Hi Eduardo,
> On Fri, Jan 23, 2015 at 01:09:53PM +0100, Lukasz Majewski wrote:
> > 1. Introduction
> >
> > Following patches aim to clean up the current implementation of the
> > thermal framework on Exynos devices.
> >
> > The main goal was to use a generic code for reading thermal
> > configuration (of-thermal.c). Due to that redundant
> > exynos_thermal_common.[h|c] files were removed.
> >
> > Around 400 lines of code (LOC) were removed directly by this patch,
> > which is around 20% of the Exynos thermal code base.
> >
> > This work should NOT bring any functional changes to Exynos thermal
> > subsystem.
> >
> > 2. Patch-set structure
> >
> > Then the cpu_cooling functionality has been preserved to allow
> > cooling devices by reducing operating frequency. Definition of trip
> > points and cpufreq's cooling properties were moved to device tree.
> >
> > Then the rework of the way in which configuration data is provided
> > to the Exynos thermal subsystem was performed. Now device tree is
> > used for configuration.
> >
> > 3. Dead code removal
> >
> > Thermal support for some SoCs, previously available in the
> > exynos_tmu_data.c file, was removed since, as of (almost) 3.19-rc3,
> > they didn't have TMU bindings.
> >
> > Moreover, support for cpu_cooling devices was preserved only on
> > those SoCs which had available and working cpufreq driver.
> >
> > 4. Testing
> >
> > Test devices:
> > - Exynos4210 - Trats (TMU zone + cpu_cooling)
> > - Exynos4412 - Trats2/Odroid U3 (TMU zone + cpu_cooling)
> > - Exynos5250 - Arndale (TMU zone + cpu_cooling)
> > - Exynos5420 - Arndale-octa (only TMU zones)
> >
> > Unfortunately, I don't posses Exynos5440 for testing. Its
> > functionality has been preserved in the code, but not tested on the
> > hardware. I would be grateful for help in testing.
> >
> >
> > 5. This work apply on the following tree:
> >
> > kernel.org: 'linux-soc-thermal/next' - Eduardo Velentin's tree
> > SHA1: 1813d80874699145f04af6b05ebab0a6419001fb
> >
> >
> > Lukasz Majewski (18):
>
> I have applied the following patches to my -fixes branch (for next rc
> cycle)
>
> > thermal: exynos: cosmetic: Correct comment format
> > thermal: exynos: Provide thermal_exynos.h file to be included in
> > device tree files
> > thermal: exynos: Modify exynos thermal code to use device tree
> > for cpu cooling configuration
> > cpufreq: exynos: Use device tree to determine if cpufreq cooling
> > should be registered
> > dts: Documentation: Extending documentation entry for
> > exynos-thermal dts: Documentation: Update exynos-thermal.txt
> > example for Exynos5440 thermal: samsung: core: Exynos TMU rework to
> > use device tree for configuration
> > thermal: exynos: Remove exynos_thermal_common.[c|h] files
> > thermal: exynos: Remove exynos_tmu_data.c file
By some mishap the last patch "thermal: exynos: Remove
exynos_tmu_data.c file" was not applied to neither
linux-soc-thermal/next nor linux-soc-thermal/fixes.
Eduardo, could you apply it?
>
> The patches below should go via platform tree:
>
> > arm: dts: trats: Enable TMU on the Exynos4210 trats device
> > arm: dts: odroid: Add LDO10 regulator node necessary for TMU on
> > Odroid arm: dts: odroid: Enable TMU at Exynos4412 based Odroid U3
> > device arm: dts: Adding CPU cooling binding for Exynos SoCs
> > thermal: exynos: dts: Add default definition of the TMU sensor
> > parameter
> > thermal: dts: Default trip points definition for Exynos5420 SoCs
> > thermal: exynos: dts: Define default thermal-zones for Exynos4
> > thermal: dts: exynos: Trip points and sensor configuration data
> > for Exynos5440
> > thermal: exynos: dts: Provide device tree bindings identical to
> > the one in exynos_tmu_data.c
>
>
> Thanks a lot.
>
> >
> > .../devicetree/bindings/thermal/exynos-thermal.txt | 17 +
> > arch/arm/boot/dts/exynos3250.dtsi | 2 +
> > arch/arm/boot/dts/exynos4-cpu-thermal.dtsi | 52 +++
> > arch/arm/boot/dts/exynos4.dtsi | 4 +
> > arch/arm/boot/dts/exynos4210-trats.dts | 19 +
> > arch/arm/boot/dts/exynos4210.dtsi | 30 +-
> > arch/arm/boot/dts/exynos4212.dtsi | 5 +-
> > arch/arm/boot/dts/exynos4412-odroid-common.dtsi | 27 ++
> > arch/arm/boot/dts/exynos4412-tmu-sensor-conf.dtsi | 24 ++
> > arch/arm/boot/dts/exynos4412-trats2.dts | 15 +
> > arch/arm/boot/dts/exynos4412.dtsi | 5 +-
> > arch/arm/boot/dts/exynos4x12.dtsi | 1 +
> > arch/arm/boot/dts/exynos5250.dtsi | 29 +-
> > arch/arm/boot/dts/exynos5420-trip-points.dtsi | 35 ++
> > arch/arm/boot/dts/exynos5420.dtsi | 28 ++
> > arch/arm/boot/dts/exynos5440-tmu-sensor-conf.dtsi | 24 ++
> > arch/arm/boot/dts/exynos5440-trip-points.dtsi | 25 ++
> > arch/arm/boot/dts/exynos5440.dtsi | 18 +
> > drivers/cpufreq/exynos-cpufreq.c | 33 +-
> > drivers/thermal/samsung/Makefile | 2 -
> > drivers/thermal/samsung/exynos_thermal_common.c | 427
> > ---------------------
> > drivers/thermal/samsung/exynos_thermal_common.h | 106 -----
> > drivers/thermal/samsung/exynos_tmu.c | 348
> > +++++++++++------
> > drivers/thermal/samsung/exynos_tmu.h | 76 +---
> > drivers/thermal/samsung/exynos_tmu_data.c | 264
> > ------------- include/dt-bindings/thermal/thermal_exynos.h |
> > 28 ++ 26 files changed, 636 insertions(+), 1008 deletions(-) create
> > mode 100644 arch/arm/boot/dts/exynos4-cpu-thermal.dtsi create mode
> > 100644 arch/arm/boot/dts/exynos4412-tmu-sensor-conf.dtsi create
> > mode 100644 arch/arm/boot/dts/exynos5420-trip-points.dtsi create
> > mode 100644 arch/arm/boot/dts/exynos5440-tmu-sensor-conf.dtsi
> > create mode 100644 arch/arm/boot/dts/exynos5440-trip-points.dtsi
> > delete mode 100644 drivers/thermal/samsung/exynos_thermal_common.c
> > delete mode 100644 drivers/thermal/samsung/exynos_thermal_common.h
> > delete mode 100644 drivers/thermal/samsung/exynos_tmu_data.c create
> > mode 100644 include/dt-bindings/thermal/thermal_exynos.h
> >
> > --
> > 2.0.0.rc2
> >
--
Best regards,
Lukasz Majewski
Samsung R&D Institute Poland (SRPOL) | Linux Platform Group
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
