Re: [PATCH 3/3] dt-bindings: exynos-dp: update ports node binding for panel

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Dec 03, 2015 at 06:30:10PM +0900, Inki Dae wrote:
> This patch updates a ports node binding for panel.
> 
> With this, dp node can have a ports node which describes
> a remote endpoint node that can be connected to panel or bridge
> node.
> 
> Signed-off-by: Inki Dae <inki.dae@xxxxxxxxxxx>
> ---
>  .../bindings/display/exynos/exynos_dp.txt          | 28 ++++++++++++++++++----
>  1 file changed, 24 insertions(+), 4 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt b/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
> index 64693f2..15b52cb 100644
> --- a/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
> +++ b/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
> @@ -66,8 +66,15 @@ Optional properties for dp-controller:
>  		Hotplug detect GPIO.
>  			Indicates which GPIO should be used for hotplug
>  			detection
> -	-video interfaces: Device node can contain video interface port
> -			    nodes according to [1].
> +Video interfaces:
> +  Device node can contain video interface port nodes according to [1].
> +  The following are properties specific to those nodes:
> +
> +  endpoint node connected to bridge or panel node:
> +   - remote-endpoint: specifies the endpoint in panel or bridge node.
> +		      This node is required in all kinds of exynos dp
> +		      to represent the connection between dp and bridge
> +		      ,or dp and panel.

Fix your punctuation.

>  
>  [1]: Documentation/devicetree/bindings/media/video-interfaces.txt
>  
> @@ -111,9 +118,22 @@ Board Specific portion:
>  		};
>  
>  		ports {
> -			port@0 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;

You don't need these.

> +
> +			port {
>  				dp_out: endpoint {
> -					remote-endpoint = <&bridge_in>;
> +					remote-endpoint = <&dp_in>;
> +				};
> +			};
> +		};
> +
> +		panel@0 {
> +			reg = <0>;

Drop the @0 and reg as you only have 1.

> +			...
> +			port {
> +				dp_in: endpoint {
> +					remote-endpoint = <&dp_out>;
>  				};
>  			};
>  		};
> -- 
> 1.9.1
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  Powered by Linux