynos4210-usb2.c
diff --git a/drivers/phy/phy-exynos4x12-usb2.c b/drivers/phy/samsung/phy-exynos4x12-usb2.c
similarity index 100%
rename from drivers/phy/phy-exynos4x12-usb2.c
rename to drivers/phy/samsung/phy-exynos4x12-usb2.c
diff --git a/drivers/phy/phy-exynos5-usbdrd.c b/drivers/phy/samsung/phy-exynos5-usbdrd.c
similarity index 100%
rename from drivers/phy/phy-exynos5-usbdrd.c
rename to drivers/phy/samsung/phy-exynos5-usbdrd.c
diff --git a/drivers/phy/phy-exynos5250-sata.c b/drivers/phy/samsung/phy-exynos5250-sata.c
similarity index 100%
rename from drivers/phy/phy-exynos5250-sata.c
rename to drivers/phy/samsung/phy-exynos5250-sata.c
diff --git a/drivers/phy/phy-exynos5250-usb2.c b/drivers/phy/samsung/phy-exynos5250-usb2.c
similarity index 100%
rename from drivers/phy/phy-exynos5250-usb2.c
rename to drivers/phy/samsung/phy-exynos5250-usb2.c
diff --git a/drivers/phy/phy-s5pv210-usb2.c b/drivers/phy/samsung/phy-s5pv210-usb2.c
similarity index 100%
rename from drivers/phy/phy-s5pv210-usb2.c
rename to drivers/phy/samsung/phy-s5pv210-usb2.c
diff --git a/drivers/phy/phy-samsung-usb2.c b/drivers/phy/samsung/phy-samsung-usb2.c
similarity index 100%
rename from drivers/phy/phy-samsung-usb2.c
rename to drivers/phy/samsung/phy-samsung-usb2.c
diff --git a/drivers/phy/phy-samsung-usb2.h b/drivers/phy/samsung/phy-samsung-usb2.h
similarity index 100%
rename from drivers/phy/phy-samsung-usb2.h
rename to drivers/phy/samsung/phy-samsung-usb2.h
diff --git a/drivers/phy/st/Kconfig b/drivers/phy/st/Kconfig
new file mode 100644
index 0000000..651b2bf
--- /dev/null
+++ b/drivers/phy/st/Kconfig
@@ -0,0 +1,51 @@
+#
+# PHY drivers for ST Micro platforms
+#
+config PHY_MIPHY28LP
+ tristate "STMicroelectronics MIPHY28LP PHY driver for STiH407"
+ depends on ARCH_STI
+ select GENERIC_PHY
+ help
+ Enable this to support the miphy transceiver (for SATA/PCIE/USB3)
+ that is part of STMicroelectronics STiH407 SoC.
+
+config PHY_MIPHY365X
+ tristate "STMicroelectronics MIPHY365X PHY driver for STiH41x series"
+ depends on ARCH_STI
+ depends on HAS_IOMEM
+ depends on OF
+ select GENERIC_PHY
+ help
+ Enable this to support the miphy transceiver (for SATA/PCIE)
+ that is part of STMicroelectronics STiH41x SoC series.
+
+config PHY_ST_SPEAR1310_MIPHY
+ tristate "ST SPEAR1310-MIPHY driver"
+ select GENERIC_PHY
+ depends on MACH_SPEAR1310 || COMPILE_TEST
+ help
+ Support for ST SPEAr1310 MIPHY which can be used for PCIe and SATA.
+
+config PHY_ST_SPEAR1340_MIPHY
+ tristate "ST SPEAR1340-MIPHY driver"
+ select GENERIC_PHY
+ depends on MACH_SPEAR1340 || COMPILE_TEST
+ help
+ Support for ST SPEAr1340 MIPHY which can be used for PCIe and SATA.
+
+config PHY_STIH407_USB
+ tristate "STMicroelectronics USB2 picoPHY driver for STiH407 family"
+ depends on RESET_CONTROLLER
+ depends on ARCH_STI || COMPILE_TEST
+ select GENERIC_PHY
+ help
+ Enable this support to enable the picoPHY device used by USB2
+ and USB3 controllers on STMicroelectronics STiH407 SoC families.
+
+config PHY_STIH41X_USB
+ tristate "STMicroelectronics USB2 PHY driver for STiH41x series"
+ depends on ARCH_STI
+ select GENERIC_PHY
+ help
+ Enable this to support the USB transceiver that is part of
+ STMicroelectronics STiH41x SoC series.
diff --git a/drivers/phy/st/Makefile b/drivers/phy/st/Makefile
new file mode 100644
index 0000000..907561b
--- /dev/null
+++ b/drivers/phy/st/Makefile
@@ -0,0 +1,6 @@
+obj-$(CONFIG_PHY_MIPHY28LP) += phy-miphy28lp.o
+obj-$(CONFIG_PHY_MIPHY365X) += phy-miphy365x.o
+obj-$(CONFIG_PHY_ST_SPEAR1310_MIPHY) += phy-spear1310-miphy.o
+obj-$(CONFIG_PHY_ST_SPEAR1340_MIPHY) += phy-spear1340-miphy.o
+obj-$(CONFIG_PHY_STIH407_USB) += phy-stih407-usb.o
+obj-$(CONFIG_PHY_STIH41X_USB) += phy-stih41x-usb.o
diff --git a/drivers/phy/phy-miphy28lp.c b/drivers/phy/st/phy-miphy28lp.c
similarity index 100%
rename from drivers/phy/phy-miphy28lp.c
rename to drivers/phy/st/phy-miphy28lp.c
diff --git a/drivers/phy/phy-miphy365x.c b/drivers/phy/st/phy-miphy365x.c
similarity index 100%
rename from drivers/phy/phy-miphy365x.c
rename to drivers/phy/st/phy-miphy365x.c
diff --git a/drivers/phy/phy-spear1310-miphy.c b/drivers/phy/st/phy-spear1310-miphy.c
similarity index 100%
rename from drivers/phy/phy-spear1310-miphy.c
rename to drivers/phy/st/phy-spear1310-miphy.c
diff --git a/drivers/phy/phy-spear1340-miphy.c b/drivers/phy/st/phy-spear1340-miphy.c
similarity index 100%
rename from drivers/phy/phy-spear1340-miphy.c
rename to drivers/phy/st/phy-spear1340-miphy.c
diff --git a/drivers/phy/phy-stih407-usb.c b/drivers/phy/st/phy-stih407-usb.c
similarity index 100%
rename from drivers/phy/phy-stih407-usb.c
rename to drivers/phy/st/phy-stih407-usb.c
diff --git a/drivers/phy/phy-stih41x-usb.c b/drivers/phy/st/phy-stih41x-usb.c
similarity index 100%
rename from drivers/phy/phy-stih41x-usb.c
rename to drivers/phy/st/phy-stih41x-usb.c
diff --git a/drivers/phy/sunxi/Kconfig b/drivers/phy/sunxi/Kconfig
new file mode 100644
index 0000000..eb06427
--- /dev/null
+++ b/drivers/phy/sunxi/Kconfig
@@ -0,0 +1,28 @@
+#
+# PHY drivers for Allwinner's sunxi platforms
+#
+config PHY_SUN4I_USB
+ tristate "Allwinner sunxi SoC USB PHY driver"
+ depends on ARCH_SUNXI && HAS_IOMEM && OF
+ depends on RESET_CONTROLLER
+ depends on EXTCON
+ depends on POWER_SUPPLY
+ select GENERIC_PHY
+ help
+ Enable this to support the transceiver that is part of Allwinner
+ sunxi SoCs.
+
+ This driver controls the entire USB PHY block, both the USB OTG
+ parts, as well as the 2 regular USB 2 host PHYs.
+
+config PHY_SUN9I_USB
+ tristate "Allwinner sun9i SoC USB PHY driver"
+ depends on ARCH_SUNXI && HAS_IOMEM && OF
+ depends on RESET_CONTROLLER
+ depends on USB_COMMON
+ select GENERIC_PHY
+ help
+ Enable this to support the transceiver that is part of Allwinner
+ sun9i SoCs.
+
+ This driver controls each individual USB 2 host PHY.
diff --git a/drivers/phy/sunxi/Makefile b/drivers/phy/sunxi/Makefile
new file mode 100644
index 0000000..8605529c
--- /dev/null
+++ b/drivers/phy/sunxi/Makefile
@@ -0,0 +1,2 @@
+obj-$(CONFIG_PHY_SUN4I_USB) += phy-sun4i-usb.o
+obj-$(CONFIG_PHY_SUN9I_USB) += phy-sun9i-usb.o
diff --git a/drivers/phy/phy-sun4i-usb.c b/drivers/phy/sunxi/phy-sun4i-usb.c
similarity index 100%
rename from drivers/phy/phy-sun4i-usb.c
rename to drivers/phy/sunxi/phy-sun4i-usb.c
diff --git a/drivers/phy/phy-sun9i-usb.c b/drivers/phy/sunxi/phy-sun9i-usb.c
similarity index 100%
rename from drivers/phy/phy-sun9i-usb.c
rename to drivers/phy/sunxi/phy-sun9i-usb.c
diff --git a/drivers/phy/ti/Kconfig b/drivers/phy/ti/Kconfig
new file mode 100644
index 0000000..1e3e307
--- /dev/null
+++ b/drivers/phy/ti/Kconfig
@@ -0,0 +1,67 @@
+#
+# PHY drivers for TI platforms
+#
+config PHY_DM816X_USB
+ tristate "TI dm816x USB PHY driver"
+ depends on ARCH_OMAP2PLUS
+ depends on USB_SUPPORT
+ select GENERIC_PHY
+ select USB_PHY
+ help
+ Enable this for dm816x USB to work.
+
+config OMAP_CONTROL_PHY
+ tristate "OMAP CONTROL PHY Driver"
+ depends on ARCH_OMAP2PLUS || COMPILE_TEST
+ help
+ Enable this to add support for the PHY part present in the control
+ module. This driver has API to power on the USB2 PHY and to write to
+ the mailbox. The mailbox is present only in omap4 and the register to
+ power on the USB2 PHY is present in OMAP4 and OMAP5. OMAP5 has an
+ additional register to power on USB3 PHY/SATA PHY/PCIE PHY
+ (PIPE3 PHY).
+
+config OMAP_USB2
+ tristate "OMAP USB2 PHY Driver"
+ depends on ARCH_OMAP2PLUS
+ depends on USB_SUPPORT
+ select GENERIC_PHY
+ select USB_PHY
+ select OMAP_CONTROL_PHY
+ depends on OMAP_OCP2SCP
+ help
+ Enable this to support the transceiver that is part of SOC. This
+ driver takes care of all the PHY functionality apart from comparator.
+ The USB OTG controller communicates with the comparator using this
+ driver.
+
+config TI_PIPE3
+ tristate "TI PIPE3 PHY Driver"
+ depends on ARCH_OMAP2PLUS || COMPILE_TEST
+ select GENERIC_PHY
+ select OMAP_CONTROL_PHY
+ depends on OMAP_OCP2SCP
+ help
+ Enable this to support the PIPE3 PHY that is part of TI SOCs. This
+ driver takes care of all the PHY functionality apart from comparator.
+ This driver interacts with the "OMAP Control PHY Driver" to power
+ on/off the PHY.
+
+config PHY_TUSB1210
+ tristate "TI TUSB1210 ULPI PHY module"
+ depends on USB_ULPI_BUS
+ select GENERIC_PHY
+ help
+ Support for TI TUSB1210 USB ULPI PHY.
+
+config TWL4030_USB
+ tristate "TWL4030 USB Transceiver Driver"
+ depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS
+ depends on USB_SUPPORT
+ select GENERIC_PHY
+ select USB_PHY
+ help
+ Enable this to support the USB OTG transceiver on TWL4030
+ family chips (including the TWL5030 and TPS659x0 devices).
+ This transceiver supports high and full speed devices plus,
+ in host mode, low speed.
diff --git a/drivers/phy/ti/Makefile b/drivers/phy/ti/Makefile
new file mode 100644
index 0000000..2d16f77
--- /dev/null
+++ b/drivers/phy/ti/Makefile
@@ -0,0 +1,6 @@
+obj-$(CONFIG_PHY_DM816X_USB) += phy-dm816x-usb.o
+obj-$(CONFIG_OMAP_CONTROL_PHY) += phy-omap-control.o
+obj-$(CONFIG_OMAP_USB2) += phy-omap-usb2.o
+obj-$(CONFIG_TI_PIPE3) += phy-ti-pipe3.o
+obj-$(CONFIG_PHY_TUSB1210) += phy-tusb1210.o
+obj-$(CONFIG_TWL4030_USB) += phy-twl4030-usb.o
diff --git a/drivers/phy/phy-dm816x-usb.c b/drivers/phy/ti/phy-dm816x-usb.c
similarity index 100%
rename from drivers/phy/phy-dm816x-usb.c
rename to drivers/phy/ti/phy-dm816x-usb.c
diff --git a/drivers/phy/phy-omap-control.c b/drivers/phy/ti/phy-omap-control.c
similarity index 100%
rename from drivers/phy/phy-omap-control.c
rename to drivers/phy/ti/phy-omap-control.c
diff --git a/drivers/phy/phy-omap-usb2.c b/drivers/phy/ti/phy-omap-usb2.c
similarity index 100%
rename from drivers/phy/phy-omap-usb2.c
rename to drivers/phy/ti/phy-omap-usb2.c
diff --git a/drivers/phy/phy-ti-pipe3.c b/drivers/phy/ti/phy-ti-pipe3.c
similarity index 100%
rename from drivers/phy/phy-ti-pipe3.c
rename to drivers/phy/ti/phy-ti-pipe3.c
diff --git a/drivers/phy/phy-tusb1210.c b/drivers/phy/ti/phy-tusb1210.c
similarity index 100%
rename from drivers/phy/phy-tusb1210.c
rename to drivers/phy/ti/phy-tusb1210.c
diff --git a/drivers/phy/phy-twl4030-usb.c b/drivers/phy/ti/phy-twl4030-usb.c
similarity index 100%
rename from drivers/phy/phy-twl4030-usb.c
rename to drivers/phy/ti/phy-twl4030-usb.c
diff --git a/drivers/phy/ulpi_phy.h b/drivers/phy/ti/ulpi_phy.h
similarity index 100%
rename from drivers/phy/ulpi_phy.h
rename to drivers/phy/ti/ulpi_phy.h
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
