Hi Anand, First of all, thanks for trying to test this series. On 2015년 12월 10일 04:05, Anand Moon wrote: > Hi Chanwoo Choi, > > On 9 December 2015 at 09:37, Chanwoo Choi <cw00.choi@xxxxxxxxxxx> wrote: >> This patch-set includes the two features as following. The generic exynos bus >> frequency driver is able to support almost Exynos SoCs for bus frequency >> scaling. And the new passive governor is able to make the dependency on >> between devices for frequency/voltage scaling. I had posted the patch-set[1] >> with the similiar concept. This is is revised version for exynos bus frequency. >> - Generic exynos bus frequency driver >> - New passive governor of DEVFREQ framework >> >> Depends on: >> - This patch-set is based on devfreq.git[2]. >> [1] https://lkml.org/lkml/2015/1/7/872 >> : [PATCHv3 0/8] devfreq: Add generic exynos memory-bus frequency driver >> [2] https://git.kernel.org/cgit/linux/kernel/git/mzx/devfreq.git/ (branch: for-rafael) >> >> Changes from v1: >> (https://lkml.org/lkml/2015/11/26/260) >> - Check whether the instance of regulator is NULL or not >> when executing regulator_disable() because of only parent >> devfreq device has the regulator instance. After fixing it, >> the wake-up from suspend state is well working. (patch1) >> - Fix bug which checks 'bus-clk' instead of 'bus->regulator' >> after calling devm_clk_get() (on patch1) >> - Update the documentation to remove the description about >> DEVFREQ-EVENT subsystem (on patch2) >> - Add the full name of DMC (Dynamic Memory Controller) (on patch2) >> - Modify the detailed correlation of buses for Exynos3250 >> on documentation (patch2) >> - Add the MFC bus node for Exynos3250 (on patch11, patch12) >> - Fix the duplicate frequency of bus_display on Exynos4x12.dtsi >> - Add the PPMU node for exynos4412-odroidu3 >> - Add the support of bus frequency for exynos4412-odroidu3 >> >> Detailed descirption for patch-set: >> 1. Add generic exynos bus frequency driver >> : This patch-set adds the generic exynos bus frequency driver for AXI bus >> of sub-blocks in exynos SoC. The Samsung Exynos SoC have the common >> architecture for bus between DRAM and sub-blocks in SoC. >> >> There are the different buses according to Exynos SoC because Exynos SoC >> has the differnt sub-blocks and bus speed. In spite of this difference >> among Exynos SoCs, this driver is able to support almost Exynos SoC by adding >> unique data of each bus in the devicetree file. >> >> In devicetree, each bus node has a bus clock, regulator, operation-point >> and devfreq-event devices which measure the utilization of each bus block. >> >> For example, >> - The bus of DMC block in exynos3250.dtsi are listed below: >> >> bus_dmc: bus_dmc { >> compatible = "samsung,exynos-bus"; >> clocks = <&cmu_dmc CLK_DIV_DMC>; >> clock-names = "bus"; >> operating-points-v2 = <&bus_dmc_opp_table>; >> status = "disabled"; >> }; >> >> bus_dmc_opp_table: opp_table0 { >> compatible = "operating-points-v2"; >> opp-shared; >> >> opp00 { >> opp-hz = /bits/ 64 <50000000>; >> opp-microvolt = <800000>; >> }; >> opp01 { >> opp-hz = /bits/ 64 <100000000>; >> opp-microvolt = <800000>; >> }; >> opp02 { >> opp-hz = /bits/ 64 <134000000>; >> opp-microvolt = <800000>; >> }; >> opp03 { >> opp-hz = /bits/ 64 <200000000>; >> opp-microvolt = <800000>; >> }; >> opp04 { >> opp-hz = /bits/ 64 <400000000>; >> opp-microvolt = <875000>; >> }; >> }; >> >> - Usage case to handle the frequency and voltage of bus on runtime >> in exynos3250-rinato.dts are listed below: >> >> &bus_dmc { >> devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>; >> vdd-supply = <&buck1_reg>; /* VDD_MIF */ >> status = "okay"; >> }; >> >> 2. Add new passive governor of DEVFREQ framework (patch5-patch7) >> : This patch-set add the new passive governor for DEVFREQ framework. >> The existing governors (ondemand, performance and so on) are used for DVFS >> (Dynamic Voltage and Frequency Scaling) drivers. The existing governors >> are independently used for specific device driver which don't give the >> influence to other device drviers and also don't receive the effect from >> other device drivers. >> >> The passive governor depends on operation of parent driver with existing >> governors(ondemand, performance and so on) extremely and is not able to >> decide the new frequency by oneself. According to the decided new frequency >> of parent driver with governor, the passive governor uses it to decide >> the appropriate frequency for own device driver. The passive governor >> must need the following information from device tree: >> >> For exameple, >> There are one more bus device drivers in Exynos3250 which need to >> change their source clock according to their utilization on runtime. >> But, they share the same power line (e.g., regulator). So, LEFTBUS bus >> driver is operated as parent with ondemand governor and then the rest >> device driver with passive governor. >> >> The buses of Internal block in exynos3250.dtsi are listed below: >> When LEFTBUS bus driver (parent) changes the bus frequency with >> ondemand governor on runtime, the rest bus devices which sharing >> the same power line (VDD_INT) will change the each bus frequency >> according to the decision of LEFTBUS bus driver (parent). >> >> - INT (Internal) block >> : VDD_INT |--- LEFTBUS >> |--- PERIL >> |--- MFC >> |--- G3D >> |--- RIGHTBUS >> |--- FSYS >> |--- LCD0 >> |--- PERIR >> |--- ISP >> |--- CAM >> >> - The buss of INT block in exynos3250.dtsi are listed below: >> bus_leftbus: bus_leftbus { >> compatible = "samsung,exynos-bus"; >> clocks = <&cmu CLK_DIV_GDL>; >> clock-names = "bus"; >> operating-points-v2 = <&bus_leftbus_opp_table>; >> status = "disabled"; >> }; >> >> bus_rightbus: bus_rightbus { >> compatible = "samsung,exynos-bus"; >> clocks = <&cmu CLK_DIV_GDR>; >> clock-names = "bus"; >> operating-points-v2 = <&bus_leftbus_opp_table>; >> status = "disabled"; >> }; >> >> (Omit the rest bus dt node) >> >> - Usage case to handle the frequency and voltage of bus on runtime >> in exynos3250-rinato.dts are listed below: >> /* Parent bus device of VDD_INT */ >> &bus_leftbus { >> devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>; >> vdd-supply = <&buck3_reg>; >> status = "okay"; >> }; >> >> /* Passive bus device depend on LEFTBUS bus. */ >> &bus_rightbus { >> devfreq = <&bus_leftbus>; /* 'devfreq' property indicates >> the phandle of parent device. */ >> status = "okay"; >> }; >> >> (Omit the rest bus dt node) >> >> Chanwoo Choi (19): >> PM / devfreq: exynos: Add generic exynos bus frequency driver >> PM / devfreq: exynos: Add documentation for generic exynos bus frequency driver >> ARM: dts: Add DMC bus node for Exynos3250 >> ARM: dts: Add DMC bus frequency for exynos3250-rinato/monk >> PM / devfreq: Add new passive governor >> PM / devfreq: Add devfreq_get_devfreq_by_phandle() >> PM / devfreq: Show the related information according to governor type >> PM / devfreq: exynos: Add support of bus frequency of sub-blocks using passive governor >> PM / devfreq: exynos: Update documentation for bus devices using passive governor >> PM / devfreq: exynos: Add the detailed correlation between sub-blocks and power line >> PM / devfreq: exynos: Remove unused exynos4/5 busfreq driver >> ARM: dts: Add bus nodes using VDD_INT for Exynos3250 >> ARM: dts: Add bus nodes using VDD_MIF for Exynos4x12 >> ARM: dts: Add bus nodes using VDD_INT for Exynos4x12 >> ARM: dts: Add bus nodes using VDD_MIF for Exynos4210 >> ARM: dts: Add PPMU node for exynos4412-odroidu3 >> ARM: dts: Add support of bus frequency using VDD_INT for exynos3250-rinato >> ARM: dts: Expand the voltage range of buck1/3 regulator for exynos4412-odroidu3 >> ARM: dts: Add support of bus frequency for exynos4412-trats/odroidu3 >> >> .../devicetree/bindings/devfreq/exynos-bus.txt | 383 +++++++ >> arch/arm/boot/dts/exynos3250-monk.dts | 6 + >> arch/arm/boot/dts/exynos3250-rinato.dts | 47 + >> arch/arm/boot/dts/exynos3250.dtsi | 194 ++++ >> arch/arm/boot/dts/exynos4210.dtsi | 172 ++++ >> arch/arm/boot/dts/exynos4412-odroid-common.dtsi | 93 +- >> arch/arm/boot/dts/exynos4412-trats2.dts | 47 + >> arch/arm/boot/dts/exynos4x12.dtsi | 184 ++++ >> drivers/devfreq/Kconfig | 37 +- >> drivers/devfreq/Makefile | 2 + >> drivers/devfreq/devfreq.c | 120 ++- >> drivers/devfreq/exynos/Makefile | 3 +- >> drivers/devfreq/exynos/exynos-bus.c | 549 ++++++++++ >> drivers/devfreq/exynos/exynos4_bus.c | 1055 -------------------- >> drivers/devfreq/exynos/exynos4_bus.h | 110 -- >> drivers/devfreq/exynos/exynos5_bus.c | 431 -------- >> drivers/devfreq/exynos/exynos_ppmu.c | 119 --- >> drivers/devfreq/exynos/exynos_ppmu.h | 86 -- >> drivers/devfreq/governor.h | 7 + >> drivers/devfreq/governor_passive.c | 109 ++ >> drivers/devfreq/governor_performance.c | 1 + >> drivers/devfreq/governor_powersave.c | 1 + >> drivers/devfreq/governor_simpleondemand.c | 1 + >> drivers/devfreq/governor_userspace.c | 1 + >> include/linux/devfreq.h | 28 + >> 25 files changed, 1958 insertions(+), 1828 deletions(-) >> create mode 100644 Documentation/devicetree/bindings/devfreq/exynos-bus.txt >> create mode 100644 drivers/devfreq/exynos/exynos-bus.c >> delete mode 100644 drivers/devfreq/exynos/exynos4_bus.c >> delete mode 100644 drivers/devfreq/exynos/exynos4_bus.h >> delete mode 100644 drivers/devfreq/exynos/exynos5_bus.c >> delete mode 100644 drivers/devfreq/exynos/exynos_ppmu.c >> delete mode 100644 drivers/devfreq/exynos/exynos_ppmu.h >> create mode 100644 drivers/devfreq/governor_passive.c >> >> -- >> 1.9.1 >> > > I could not get this series to work with my Odroid U3. > > [ 4.602768] input: gpio_keys as /devices/platform/gpio_keys/input/input0 > [ 4.605527] devfreq bus_leftbus: Couldn't update frequency > transition information. > [ 4.607319] devfreq bus_dmc: Couldn't update frequency transition > information. > [ 4.625096] usb 1-3: New USB device found, idVendor=0424, idProduct=3503 This log indicates the problem of 'trats_stat' sysfs entry of devfreq framework during kernel booting. But, this log don't affect the behavior of bus frequency on Odroid-U3. After completing kernel and platform booting, you can check the operation of Bus frequency with follwoing sysfs entry: root@localhost:~# ls -al /sys/class/devfreq total 0 drwxr-xr-x 2 root root 0 Dec 31 17:00 . drwxr-xr-x 44 root root 0 Dec 31 17:00 .. lrwxrwxrwx 1 root root 0 Dec 31 17:00 bus_acp -> ../../devices/platform/bus_acp/devfreq/bus_acp lrwxrwxrwx 1 root root 0 Dec 31 17:00 bus_c2c -> ../../devices/platform/bus_c2c/devfreq/bus_c2c lrwxrwxrwx 1 root root 0 Dec 31 17:00 bus_display -> ../../devices/platform/bus_display/devfreq/bus_display lrwxrwxrwx 1 root root 0 Dec 31 17:00 bus_dmc -> ../../devices/platform/bus_dmc/devfreq/bus_dmc lrwxrwxrwx 1 root root 0 Dec 31 17:00 bus_fsys -> ../../devices/platform/bus_fsys/devfreq/bus_fsys lrwxrwxrwx 1 root root 0 Dec 31 17:00 bus_leftbus -> ../../devices/platform/bus_leftbus/devfreq/bus_leftbus lrwxrwxrwx 1 root root 0 Dec 31 17:00 bus_mfc -> ../../devices/platform/bus_mfc/devfreq/bus_mfc lrwxrwxrwx 1 root root 0 Dec 31 17:00 bus_peri -> ../../devices/platform/bus_peri/devfreq/bus_peri lrwxrwxrwx 1 root root 0 Dec 31 17:00 bus_rightbus -> ../../devices/platform/bus_rightbus/devfreq/bus_rightbus root@localhost:~# cat /sys/class/devfreq/bus_leftbus/trans_stat From : To : 100000000 134000000 160000000 200000000 time(ms) 100000000: 0 0 0 24 2020 134000000: 0 0 0 10 1190 160000000: 0 0 0 0 0 * 200000000: 24 10 0 0 118160 Total transition : 68 Also, when changing the frequency of each bus, exynos-bus.c show the debug message. If you need more detailed information, you could check this log message. Regards, Chanwoo Choi -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
 |