Re: [PATCH v4 2/2] thermal: exynos: Add TMU support for Exynos7 SoC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Lukasz,

On Thu, Jan 29, 2015 at 1:56 PM, Lukasz Majewski <l.majewski@xxxxxxxxxxx> wrote:
> Hi Abhilash,
>
>> Add registers, bit fields and compatible strings for Exynos7 TMU
>> (Thermal Management Unit). Following are a few of the differences
>> in the Exynos7 TMU from earlier SoCs:
>>         - 8 trigger levels
>>         - Different bit offsets and more registers for the rising
>>         and falling thresholds.
>>         - New power down detection bit in the TMU_CONTROL register
>>         which does not update the CURRENT_TEMP0 when tmu power down
>>         is detected.
>>         - Change in bit offset for the NEXT_DATA field of EMUL_CON
>>         register. EMUL_CON register address has also changed.
>>         - INTSTAT and INTCLEAR registers present in earlier SoCs
>>         have been combined into one INTPEND register. The register
>>         address for INTCLEAR and INTPEND is also different.
>>         - Since there are 8 rising/falling interrupts as against
>>         at most 4 in earlier SoCs the INTEN bit offsets are different.
>>         - Multiple probe support which is handled by a TMU_CONTROL1
>>         register (No support for this in the current patch).
>>
>> This patch adds special clock support required only for Exynos7. It
>> also updates the "code_to_temp" prototype as Exynos7 has 9 bit
>> code-temp mapping.
>>
>> Signed-off-by: Abhilash Kesavan <a.kesavan@xxxxxxxxxxx>
>> ---
>> This patch set has been tested on linux next-20150123 with Eduardo's
>> thermal-next branch merged along with the arch-side exynos7 related
>> dts changes applied.
>>
>> Changes since v3:
>> Addressed comments from Lukasz Majewski:
>>       - Added more comments in the code setting the thresholds.
>>       - Split the documentation out into another patch.
>> Changes since v2:
>>       - Rebased on top of Lukasz' latest exynos tmu series (v4).
>>       - Added new exynos7 soc_type.
>> Changes since v1:
>>       - Rebased on top of Lukasz' latest exynos tmu series (v2).
>>       - Added sclk support to patch adding Exynos7 tmu support.
>>       Previously, it was a separate patch.
>>       - Used the SOC type to decide if sclk is present.
>>
>>  drivers/thermal/samsung/exynos_tmu.c |  204
>> ++++++++++++++++++++++++++++++++--
>> drivers/thermal/samsung/exynos_tmu.h |    1 + 2 files changed, 197
>> insertions(+), 8 deletions(-)
>>
>> diff --git a/drivers/thermal/samsung/exynos_tmu.c
>> b/drivers/thermal/samsung/exynos_tmu.c index 852e622..660ff69 100644
>> --- a/drivers/thermal/samsung/exynos_tmu.c
>> +++ b/drivers/thermal/samsung/exynos_tmu.c
>> @@ -119,6 +119,26 @@
>>  #define EXYNOS5440_TMU_TH_RISE4_SHIFT                24
>>  #define EXYNOS5440_EFUSE_SWAP_OFFSET         8
>>
>> +/* Exynos7 specific registers */
>> +#define EXYNOS7_THD_TEMP_RISE7_6             0x50
>> +#define EXYNOS7_THD_TEMP_FALL7_6             0x60
>> +#define EXYNOS7_TMU_REG_INTEN                        0x110
>> +#define EXYNOS7_TMU_REG_INTPEND                      0x118
>> +#define EXYNOS7_TMU_REG_EMUL_CON             0x160
>> +
>> +#define EXYNOS7_TMU_TEMP_MASK                        0x1ff
>> +#define EXYNOS7_PD_DET_EN_SHIFT                      23
>> +#define EXYNOS7_TMU_INTEN_RISE0_SHIFT                0
>> +#define EXYNOS7_TMU_INTEN_RISE1_SHIFT                1
>> +#define EXYNOS7_TMU_INTEN_RISE2_SHIFT                2
>> +#define EXYNOS7_TMU_INTEN_RISE3_SHIFT                3
>> +#define EXYNOS7_TMU_INTEN_RISE4_SHIFT                4
>> +#define EXYNOS7_TMU_INTEN_RISE5_SHIFT                5
>> +#define EXYNOS7_TMU_INTEN_RISE6_SHIFT                6
>> +#define EXYNOS7_TMU_INTEN_RISE7_SHIFT                7
>> +#define EXYNOS7_EMUL_DATA_SHIFT                      7
>> +#define EXYNOS7_EMUL_DATA_MASK                       0x1ff
>> +
>>  #define MCELSIUS     1000
>>  /**
>>   * struct exynos_tmu_data : A structure to hold the private data of
>> the TMU @@ -133,6 +153,7 @@
>>   * @lock: lock to implement synchronization.
>>   * @clk: pointer to the clock structure.
>>   * @clk_sec: pointer to the clock structure for accessing the
>> base_second.
>> + * @sclk: pointer to the clock structure for accessing the tmu
>> special clk.
>>   * @temp_error1: fused value of the first point trim.
>>   * @temp_error2: fused value of the second point trim.
>>   * @regulator: pointer to the TMU regulator structure.
>> @@ -152,8 +173,8 @@ struct exynos_tmu_data {
>>       enum soc_type soc;
>>       struct work_struct irq_work;
>>       struct mutex lock;
>> -     struct clk *clk, *clk_sec;
>> -     u8 temp_error1, temp_error2;
>> +     struct clk *clk, *clk_sec, *sclk;
>> +     u16 temp_error1, temp_error2;
>>       struct regulator *regulator;
>>       struct thermal_zone_device *tzd;
>>
>> @@ -223,7 +244,7 @@ static int temp_to_code(struct exynos_tmu_data
>> *data, u8 temp)
>>   * Calculate a temperature value from a temperature code.
>>   * The unit of the temperature is degree Celsius.
>>   */
>> -static int code_to_temp(struct exynos_tmu_data *data, u8 temp_code)
>> +static int code_to_temp(struct exynos_tmu_data *data, u16 temp_code)
>>  {
>>       struct exynos_tmu_platform_data *pdata = data->pdata;
>>       int temp;
>> @@ -513,6 +534,84 @@ static int exynos5440_tmu_initialize(struct
>> platform_device *pdev) return ret;
>>  }
>>
>> +static int exynos7_tmu_initialize(struct platform_device *pdev)
>> +{
>> +     struct exynos_tmu_data *data = platform_get_drvdata(pdev);
>> +     struct thermal_zone_device *tz = data->tzd;
>> +     struct exynos_tmu_platform_data *pdata = data->pdata;
>> +     unsigned int status, trim_info;
>> +     unsigned int rising_threshold = 0, falling_threshold = 0;
>> +     int ret = 0, threshold_code, i;
>> +     unsigned long temp, temp_hist;
>> +     unsigned int reg_off, bit_off;
>> +
>> +     status = readb(data->base + EXYNOS_TMU_REG_STATUS);
>> +     if (!status) {
>> +             ret = -EBUSY;
>> +             goto out;
>> +     }
>> +
>> +     trim_info = readl(data->base + EXYNOS_TMU_REG_TRIMINFO);
>> +
>> +     data->temp_error1 = trim_info & EXYNOS7_TMU_TEMP_MASK;
>> +     if (!data->temp_error1 ||
>> +        (pdata->min_efuse_value > data->temp_error1) ||
>> +        (data->temp_error1 > pdata->max_efuse_value))
>> +             data->temp_error1 = pdata->efuse_value &
>> EXYNOS_TMU_TEMP_MASK; +
>> +     /* Write temperature code for rising and falling threshold */
>> +     for (i = (of_thermal_get_ntrips(tz) - 1); i >= 0; i--) {
>> +             /*
>> +              * On exynos7 there are 4 rising and 4 falling
>> threshold
>> +              * registers (0x50-0x5c and 0x60-0x6c respectively).
>> Each
>> +              * register holds the value of two threshold levels
>> (at bit
>> +              * offsets 0 and 16). Based on the fact that there
>> are atmost
>> +              * eight possible trigger levels, calculate the
>> register and
>> +              * bit offsets where the threshold levels are to be
>> written.
>> +              *
>> +              * e.g. EXYNOS7_THD_TEMP_RISE7_6 (0x50)
>> +              * [24:16] - Threshold level 7
>> +              * [8:0] - Threshold level 6
>> +              * e.g. EXYNOS7_THD_TEMP_RISE5_4 (0x54)
>> +              * [24:16] - Threshold level 5
>> +              * [8:0] - Threshold level 4
>> +              *
>> +              * and similarly for falling thresholds.
>> +              *
>> +              * Based on the above, calculate the register and
>> bit offsets
>> +              * for rising/falling threshold levels and populate
>> them.
>> +              */
>> +             reg_off = ((7 - i) / 2) * 4;
>> +             bit_off = ((8 - i) % 2);
>> +
>> +             tz->ops->get_trip_temp(tz, i, &temp);
>> +             temp /= MCELSIUS;
>> +
>> +             tz->ops->get_trip_hyst(tz, i, &temp_hist);
>> +             temp_hist = temp - (temp_hist / MCELSIUS);
>> +
>> +             /* Set 9-bit temperature code for rising threshold
>> levels */
>> +             threshold_code = temp_to_code(data, temp);
>> +             rising_threshold = readl(data->base +
>> +                     EXYNOS7_THD_TEMP_RISE7_6 + reg_off);
>> +             rising_threshold &= ~(EXYNOS7_TMU_TEMP_MASK << (16 *
>> bit_off));
>> +             rising_threshold |= threshold_code << (16 * bit_off);
>> +             writel(rising_threshold,
>> +                    data->base + EXYNOS7_THD_TEMP_RISE7_6 +
>> reg_off); +
>> +             /* Set 9-bit temperature code for falling threshold
>> levels */
>> +             threshold_code = temp_to_code(data, temp_hist);
>> +             falling_threshold &= ~(EXYNOS7_TMU_TEMP_MASK << (16
>> * bit_off));
>> +             falling_threshold |= threshold_code << (16 *
>> bit_off);
>> +             writel(falling_threshold,
>> +                    data->base + EXYNOS7_THD_TEMP_FALL7_6 +
>> reg_off);
>> +     }
>> +
>> +     data->tmu_clear_irqs(data);
>> +out:
>> +     return ret;
>> +}
>> +
>>  static void exynos4210_tmu_control(struct platform_device *pdev,
>> bool on) {
>>       struct exynos_tmu_data *data = platform_get_drvdata(pdev);
>> @@ -573,6 +672,46 @@ static void exynos5440_tmu_control(struct
>> platform_device *pdev, bool on) writel(con, data->base +
>> EXYNOS5440_TMU_S0_7_CTRL); }
>>
>> +static void exynos7_tmu_control(struct platform_device *pdev, bool
>> on) +{
>> +     struct exynos_tmu_data *data = platform_get_drvdata(pdev);
>> +     struct thermal_zone_device *tz = data->tzd;
>> +     unsigned int con, interrupt_en;
>> +
>> +     con = get_con_reg(data, readl(data->base +
>> EXYNOS_TMU_REG_CONTROL)); +
>> +     if (on) {
>> +             con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT);
>> +             interrupt_en =
>> +                     (of_thermal_is_trip_valid(tz, 7)
>> +                     << EXYNOS7_TMU_INTEN_RISE7_SHIFT) |
>> +                     (of_thermal_is_trip_valid(tz, 6)
>> +                     << EXYNOS7_TMU_INTEN_RISE6_SHIFT) |
>> +                     (of_thermal_is_trip_valid(tz, 5)
>> +                     << EXYNOS7_TMU_INTEN_RISE5_SHIFT) |
>> +                     (of_thermal_is_trip_valid(tz, 4)
>> +                     << EXYNOS7_TMU_INTEN_RISE4_SHIFT) |
>> +                     (of_thermal_is_trip_valid(tz, 3)
>> +                     << EXYNOS7_TMU_INTEN_RISE3_SHIFT) |
>> +                     (of_thermal_is_trip_valid(tz, 2)
>> +                     << EXYNOS7_TMU_INTEN_RISE2_SHIFT) |
>> +                     (of_thermal_is_trip_valid(tz, 1)
>> +                     << EXYNOS7_TMU_INTEN_RISE1_SHIFT) |
>> +                     (of_thermal_is_trip_valid(tz, 0)
>> +                     << EXYNOS7_TMU_INTEN_RISE0_SHIFT);
>> +
>> +             interrupt_en |=
>> +                     interrupt_en << EXYNOS_TMU_INTEN_FALL0_SHIFT;
>> +     } else {
>> +             con &= ~(1 << EXYNOS_TMU_CORE_EN_SHIFT);
>> +             interrupt_en = 0; /* Disable all interrupts */
>> +     }
>> +     con |= 1 << EXYNOS7_PD_DET_EN_SHIFT;
>> +
>> +     writel(interrupt_en, data->base + EXYNOS7_TMU_REG_INTEN);
>> +     writel(con, data->base + EXYNOS_TMU_REG_CONTROL);
>> +}
>> +
>>  static int exynos_get_temp(void *p, long *temp)
>>  {
>>       struct exynos_tmu_data *data = p;
>> @@ -602,9 +741,19 @@ static u32 get_emul_con_reg(struct
>> exynos_tmu_data *data, unsigned int val, val &=
>> ~(EXYNOS_EMUL_TIME_MASK << EXYNOS_EMUL_TIME_SHIFT); val |=
>> (EXYNOS_EMUL_TIME << EXYNOS_EMUL_TIME_SHIFT); }
>> -             val &= ~(EXYNOS_EMUL_DATA_MASK <<
>> EXYNOS_EMUL_DATA_SHIFT);
>> -             val |= (temp_to_code(data, temp) <<
>> EXYNOS_EMUL_DATA_SHIFT) |
>> -                     EXYNOS_EMUL_ENABLE;
>> +             if (data->soc == SOC_ARCH_EXYNOS7) {
>> +                     val &= ~(EXYNOS7_EMUL_DATA_MASK <<
>> +                             EXYNOS7_EMUL_DATA_SHIFT);
>> +                     val |= (temp_to_code(data, temp) <<
>> +                             EXYNOS7_EMUL_DATA_SHIFT) |
>> +                             EXYNOS_EMUL_ENABLE;
>> +             } else {
>> +                     val &= ~(EXYNOS_EMUL_DATA_MASK <<
>> +                             EXYNOS_EMUL_DATA_SHIFT);
>> +                     val |= (temp_to_code(data, temp) <<
>> +                             EXYNOS_EMUL_DATA_SHIFT) |
>> +                             EXYNOS_EMUL_ENABLE;
>> +             }
>>       } else {
>>               val &= ~EXYNOS_EMUL_ENABLE;
>>       }
>> @@ -620,6 +769,8 @@ static void exynos4412_tmu_set_emulation(struct
>> exynos_tmu_data *data,
>>       if (data->soc == SOC_ARCH_EXYNOS5260)
>>               emul_con = EXYNOS5260_EMUL_CON;
>> +     else if (data->soc == SOC_ARCH_EXYNOS7)
>> +             emul_con = EXYNOS7_TMU_REG_EMUL_CON;
>>       else
>>               emul_con = EXYNOS_EMUL_CON;
>>
>> @@ -683,6 +834,12 @@ static int exynos5440_tmu_read(struct
>> exynos_tmu_data *data) return readb(data->base +
>> EXYNOS5440_TMU_S0_7_TEMP); }
>>
>> +static int exynos7_tmu_read(struct exynos_tmu_data *data)
>> +{
>> +     return readw(data->base + EXYNOS_TMU_REG_CURRENT_TEMP) &
>> +             EXYNOS7_TMU_TEMP_MASK;
>> +}
>> +
>>  static void exynos_tmu_work(struct work_struct *work)
>>  {
>>       struct exynos_tmu_data *data = container_of(work,
>> @@ -721,6 +878,8 @@ static void exynos4210_tmu_clear_irqs(struct
>> exynos_tmu_data *data) if (data->soc == SOC_ARCH_EXYNOS5260) {
>>               tmu_intstat = EXYNOS5260_TMU_REG_INTSTAT;
>>               tmu_intclear = EXYNOS5260_TMU_REG_INTCLEAR;
>> +     } else if (data->soc == SOC_ARCH_EXYNOS7) {
>> +             tmu_intstat = tmu_intclear = EXYNOS7_TMU_REG_INTPEND;
>>       } else {
>>               tmu_intstat = EXYNOS_TMU_REG_INTSTAT;
>>               tmu_intclear = EXYNOS_TMU_REG_INTCLEAR;
>> @@ -782,6 +941,9 @@ static const struct of_device_id
>> exynos_tmu_match[] = { {
>>               .compatible = "samsung,exynos5440-tmu",
>>       },
>> +     {
>> +             .compatible = "samsung,exynos7-tmu",
>> +     },
>>       {},
>>  };
>>  MODULE_DEVICE_TABLE(of, exynos_tmu_match);
>> @@ -805,6 +967,8 @@ static int exynos_of_get_soc_type(struct
>> device_node *np) return SOC_ARCH_EXYNOS5420_TRIMINFO;
>>       else if (of_device_is_compatible(np,
>> "samsung,exynos5440-tmu")) return SOC_ARCH_EXYNOS5440;
>> +     else if (of_device_is_compatible(np, "samsung,exynos7-tmu"))
>> +             return SOC_ARCH_EXYNOS7;
>>
>>       return -EINVAL;
>>  }
>> @@ -928,6 +1092,13 @@ static int exynos_map_dt_data(struct
>> platform_device *pdev) data->tmu_set_emulation =
>> exynos5440_tmu_set_emulation; data->tmu_clear_irqs =
>> exynos5440_tmu_clear_irqs; break;
>> +     case SOC_ARCH_EXYNOS7:
>> +             data->tmu_initialize = exynos7_tmu_initialize;
>> +             data->tmu_control = exynos7_tmu_control;
>> +             data->tmu_read = exynos7_tmu_read;
>> +             data->tmu_set_emulation =
>> exynos4412_tmu_set_emulation;
>> +             data->tmu_clear_irqs = exynos4210_tmu_clear_irqs;
>> +             break;
>>       default:
>>               dev_err(&pdev->dev, "Platform not supported\n");
>>               return -EINVAL;
>> @@ -1018,21 +1189,37 @@ static int exynos_tmu_probe(struct
>> platform_device *pdev) goto err_clk_sec;
>>       }
>>
>> +     if (data->soc == SOC_ARCH_EXYNOS7) {
>> +             data->sclk = devm_clk_get(&pdev->dev, "tmu_sclk");
>> +             if (IS_ERR(data->sclk)) {
>> +                     dev_err(&pdev->dev, "Failed to get sclk\n");
>> +                     goto err_clk;
>> +             } else {
>> +                     ret = clk_prepare_enable(data->sclk);
>> +                     if (ret) {
>> +                             dev_err(&pdev->dev, "Failed to
>> enable sclk\n");
>> +                             goto err_clk;
>> +                     }
>> +             }
>> +     }
>> +
>>       ret = exynos_tmu_initialize(pdev);
>>       if (ret) {
>>               dev_err(&pdev->dev, "Failed to initialize TMU\n");
>> -             goto err_clk;
>> +             goto err_sclk;
>>       }
>>
>>       ret = devm_request_irq(&pdev->dev, data->irq, exynos_tmu_irq,
>>               IRQF_TRIGGER_RISING | IRQF_SHARED,
>> dev_name(&pdev->dev), data); if (ret) {
>>               dev_err(&pdev->dev, "Failed to request irq: %d\n",
>> data->irq);
>> -             goto err_clk;
>> +             goto err_sclk;
>>       }
>>
>>       exynos_tmu_control(pdev, true);
>>       return 0;
>> +err_sclk:
>> +     clk_disable_unprepare(data->sclk);
>>  err_clk:
>>       clk_unprepare(data->clk);
>>  err_clk_sec:
>> @@ -1052,6 +1239,7 @@ static int exynos_tmu_remove(struct
>> platform_device *pdev) thermal_zone_of_sensor_unregister(&pdev->dev,
>> tzd); exynos_tmu_control(pdev, false);
>>
>> +     clk_disable_unprepare(data->sclk);
>>       clk_unprepare(data->clk);
>>       if (!IS_ERR(data->clk_sec))
>>               clk_unprepare(data->clk_sec);
>> diff --git a/drivers/thermal/samsung/exynos_tmu.h
>> b/drivers/thermal/samsung/exynos_tmu.h index 9f9b1b8..4d71ec6 100644
>> --- a/drivers/thermal/samsung/exynos_tmu.h
>> +++ b/drivers/thermal/samsung/exynos_tmu.h
>> @@ -34,6 +34,7 @@ enum soc_type {
>>       SOC_ARCH_EXYNOS5420,
>>       SOC_ARCH_EXYNOS5420_TRIMINFO,
>>       SOC_ARCH_EXYNOS5440,
>> +     SOC_ARCH_EXYNOS7,
>>  };
>>
>>  /**
>
>
> Acked-by: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
> Tested-by: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
>
> Test HW: Odroid-U3 (Exynos4412)
>
> linux-soc-thermal/fixes
> SHA1: 252454f5cbda2c6b40c5d36f58cac2938437b85d

Thanks a lot for reviewing and testing these two patches.

Regards,
Abhilash
>
> --
> Best regards,
>
> Lukasz Majewski
>
> Samsung R&D Institute Poland (SRPOL) | Linux Platform Group
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  Powered by Linux