Hi Chanwoo Choi, On 10 December 2015 at 05:42, Chanwoo Choi <cw00.choi@xxxxxxxxxxx> wrote: > Hi Anand, > > First of all, thanks for trying to test this series. > > On 2015년 12월 10일 04:05, Anand Moon wrote: >> Hi Chanwoo Choi, >> >> On 9 December 2015 at 09:37, Chanwoo Choi <cw00.choi@xxxxxxxxxxx> wrote: >>> This patch-set includes the two features as following. The generic exynos bus >>> frequency driver is able to support almost Exynos SoCs for bus frequency >>> scaling. And the new passive governor is able to make the dependency on >>> between devices for frequency/voltage scaling. I had posted the patch-set[1] >>> with the similiar concept. This is is revised version for exynos bus frequency. >>> - Generic exynos bus frequency driver >>> - New passive governor of DEVFREQ framework >>> >>> Depends on: >>> - This patch-set is based on devfreq.git[2]. >>> [1] https://lkml.org/lkml/2015/1/7/872 >>> : [PATCHv3 0/8] devfreq: Add generic exynos memory-bus frequency driver >>> [2] https://git.kernel.org/cgit/linux/kernel/git/mzx/devfreq.git/ (branch: for-rafael) >>> >>> Changes from v1: >>> (https://lkml.org/lkml/2015/11/26/260) >>> - Check whether the instance of regulator is NULL or not >>> when executing regulator_disable() because of only parent >>> devfreq device has the regulator instance. After fixing it, >>> the wake-up from suspend state is well working. (patch1) >>> - Fix bug which checks 'bus-clk' instead of 'bus->regulator' >>> after calling devm_clk_get() (on patch1) >>> - Update the documentation to remove the description about >>> DEVFREQ-EVENT subsystem (on patch2) >>> - Add the full name of DMC (Dynamic Memory Controller) (on patch2) >>> - Modify the detailed correlation of buses for Exynos3250 >>> on documentation (patch2) >>> - Add the MFC bus node for Exynos3250 (on patch11, patch12) >>> - Fix the duplicate frequency of bus_display on Exynos4x12.dtsi >>> - Add the PPMU node for exynos4412-odroidu3 >>> - Add the support of bus frequency for exynos4412-odroidu3 >>> >>> Detailed descirption for patch-set: >>> 1. Add generic exynos bus frequency driver >>> : This patch-set adds the generic exynos bus frequency driver for AXI bus >>> of sub-blocks in exynos SoC. The Samsung Exynos SoC have the common >>> architecture for bus between DRAM and sub-blocks in SoC. >>> >>> There are the different buses according to Exynos SoC because Exynos SoC >>> has the differnt sub-blocks and bus speed. In spite of this difference >>> among Exynos SoCs, this driver is able to support almost Exynos SoC by adding >>> unique data of each bus in the devicetree file. >>> >>> In devicetree, each bus node has a bus clock, regulator, operation-point >>> and devfreq-event devices which measure the utilization of each bus block. >>> >>> For example, >>> - The bus of DMC block in exynos3250.dtsi are listed below: >>> >>> bus_dmc: bus_dmc { >>> compatible = "samsung,exynos-bus"; >>> clocks = <&cmu_dmc CLK_DIV_DMC>; >>> clock-names = "bus"; >>> operating-points-v2 = <&bus_dmc_opp_table>; >>> status = "disabled"; >>> }; >>> >>> bus_dmc_opp_table: opp_table0 { >>> compatible = "operating-points-v2"; >>> opp-shared; >>> >>> opp00 { >>> opp-hz = /bits/ 64 <50000000>; >>> opp-microvolt = <800000>; >>> }; >>> opp01 { >>> opp-hz = /bits/ 64 <100000000>; >>> opp-microvolt = <800000>; >>> }; >>> opp02 { >>> opp-hz = /bits/ 64 <134000000>; >>> opp-microvolt = <800000>; >>> }; >>> opp03 { >>> opp-hz = /bits/ 64 <200000000>; >>> opp-microvolt = <800000>; >>> }; >>> opp04 { >>> opp-hz = /bits/ 64 <400000000>; >>> opp-microvolt = <875000>; >>> }; >>> }; >>> >>> - Usage case to handle the frequency and voltage of bus on runtime >>> in exynos3250-rinato.dts are listed below: >>> >>> &bus_dmc { >>> devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>; >>> vdd-supply = <&buck1_reg>; /* VDD_MIF */ >>> status = "okay"; >>> }; >>> >>> 2. Add new passive governor of DEVFREQ framework (patch5-patch7) >>> : This patch-set add the new passive governor for DEVFREQ framework. >>> The existing governors (ondemand, performance and so on) are used for DVFS >>> (Dynamic Voltage and Frequency Scaling) drivers. The existing governors >>> are independently used for specific device driver which don't give the >>> influence to other device drviers and also don't receive the effect from >>> other device drivers. >>> >>> The passive governor depends on operation of parent driver with existing >>> governors(ondemand, performance and so on) extremely and is not able to >>> decide the new frequency by oneself. According to the decided new frequency >>> of parent driver with governor, the passive governor uses it to decide >>> the appropriate frequency for own device driver. The passive governor >>> must need the following information from device tree: >>> >>> For exameple, >>> There are one more bus device drivers in Exynos3250 which need to >>> change their source clock according to their utilization on runtime. >>> But, they share the same power line (e.g., regulator). So, LEFTBUS bus >>> driver is operated as parent with ondemand governor and then the rest >>> device driver with passive governor. >>> >>> The buses of Internal block in exynos3250.dtsi are listed below: >>> When LEFTBUS bus driver (parent) changes the bus frequency with >>> ondemand governor on runtime, the rest bus devices which sharing >>> the same power line (VDD_INT) will change the each bus frequency >>> according to the decision of LEFTBUS bus driver (parent). >>> >>> - INT (Internal) block >>> : VDD_INT |--- LEFTBUS >>> |--- PERIL >>> |--- MFC >>> |--- G3D >>> |--- RIGHTBUS >>> |--- FSYS >>> |--- LCD0 >>> |--- PERIR >>> |--- ISP >>> |--- CAM >>> >>> - The buss of INT block in exynos3250.dtsi are listed below: >>> bus_leftbus: bus_leftbus { >>> compatible = "samsung,exynos-bus"; >>> clocks = <&cmu CLK_DIV_GDL>; >>> clock-names = "bus"; >>> operating-points-v2 = <&bus_leftbus_opp_table>; >>> status = "disabled"; >>> }; >>> >>> bus_rightbus: bus_rightbus { >>> compatible = "samsung,exynos-bus"; >>> clocks = <&cmu CLK_DIV_GDR>; >>> clock-names = "bus"; >>> operating-points-v2 = <&bus_leftbus_opp_table>; >>> status = "disabled"; >>> }; >>> >>> (Omit the rest bus dt node) >>> >>> - Usage case to handle the frequency and voltage of bus on runtime >>> in exynos3250-rinato.dts are listed below: >>> /* Parent bus device of VDD_INT */ >>> &bus_leftbus { >>> devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>; >>> vdd-supply = <&buck3_reg>; >>> status = "okay"; >>> }; >>> >>> /* Passive bus device depend on LEFTBUS bus. */ >>> &bus_rightbus { >>> devfreq = <&bus_leftbus>; /* 'devfreq' property indicates >>> the phandle of parent device. */ >>> status = "okay"; >>> }; >>> >>> (Omit the rest bus dt node) >>> >>> Chanwoo Choi (19): >>> PM / devfreq: exynos: Add generic exynos bus frequency driver >>> PM / devfreq: exynos: Add documentation for generic exynos bus frequency driver >>> ARM: dts: Add DMC bus node for Exynos3250 >>> ARM: dts: Add DMC bus frequency for exynos3250-rinato/monk >>> PM / devfreq: Add new passive governor >>> PM / devfreq: Add devfreq_get_devfreq_by_phandle() >>> PM / devfreq: Show the related information according to governor type >>> PM / devfreq: exynos: Add support of bus frequency of sub-blocks using passive governor >>> PM / devfreq: exynos: Update documentation for bus devices using passive governor >>> PM / devfreq: exynos: Add the detailed correlation between sub-blocks and power line >>> PM / devfreq: exynos: Remove unused exynos4/5 busfreq driver >>> ARM: dts: Add bus nodes using VDD_INT for Exynos3250 >>> ARM: dts: Add bus nodes using VDD_MIF for Exynos4x12 >>> ARM: dts: Add bus nodes using VDD_INT for Exynos4x12 >>> ARM: dts: Add bus nodes using VDD_MIF for Exynos4210 >>> ARM: dts: Add PPMU node for exynos4412-odroidu3 >>> ARM: dts: Add support of bus frequency using VDD_INT for exynos3250-rinato >>> ARM: dts: Expand the voltage range of buck1/3 regulator for exynos4412-odroidu3 >>> ARM: dts: Add support of bus frequency for exynos4412-trats/odroidu3 >>> >>> .../devicetree/bindings/devfreq/exynos-bus.txt | 383 +++++++ >>> arch/arm/boot/dts/exynos3250-monk.dts | 6 + >>> arch/arm/boot/dts/exynos3250-rinato.dts | 47 + >>> arch/arm/boot/dts/exynos3250.dtsi | 194 ++++ >>> arch/arm/boot/dts/exynos4210.dtsi | 172 ++++ >>> arch/arm/boot/dts/exynos4412-odroid-common.dtsi | 93 +- >>> arch/arm/boot/dts/exynos4412-trats2.dts | 47 + >>> arch/arm/boot/dts/exynos4x12.dtsi | 184 ++++ >>> drivers/devfreq/Kconfig | 37 +- >>> drivers/devfreq/Makefile | 2 + >>> drivers/devfreq/devfreq.c | 120 ++- >>> drivers/devfreq/exynos/Makefile | 3 +- >>> drivers/devfreq/exynos/exynos-bus.c | 549 ++++++++++ >>> drivers/devfreq/exynos/exynos4_bus.c | 1055 -------------------- >>> drivers/devfreq/exynos/exynos4_bus.h | 110 -- >>> drivers/devfreq/exynos/exynos5_bus.c | 431 -------- >>> drivers/devfreq/exynos/exynos_ppmu.c | 119 --- >>> drivers/devfreq/exynos/exynos_ppmu.h | 86 -- >>> drivers/devfreq/governor.h | 7 + >>> drivers/devfreq/governor_passive.c | 109 ++ >>> drivers/devfreq/governor_performance.c | 1 + >>> drivers/devfreq/governor_powersave.c | 1 + >>> drivers/devfreq/governor_simpleondemand.c | 1 + >>> drivers/devfreq/governor_userspace.c | 1 + >>> include/linux/devfreq.h | 28 + >>> 25 files changed, 1958 insertions(+), 1828 deletions(-) >>> create mode 100644 Documentation/devicetree/bindings/devfreq/exynos-bus.txt >>> create mode 100644 drivers/devfreq/exynos/exynos-bus.c >>> delete mode 100644 drivers/devfreq/exynos/exynos4_bus.c >>> delete mode 100644 drivers/devfreq/exynos/exynos4_bus.h >>> delete mode 100644 drivers/devfreq/exynos/exynos5_bus.c >>> delete mode 100644 drivers/devfreq/exynos/exynos_ppmu.c >>> delete mode 100644 drivers/devfreq/exynos/exynos_ppmu.h >>> create mode 100644 drivers/devfreq/governor_passive.c >>> >>> -- >>> 1.9.1 >>> >> >> I could not get this series to work with my Odroid U3. >> >> [ 4.602768] input: gpio_keys as /devices/platform/gpio_keys/input/input0 >> [ 4.605527] devfreq bus_leftbus: Couldn't update frequency >> transition information. >> [ 4.607319] devfreq bus_dmc: Couldn't update frequency transition >> information. >> [ 4.625096] usb 1-3: New USB device found, idVendor=0424, idProduct=3503 > > This log indicates the problem of 'trats_stat' sysfs entry of devfreq framework > during kernel booting. But, this log don't affect the behavior of bus frequency > on Odroid-U3. > > After completing kernel and platform booting, you can check the operation > of Bus frequency with follwoing sysfs entry: > > root@localhost:~# ls -al /sys/class/devfreq > total 0 > drwxr-xr-x 2 root root 0 Dec 31 17:00 . > drwxr-xr-x 44 root root 0 Dec 31 17:00 .. > lrwxrwxrwx 1 root root 0 Dec 31 17:00 bus_acp -> ../../devices/platform/bus_acp/devfreq/bus_acp > lrwxrwxrwx 1 root root 0 Dec 31 17:00 bus_c2c -> ../../devices/platform/bus_c2c/devfreq/bus_c2c > lrwxrwxrwx 1 root root 0 Dec 31 17:00 bus_display -> ../../devices/platform/bus_display/devfreq/bus_display > lrwxrwxrwx 1 root root 0 Dec 31 17:00 bus_dmc -> ../../devices/platform/bus_dmc/devfreq/bus_dmc > lrwxrwxrwx 1 root root 0 Dec 31 17:00 bus_fsys -> ../../devices/platform/bus_fsys/devfreq/bus_fsys > lrwxrwxrwx 1 root root 0 Dec 31 17:00 bus_leftbus -> ../../devices/platform/bus_leftbus/devfreq/bus_leftbus > lrwxrwxrwx 1 root root 0 Dec 31 17:00 bus_mfc -> ../../devices/platform/bus_mfc/devfreq/bus_mfc > lrwxrwxrwx 1 root root 0 Dec 31 17:00 bus_peri -> ../../devices/platform/bus_peri/devfreq/bus_peri > lrwxrwxrwx 1 root root 0 Dec 31 17:00 bus_rightbus -> ../../devices/platform/bus_rightbus/devfreq/bus_rightbus > > root@localhost:~# cat /sys/class/devfreq/bus_leftbus/trans_stat > From : To > : 100000000 134000000 160000000 200000000 time(ms) > 100000000: 0 0 0 24 2020 > 134000000: 0 0 0 10 1190 > 160000000: 0 0 0 0 0 > * 200000000: 24 10 0 0 118160 > Total transition : 68 > > Also, when changing the frequency of each bus, exynos-bus.c show > the debug message. If you need more detailed information, > you could check this log message. > > Regards, > Chanwoo Choi Thanks for you input. It seem to be working I have see the counter increment. Sorry for the noise. root@odroidu3:~# cat /sys/class/devfreq/bus_dmc/trans_stat From : To : 100000000 134000000 160000000 200000000 400000000 time(ms) 100000000: 0 0 0 0 2 560 134000000: 0 0 0 0 1 190 160000000: 0 0 0 0 0 0 200000000: 0 0 0 0 2 310 * 400000000: 2 1 0 2 0 332400 Total transition : 10 root@odroidu3:~# cat /sys/class/devfreq/bus_rightbus/trans_stat Not Supported. root@odroidu3:~# Tested on Odroid U3 Tested-by: Anand Moon <linux.amoon@xxxxxxxxx> -Anand Moon -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
 |