Hello!
Lukasz Majewski wrote:
>> The point is that I'm still working with a rather old version of the
>> cpufreq series, a version which still had the Exynos4x12 code in it
>> (this was removed later, if I remember correctly because of problems
>> with how to properly describe boost configuration in DT).
>
> Is your board Odroid-U3/Trats2 ?
It's an Odroid-X2, so pretty similar to the U3, except that it doesn't
have any active cooling device.
>> Anyway, to not get completly off-topic here, I noticed some small
>> issue with v3 of the thermal series. I've enabled
>> CONFIG_THERMAL_HWMON so that I can use lm_sensors to query
>> temperature of the board. However while the thermal_zone is created,
>> there is no hwmon node to be found.
>
> I'm not surprised, that some use cases (about which I wasn't even
> aware) show up.
> I've already fixed issues reported by Abhilash (with v5 and a following
> patch) and look closer into the THERMAL_HWMON.
The problem seems to be that of_parse_thermal_zones always sets
'no_hwmon' to true, so that thermal_zone_device_register never registers
a hwmon device when the underlaying thermal zone is setup through DT. I
don't understand the rationale behind this, even with the comment ('No
hwmon because there might be hwmon drivers registering').
> I've also done some work regarding FAN controlled by hwmon for Odroid
> U3.
> Could you look on following series:
> http://www.spinics.net/lists/linux-samsung-soc/msg40471.html
>
> I can only guess that your board might need similar entries for your
> DTS file(s).
Like I said, the X2 only has a passive heatsink, so no fan controlling here.
With best wishes,
Tobias
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
