On Fri, Jan 23, 2015 at 01:09:53PM +0100, Lukasz Majewski wrote: > 1. Introduction > > Following patches aim to clean up the current implementation of the thermal > framework on Exynos devices. > > The main goal was to use a generic code for reading thermal configuration > (of-thermal.c). Due to that redundant exynos_thermal_common.[h|c] files > were removed. > > Around 400 lines of code (LOC) were removed directly by this patch, which > is around 20% of the Exynos thermal code base. > > This work should NOT bring any functional changes to Exynos thermal > subsystem. > > 2. Patch-set structure > > Then the cpu_cooling functionality has been preserved to allow cooling > devices by reducing operating frequency. Definition of trip points and > cpufreq's cooling properties were moved to device tree. > > Then the rework of the way in which configuration data is provided to > the Exynos thermal subsystem was performed. Now device tree is used for > configuration. > > 3. Dead code removal > > Thermal support for some SoCs, previously available in the exynos_tmu_data.c > file, was removed since, as of (almost) 3.19-rc3, they didn't have TMU bindings. > > Moreover, support for cpu_cooling devices was preserved only on those > SoCs which had available and working cpufreq driver. > > 4. Testing > > Test devices: > - Exynos4210 - Trats (TMU zone + cpu_cooling) > - Exynos4412 - Trats2/Odroid U3 (TMU zone + cpu_cooling) > - Exynos5250 - Arndale (TMU zone + cpu_cooling) > - Exynos5420 - Arndale-octa (only TMU zones) > > Unfortunately, I don't posses Exynos5440 for testing. Its functionality > has been preserved in the code, but not tested on the hardware. I would > be grateful for help in testing. > > > 5. This work apply on the following tree: > > kernel.org: 'linux-soc-thermal/next' - Eduardo Velentin's tree > SHA1: 1813d80874699145f04af6b05ebab0a6419001fb > > > Lukasz Majewski (18): I have applied the following patches to my -fixes branch (for next rc cycle) > thermal: exynos: cosmetic: Correct comment format > thermal: exynos: Provide thermal_exynos.h file to be included in > device tree files > thermal: exynos: Modify exynos thermal code to use device tree for cpu > cooling configuration > cpufreq: exynos: Use device tree to determine if cpufreq cooling > should be registered > dts: Documentation: Extending documentation entry for exynos-thermal > dts: Documentation: Update exynos-thermal.txt example for Exynos5440 > thermal: samsung: core: Exynos TMU rework to use device tree for > configuration > thermal: exynos: Remove exynos_thermal_common.[c|h] files > thermal: exynos: Remove exynos_tmu_data.c file The patches below should go via platform tree: > arm: dts: trats: Enable TMU on the Exynos4210 trats device > arm: dts: odroid: Add LDO10 regulator node necessary for TMU on Odroid > arm: dts: odroid: Enable TMU at Exynos4412 based Odroid U3 device > arm: dts: Adding CPU cooling binding for Exynos SoCs > thermal: exynos: dts: Add default definition of the TMU sensor > parameter > thermal: dts: Default trip points definition for Exynos5420 SoCs > thermal: exynos: dts: Define default thermal-zones for Exynos4 > thermal: dts: exynos: Trip points and sensor configuration data for > Exynos5440 > thermal: exynos: dts: Provide device tree bindings identical to the > one in exynos_tmu_data.c Thanks a lot. > > .../devicetree/bindings/thermal/exynos-thermal.txt | 17 + > arch/arm/boot/dts/exynos3250.dtsi | 2 + > arch/arm/boot/dts/exynos4-cpu-thermal.dtsi | 52 +++ > arch/arm/boot/dts/exynos4.dtsi | 4 + > arch/arm/boot/dts/exynos4210-trats.dts | 19 + > arch/arm/boot/dts/exynos4210.dtsi | 30 +- > arch/arm/boot/dts/exynos4212.dtsi | 5 +- > arch/arm/boot/dts/exynos4412-odroid-common.dtsi | 27 ++ > arch/arm/boot/dts/exynos4412-tmu-sensor-conf.dtsi | 24 ++ > arch/arm/boot/dts/exynos4412-trats2.dts | 15 + > arch/arm/boot/dts/exynos4412.dtsi | 5 +- > arch/arm/boot/dts/exynos4x12.dtsi | 1 + > arch/arm/boot/dts/exynos5250.dtsi | 29 +- > arch/arm/boot/dts/exynos5420-trip-points.dtsi | 35 ++ > arch/arm/boot/dts/exynos5420.dtsi | 28 ++ > arch/arm/boot/dts/exynos5440-tmu-sensor-conf.dtsi | 24 ++ > arch/arm/boot/dts/exynos5440-trip-points.dtsi | 25 ++ > arch/arm/boot/dts/exynos5440.dtsi | 18 + > drivers/cpufreq/exynos-cpufreq.c | 33 +- > drivers/thermal/samsung/Makefile | 2 - > drivers/thermal/samsung/exynos_thermal_common.c | 427 --------------------- > drivers/thermal/samsung/exynos_thermal_common.h | 106 ----- > drivers/thermal/samsung/exynos_tmu.c | 348 +++++++++++------ > drivers/thermal/samsung/exynos_tmu.h | 76 +--- > drivers/thermal/samsung/exynos_tmu_data.c | 264 ------------- > include/dt-bindings/thermal/thermal_exynos.h | 28 ++ > 26 files changed, 636 insertions(+), 1008 deletions(-) > create mode 100644 arch/arm/boot/dts/exynos4-cpu-thermal.dtsi > create mode 100644 arch/arm/boot/dts/exynos4412-tmu-sensor-conf.dtsi > create mode 100644 arch/arm/boot/dts/exynos5420-trip-points.dtsi > create mode 100644 arch/arm/boot/dts/exynos5440-tmu-sensor-conf.dtsi > create mode 100644 arch/arm/boot/dts/exynos5440-trip-points.dtsi > delete mode 100644 drivers/thermal/samsung/exynos_thermal_common.c > delete mode 100644 drivers/thermal/samsung/exynos_thermal_common.h > delete mode 100644 drivers/thermal/samsung/exynos_tmu_data.c > create mode 100644 include/dt-bindings/thermal/thermal_exynos.h > > -- > 2.0.0.rc2 >
Attachment:
signature.asc
Description: Digital signature
