On Wed, Jan 14, 2015 at 02:52:25PM -0400, Eduardo Valentin wrote:
> On Wed, Jan 14, 2015 at 02:41:07PM +0100, Lukasz Majewski wrote:
> > Properties necessary for providing Exynos thermal configuration via device
> > tree.
> >
> > Signed-off-by: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
> > ---
> > Changes for v3:
> > - New patch
> >
> > ---
> > .../devicetree/bindings/thermal/exynos-thermal.txt | 17 +++++++++++++++++
> > 1 file changed, 17 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt
> > index ae738f5..0f44932 100644
> > --- a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt
> > +++ b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt
> > @@ -39,6 +39,18 @@
> > - vtmu-supply: This entry is optional and provides the regulator node supplying
> > voltage to TMU. If needed this entry can be placed inside
> > board/platform specific dts file.
> > +Following properties are mandatory (depending on SoC):
> > +- samsung,tmu_gain: Gain value for internal TMU operation.
> > +- samsung,tmu_reference_voltage: Value of TMU IP block's reference voltage
> > +- samsung,tmu_noise_cancel_mode: Mode for noise cancellation
> > +- samsung,tmu_efuse_value: Default level of temperature - it is needed when
> > + in factory fusing produced wrong value
> > +- samsung,tmu_min_efuse_value: Minimum temperature fused value
> > +- samsung,tmu_max_efuse_value: Maximum temperature fused value
> > +- samsung,tmu_first_point_trim: First point trimming value
> > +- samsung,tmu_second_point_trim: Second point trimming value
> > +- samsung,tmu_default_temp_offset: Default temperature offset
> > +- samsung,tmu_cal_type: Callibration type
> >
> > Example 1):
> >
> > @@ -51,6 +63,7 @@ Example 1):
> > clock-names = "tmu_apbif";
> > status = "disabled";
> > vtmu-supply = <&tmu_regulator_node>;
> > + #include "exynos4412-tmu-sensor-conf.dtsi"
> > };
> >
> > Example 2):
> > @@ -61,6 +74,7 @@ Example 2):
> > interrupts = <0 58 0>;
> > clocks = <&clock 21>;
> > clock-names = "tmu_apbif";
> > + #include "exynos5440-tmu-sensor-conf.dtsi"
>
> Did I miss something or at this point the above file does not exist yet?
>
> Please make sure each commit / patch is in a compilable/usable/working
> state.
I know this is a Documentation file, but the comment above still
applies.
>
> > };
> >
> > Example 3): (In case of Exynos5420 "with misplaced TRIMINFO register")
> > @@ -70,6 +84,7 @@ Example 3): (In case of Exynos5420 "with misplaced TRIMINFO register")
> > interrupts = <0 184 0>;
> > clocks = <&clock 318>, <&clock 318>;
> > clock-names = "tmu_apbif", "tmu_triminfo_apbif";
> > + #include "exynos4412-tmu-sensor-conf.dtsi"
> > };
> >
> > tmu_cpu3: tmu@1006c000 {
> > @@ -78,6 +93,7 @@ Example 3): (In case of Exynos5420 "with misplaced TRIMINFO register")
> > interrupts = <0 185 0>;
> > clocks = <&clock 318>, <&clock 319>;
> > clock-names = "tmu_apbif", "tmu_triminfo_apbif";
> > + #include "exynos4412-tmu-sensor-conf.dtsi"
> > };
> >
> > tmu_gpu: tmu@100a0000 {
> > @@ -86,6 +102,7 @@ Example 3): (In case of Exynos5420 "with misplaced TRIMINFO register")
> > interrupts = <0 215 0>;
> > clocks = <&clock 319>, <&clock 318>;
> > clock-names = "tmu_apbif", "tmu_triminfo_apbif";
> > + #include "exynos4412-tmu-sensor-conf.dtsi"
> > };
> >
> > Note: For multi-instance tmu each instance should have an alias correctly
> > --
> > 2.0.0.rc2
> >
Attachment:
signature.asc
Description: Digital signature
