Add registers, bit fields and compatible strings for Exynos7 TMU
(Thermal Management Unit). Following are a few of the differences
in the Exynos7 TMU from earlier SoCs:
- 8 trigger levels
- Different bit offsets and more registers for the rising
and falling thresholds.
- New power down detection bit in the TMU_CONTROL register
which does not update the CURRENT_TEMP0 when tmu power down
is detected.
- Change in bit offset for the NEXT_DATA field of EMUL_CON
register. EMUL_CON register address has also changed.
- INTSTAT and INTCLEAR registers present in earlier SoCs
have been combined into one INTPEND register. The register
address for INTCLEAR and INTPEND is also different.
- Since there are 8 rising/falling interrupts as against
at most 4 in earlier SoCs the INTEN bit offsets are different.
- Multiple probe support which is handled by a TMU_CONTROL1
register (No support for this in the current patch).
This patch adds special clock support required only for Exynos7. It
also updates the "code_to_temp" prototype as Exynos7 has 9 bit
code-temp mapping.
Signed-off-by: Abhilash Kesavan <a.kesavan@xxxxxxxxxxx>
---
This patch set has been tested on linux next-20150123 with Eduardo's
thermal-next branch merged along with the arch-side exynos7 related
dts changes applied.
Changes since v3:
Addressed comments from Lukasz Majewski:
- Added more comments in the code setting the thresholds.
- Split the documentation out into another patch.
Changes since v2:
- Rebased on top of Lukasz' latest exynos tmu series (v4).
- Added new exynos7 soc_type.
Changes since v1:
- Rebased on top of Lukasz' latest exynos tmu series (v2).
- Added sclk support to patch adding Exynos7 tmu support.
Previously, it was a separate patch.
- Used the SOC type to decide if sclk is present.
drivers/thermal/samsung/exynos_tmu.c | 204 ++++++++++++++++++++++++++++++++--
drivers/thermal/samsung/exynos_tmu.h | 1 +
2 files changed, 197 insertions(+), 8 deletions(-)
diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
index 852e622..660ff69 100644
--- a/drivers/thermal/samsung/exynos_tmu.c
+++ b/drivers/thermal/samsung/exynos_tmu.c
@@ -119,6 +119,26 @@
#define EXYNOS5440_TMU_TH_RISE4_SHIFT 24
#define EXYNOS5440_EFUSE_SWAP_OFFSET 8
+/* Exynos7 specific registers */
+#define EXYNOS7_THD_TEMP_RISE7_6 0x50
+#define EXYNOS7_THD_TEMP_FALL7_6 0x60
+#define EXYNOS7_TMU_REG_INTEN 0x110
+#define EXYNOS7_TMU_REG_INTPEND 0x118
+#define EXYNOS7_TMU_REG_EMUL_CON 0x160
+
+#define EXYNOS7_TMU_TEMP_MASK 0x1ff
+#define EXYNOS7_PD_DET_EN_SHIFT 23
+#define EXYNOS7_TMU_INTEN_RISE0_SHIFT 0
+#define EXYNOS7_TMU_INTEN_RISE1_SHIFT 1
+#define EXYNOS7_TMU_INTEN_RISE2_SHIFT 2
+#define EXYNOS7_TMU_INTEN_RISE3_SHIFT 3
+#define EXYNOS7_TMU_INTEN_RISE4_SHIFT 4
+#define EXYNOS7_TMU_INTEN_RISE5_SHIFT 5
+#define EXYNOS7_TMU_INTEN_RISE6_SHIFT 6
+#define EXYNOS7_TMU_INTEN_RISE7_SHIFT 7
+#define EXYNOS7_EMUL_DATA_SHIFT 7
+#define EXYNOS7_EMUL_DATA_MASK 0x1ff
+
#define MCELSIUS 1000
/**
* struct exynos_tmu_data : A structure to hold the private data of the TMU
@@ -133,6 +153,7 @@
* @lock: lock to implement synchronization.
* @clk: pointer to the clock structure.
* @clk_sec: pointer to the clock structure for accessing the base_second.
+ * @sclk: pointer to the clock structure for accessing the tmu special clk.
* @temp_error1: fused value of the first point trim.
* @temp_error2: fused value of the second point trim.
* @regulator: pointer to the TMU regulator structure.
@@ -152,8 +173,8 @@ struct exynos_tmu_data {
enum soc_type soc;
struct work_struct irq_work;
struct mutex lock;
- struct clk *clk, *clk_sec;
- u8 temp_error1, temp_error2;
+ struct clk *clk, *clk_sec, *sclk;
+ u16 temp_error1, temp_error2;
struct regulator *regulator;
struct thermal_zone_device *tzd;
@@ -223,7 +244,7 @@ static int temp_to_code(struct exynos_tmu_data *data, u8 temp)
* Calculate a temperature value from a temperature code.
* The unit of the temperature is degree Celsius.
*/
-static int code_to_temp(struct exynos_tmu_data *data, u8 temp_code)
+static int code_to_temp(struct exynos_tmu_data *data, u16 temp_code)
{
struct exynos_tmu_platform_data *pdata = data->pdata;
int temp;
@@ -513,6 +534,84 @@ static int exynos5440_tmu_initialize(struct platform_device *pdev)
return ret;
}
+static int exynos7_tmu_initialize(struct platform_device *pdev)
+{
+ struct exynos_tmu_data *data = platform_get_drvdata(pdev);
+ struct thermal_zone_device *tz = data->tzd;
+ struct exynos_tmu_platform_data *pdata = data->pdata;
+ unsigned int status, trim_info;
+ unsigned int rising_threshold = 0, falling_threshold = 0;
+ int ret = 0, threshold_code, i;
+ unsigned long temp, temp_hist;
+ unsigned int reg_off, bit_off;
+
+ status = readb(data->base + EXYNOS_TMU_REG_STATUS);
+ if (!status) {
+ ret = -EBUSY;
+ goto out;
+ }
+
+ trim_info = readl(data->base + EXYNOS_TMU_REG_TRIMINFO);
+
+ data->temp_error1 = trim_info & EXYNOS7_TMU_TEMP_MASK;
+ if (!data->temp_error1 ||
+ (pdata->min_efuse_value > data->temp_error1) ||
+ (data->temp_error1 > pdata->max_efuse_value))
+ data->temp_error1 = pdata->efuse_value & EXYNOS_TMU_TEMP_MASK;
+
+ /* Write temperature code for rising and falling threshold */
+ for (i = (of_thermal_get_ntrips(tz) - 1); i >= 0; i--) {
+ /*
+ * On exynos7 there are 4 rising and 4 falling threshold
+ * registers (0x50-0x5c and 0x60-0x6c respectively). Each
+ * register holds the value of two threshold levels (at bit
+ * offsets 0 and 16). Based on the fact that there are atmost
+ * eight possible trigger levels, calculate the register and
+ * bit offsets where the threshold levels are to be written.
+ *
+ * e.g. EXYNOS7_THD_TEMP_RISE7_6 (0x50)
+ * [24:16] - Threshold level 7
+ * [8:0] - Threshold level 6
+ * e.g. EXYNOS7_THD_TEMP_RISE5_4 (0x54)
+ * [24:16] - Threshold level 5
+ * [8:0] - Threshold level 4
+ *
+ * and similarly for falling thresholds.
+ *
+ * Based on the above, calculate the register and bit offsets
+ * for rising/falling threshold levels and populate them.
+ */
+ reg_off = ((7 - i) / 2) * 4;
+ bit_off = ((8 - i) % 2);
+
+ tz->ops->get_trip_temp(tz, i, &temp);
+ temp /= MCELSIUS;
+
+ tz->ops->get_trip_hyst(tz, i, &temp_hist);
+ temp_hist = temp - (temp_hist / MCELSIUS);
+
+ /* Set 9-bit temperature code for rising threshold levels */
+ threshold_code = temp_to_code(data, temp);
+ rising_threshold = readl(data->base +
+ EXYNOS7_THD_TEMP_RISE7_6 + reg_off);
+ rising_threshold &= ~(EXYNOS7_TMU_TEMP_MASK << (16 * bit_off));
+ rising_threshold |= threshold_code << (16 * bit_off);
+ writel(rising_threshold,
+ data->base + EXYNOS7_THD_TEMP_RISE7_6 + reg_off);
+
+ /* Set 9-bit temperature code for falling threshold levels */
+ threshold_code = temp_to_code(data, temp_hist);
+ falling_threshold &= ~(EXYNOS7_TMU_TEMP_MASK << (16 * bit_off));
+ falling_threshold |= threshold_code << (16 * bit_off);
+ writel(falling_threshold,
+ data->base + EXYNOS7_THD_TEMP_FALL7_6 + reg_off);
+ }
+
+ data->tmu_clear_irqs(data);
+out:
+ return ret;
+}
+
static void exynos4210_tmu_control(struct platform_device *pdev, bool on)
{
struct exynos_tmu_data *data = platform_get_drvdata(pdev);
@@ -573,6 +672,46 @@ static void exynos5440_tmu_control(struct platform_device *pdev, bool on)
writel(con, data->base + EXYNOS5440_TMU_S0_7_CTRL);
}
+static void exynos7_tmu_control(struct platform_device *pdev, bool on)
+{
+ struct exynos_tmu_data *data = platform_get_drvdata(pdev);
+ struct thermal_zone_device *tz = data->tzd;
+ unsigned int con, interrupt_en;
+
+ con = get_con_reg(data, readl(data->base + EXYNOS_TMU_REG_CONTROL));
+
+ if (on) {
+ con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT);
+ interrupt_en =
+ (of_thermal_is_trip_valid(tz, 7)
+ << EXYNOS7_TMU_INTEN_RISE7_SHIFT) |
+ (of_thermal_is_trip_valid(tz, 6)
+ << EXYNOS7_TMU_INTEN_RISE6_SHIFT) |
+ (of_thermal_is_trip_valid(tz, 5)
+ << EXYNOS7_TMU_INTEN_RISE5_SHIFT) |
+ (of_thermal_is_trip_valid(tz, 4)
+ << EXYNOS7_TMU_INTEN_RISE4_SHIFT) |
+ (of_thermal_is_trip_valid(tz, 3)
+ << EXYNOS7_TMU_INTEN_RISE3_SHIFT) |
+ (of_thermal_is_trip_valid(tz, 2)
+ << EXYNOS7_TMU_INTEN_RISE2_SHIFT) |
+ (of_thermal_is_trip_valid(tz, 1)
+ << EXYNOS7_TMU_INTEN_RISE1_SHIFT) |
+ (of_thermal_is_trip_valid(tz, 0)
+ << EXYNOS7_TMU_INTEN_RISE0_SHIFT);
+
+ interrupt_en |=
+ interrupt_en << EXYNOS_TMU_INTEN_FALL0_SHIFT;
+ } else {
+ con &= ~(1 << EXYNOS_TMU_CORE_EN_SHIFT);
+ interrupt_en = 0; /* Disable all interrupts */
+ }
+ con |= 1 << EXYNOS7_PD_DET_EN_SHIFT;
+
+ writel(interrupt_en, data->base + EXYNOS7_TMU_REG_INTEN);
+ writel(con, data->base + EXYNOS_TMU_REG_CONTROL);
+}
+
static int exynos_get_temp(void *p, long *temp)
{
struct exynos_tmu_data *data = p;
@@ -602,9 +741,19 @@ static u32 get_emul_con_reg(struct exynos_tmu_data *data, unsigned int val,
val &= ~(EXYNOS_EMUL_TIME_MASK << EXYNOS_EMUL_TIME_SHIFT);
val |= (EXYNOS_EMUL_TIME << EXYNOS_EMUL_TIME_SHIFT);
}
- val &= ~(EXYNOS_EMUL_DATA_MASK << EXYNOS_EMUL_DATA_SHIFT);
- val |= (temp_to_code(data, temp) << EXYNOS_EMUL_DATA_SHIFT) |
- EXYNOS_EMUL_ENABLE;
+ if (data->soc == SOC_ARCH_EXYNOS7) {
+ val &= ~(EXYNOS7_EMUL_DATA_MASK <<
+ EXYNOS7_EMUL_DATA_SHIFT);
+ val |= (temp_to_code(data, temp) <<
+ EXYNOS7_EMUL_DATA_SHIFT) |
+ EXYNOS_EMUL_ENABLE;
+ } else {
+ val &= ~(EXYNOS_EMUL_DATA_MASK <<
+ EXYNOS_EMUL_DATA_SHIFT);
+ val |= (temp_to_code(data, temp) <<
+ EXYNOS_EMUL_DATA_SHIFT) |
+ EXYNOS_EMUL_ENABLE;
+ }
} else {
val &= ~EXYNOS_EMUL_ENABLE;
}
@@ -620,6 +769,8 @@ static void exynos4412_tmu_set_emulation(struct exynos_tmu_data *data,
if (data->soc == SOC_ARCH_EXYNOS5260)
emul_con = EXYNOS5260_EMUL_CON;
+ else if (data->soc == SOC_ARCH_EXYNOS7)
+ emul_con = EXYNOS7_TMU_REG_EMUL_CON;
else
emul_con = EXYNOS_EMUL_CON;
@@ -683,6 +834,12 @@ static int exynos5440_tmu_read(struct exynos_tmu_data *data)
return readb(data->base + EXYNOS5440_TMU_S0_7_TEMP);
}
+static int exynos7_tmu_read(struct exynos_tmu_data *data)
+{
+ return readw(data->base + EXYNOS_TMU_REG_CURRENT_TEMP) &
+ EXYNOS7_TMU_TEMP_MASK;
+}
+
static void exynos_tmu_work(struct work_struct *work)
{
struct exynos_tmu_data *data = container_of(work,
@@ -721,6 +878,8 @@ static void exynos4210_tmu_clear_irqs(struct exynos_tmu_data *data)
if (data->soc == SOC_ARCH_EXYNOS5260) {
tmu_intstat = EXYNOS5260_TMU_REG_INTSTAT;
tmu_intclear = EXYNOS5260_TMU_REG_INTCLEAR;
+ } else if (data->soc == SOC_ARCH_EXYNOS7) {
+ tmu_intstat = tmu_intclear = EXYNOS7_TMU_REG_INTPEND;
} else {
tmu_intstat = EXYNOS_TMU_REG_INTSTAT;
tmu_intclear = EXYNOS_TMU_REG_INTCLEAR;
@@ -782,6 +941,9 @@ static const struct of_device_id exynos_tmu_match[] = {
{
.compatible = "samsung,exynos5440-tmu",
},
+ {
+ .compatible = "samsung,exynos7-tmu",
+ },
{},
};
MODULE_DEVICE_TABLE(of, exynos_tmu_match);
@@ -805,6 +967,8 @@ static int exynos_of_get_soc_type(struct device_node *np)
return SOC_ARCH_EXYNOS5420_TRIMINFO;
else if (of_device_is_compatible(np, "samsung,exynos5440-tmu"))
return SOC_ARCH_EXYNOS5440;
+ else if (of_device_is_compatible(np, "samsung,exynos7-tmu"))
+ return SOC_ARCH_EXYNOS7;
return -EINVAL;
}
@@ -928,6 +1092,13 @@ static int exynos_map_dt_data(struct platform_device *pdev)
data->tmu_set_emulation = exynos5440_tmu_set_emulation;
data->tmu_clear_irqs = exynos5440_tmu_clear_irqs;
break;
+ case SOC_ARCH_EXYNOS7:
+ data->tmu_initialize = exynos7_tmu_initialize;
+ data->tmu_control = exynos7_tmu_control;
+ data->tmu_read = exynos7_tmu_read;
+ data->tmu_set_emulation = exynos4412_tmu_set_emulation;
+ data->tmu_clear_irqs = exynos4210_tmu_clear_irqs;
+ break;
default:
dev_err(&pdev->dev, "Platform not supported\n");
return -EINVAL;
@@ -1018,21 +1189,37 @@ static int exynos_tmu_probe(struct platform_device *pdev)
goto err_clk_sec;
}
+ if (data->soc == SOC_ARCH_EXYNOS7) {
+ data->sclk = devm_clk_get(&pdev->dev, "tmu_sclk");
+ if (IS_ERR(data->sclk)) {
+ dev_err(&pdev->dev, "Failed to get sclk\n");
+ goto err_clk;
+ } else {
+ ret = clk_prepare_enable(data->sclk);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to enable sclk\n");
+ goto err_clk;
+ }
+ }
+ }
+
ret = exynos_tmu_initialize(pdev);
if (ret) {
dev_err(&pdev->dev, "Failed to initialize TMU\n");
- goto err_clk;
+ goto err_sclk;
}
ret = devm_request_irq(&pdev->dev, data->irq, exynos_tmu_irq,
IRQF_TRIGGER_RISING | IRQF_SHARED, dev_name(&pdev->dev), data);
if (ret) {
dev_err(&pdev->dev, "Failed to request irq: %d\n", data->irq);
- goto err_clk;
+ goto err_sclk;
}
exynos_tmu_control(pdev, true);
return 0;
+err_sclk:
+ clk_disable_unprepare(data->sclk);
err_clk:
clk_unprepare(data->clk);
err_clk_sec:
@@ -1052,6 +1239,7 @@ static int exynos_tmu_remove(struct platform_device *pdev)
thermal_zone_of_sensor_unregister(&pdev->dev, tzd);
exynos_tmu_control(pdev, false);
+ clk_disable_unprepare(data->sclk);
clk_unprepare(data->clk);
if (!IS_ERR(data->clk_sec))
clk_unprepare(data->clk_sec);
diff --git a/drivers/thermal/samsung/exynos_tmu.h b/drivers/thermal/samsung/exynos_tmu.h
index 9f9b1b8..4d71ec6 100644
--- a/drivers/thermal/samsung/exynos_tmu.h
+++ b/drivers/thermal/samsung/exynos_tmu.h
@@ -34,6 +34,7 @@ enum soc_type {
SOC_ARCH_EXYNOS5420,
SOC_ARCH_EXYNOS5420_TRIMINFO,
SOC_ARCH_EXYNOS5440,
+ SOC_ARCH_EXYNOS7,
};
/**
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
